Question about HP DeskJet F380 All-In-One Printer

1 Answer

Need driver cd

Last e-mail listed wrong e-mail address. See address below. My computer is so slow that I have to type each character then wait 1 second to make sure it posts. That's why the l;ast address was wrong... I got oing to fast.I need a cd for the installation of the driver for my HP Deskjet F380 all-in-one printer. Thanks.

Posted by on

  • Dawn
    Dawn May 11, 2010

    What Operating system are you running??? I didn't see your last post.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,305 Answers

Go directly to hp.com and type in your model number in the box requesting your model number... it'll take you directly to their list of drivers according to operating system software ...
Make a hard copy for your self after you download... good for future reference...
k

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Recently you switch Hotmail to Outlook. Since then I can't have no more web, All is block and I Wonder why? What have I done wrong? Please I need help.


Hi,
I think no any issue create because all function is same and i also used hotmail to outlook email used and also new version available. Or no change ID or password, just change look or services, but function is same. If you have problem link not open email not sent mail, account related issue, setting issue, or browsing issue just go to outlook help and search you own problem, there step by step problem solved or contact hotmail technician.

Check your Junk folder
1. Sign in to Outlook.com account.
2. Click on Junk on the left pane.
3. Check to see if the missing mail is in this folder.
4. If you see any messages that should have been delivered to the Inbox, click the Not Junk.
Check your Blocked sender list
1. From your Inbox, click the cog icon.
2. Select More Mail Options .
3. Under "Preventing junk email", click Safe and blocked senders.
4. Click Blocked senders.
5. In the Blocked senders list, select the name or domain (the part of an e-mail address that follows the @ sign, such as outlook.com) that you want to receive emails from.
6. Click << Remove from list.
Add the email address to your Safe senders list
1. From your Inbox, click the cog icon .
2. Select More Mail Options .
3. Under "Preventing junk email", click Safe and blocked senders.
4. Click Safe Senders.
5. In the text box, type in the email address or domain you'd like to always receive emails from.
6. Click Add to list >>.
Check your Email Rules
1. From your Inbox, click the cog icon.
2. Select More Mail Options .
3. Click Rules for sorting new messages under "Customizing Outlook".
2. Perform one of the actions as per your requirement:
Click Edit next to the rule that you want to edit.
Or
Choose the rule that you want to delete and click Delete.
Note: Not all international characters are supported as filters.
Check your Junk Mail Settings
1. From your Inbox, click the cog icon.
2. Select More Mail Options.
3. Under "Preventing junk email", click Filters and reporting.
3. Under "Choose a junk e-mail filter", choose the level of protection that you want, and then click Save. If the Exclusive level was set, all emails will go directly to your Junk folder except for messages from your contacts and email addresses that are in your safe senders, Outlook service announcements, and alerts that you signed for.
4. Click Save.
To go back to your inbox, click Outlook on the top left portion of the screen.
Check your Reply-to address
1. From your Inbox, click the cog icon.
2. Select More Mail Options .
3. Under "Writing email", click Reply-to address.
2. Select the radion button beside Current e-mail address.
3. Click Save.

Thanks
Hotmail Support

Sep 21, 2013 | hotmail.com

Tip

How to solve wireless/internet connection problems on Wii Consoles


You can try the following steps below as it should solve wireless/internet connection problems on your Wii console :

If you are using WEP or WPA security on your router try this:

1. Log into the router using the default IP (consult your router's manual for assistance).
2. Locate the "wireless security" section of your router settings and find the WEP or WPA key.
3. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F.
4. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F.
5. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters).
6. If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot.
7. If you are using WPA, the Wii console is compatible with the following types:
* WPA - PSK (TKIP)
* WPA - PSK (AES)
* WPA2 - PSK (AES)

But if your WEP or WPA key is correct, then the problem might be related to MAC address filtering:

1. From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model).
2. If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings).
3. If the Mac address filter was disabled, then continue troubleshooting.

Check Nintendo's router info for special notes, if available, for your router.

1. go to our Wireless Router look up page.
2. Use the drop-down box to select, if available, your router manufacturer.
3. Click on your router's model number, if available.
4. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

Lastly, Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router.

Try to connect the Wii console online and test for proper response.

Good luck.

on Oct 23, 2010 | Video Game Consoles & Games

1 Answer

I WENT ONLINE TO REGISTER, I HAD TO SIGN IN FIRST. WHEN I TRIED LOGGING IN, IT WOULD NOT LET ME SO I CLICK ON FORGOT PASSWORD, AND I NEVER RECEIVED AN EMAIL SO THAT I COULD REINTER MY PASSWORD. THANK...


Check for the mail in spams folder may be there you find it .If not then add microsoft or the operating system vendors e-mail to your safe list in your e-mail address to do such 1.open your e-mail address ,point to add contact 2.type the e-mail address and click next and last save you are done
if even you still don't recieve the e-mail then there is a probability that you have entered a wrong e-mail adddress while registering with the operating system vendor online.

Dec 27, 2010 | Computers & Internet

1 Answer

How do i open my aol account without error showing


Open an Internet browser. Afterwards, go to the address bar and type in http://www.aol.com/ to access AOL's website.

Provide needed information. Once in the website, click on Get Free Mail tab located at the left hand side, just right below the My Links tab. You will be directed to another page where your vital user information will have to be provided. Type in your first and last name in the corresponding text fields. After that, enter your desired email address. This should be within 3 to 16 characters and should start with a letter. After that, provide your desired password. This should consist of at least 6 characters. The maximum for the password would be 16 characters. Afterwards, re-type the password in the respective text field.
hope it helps if so, do rate the solution

Nov 28, 2010 | HP Pavilion dv6000z Notebook

1 Answer

Mails sent do not reach their destination. It appears in the Outlook sent as sent.


To check the exact reason - we have to follow few steps one by one as follows.

Due to following reasons mails may not reach their destinations,

Other End Problems
1. Email address typed is wrong or does not exist.
2. There is problem with the email address - like inbox capacity is full, incoming mail server is down.
3. Recipient received the email not in inbox rather in bulk/junk box - so tell him/her to check junk/bulk box.
4. Your email address is blocked by them (recipients).

Your End problem
-------------------------
5. You have not clicked the option "Server Authentication" or other configuration problem you made.
6. There is virus problem in your computer creating malfunction for outgoing emails.
7. Your outgoing server problem.

So I am guiding how to check all points one by one tactfully to detect exact reason.

First verify the email address you typed - then you send email to the same email address from your different email.
Try to use same mail server (your end) for checking as some time few black listed mail servers are there.
You request the recipient to check the bulk/junk box - or send email waiting few hours.
Tell the recipient whether your email is blocked or the domain of your email address (as yahoo.com is domain of email lina@yahoo.com).

Now this is the very important point out of the all points - please consult with your mail server admin and check whether you have checked the Server Authentication Required option in mail client software like Outlook Express.
You please configure the same email in different computer (virus free) - try the same.
Wait few ours and send to other email addresses - and check.

I think you may easily rectify the problem.
Happy Computing.
I think I have been able to answer to solve the problem. Many Many thanks for using Fixya.

Oct 29, 2010 | Microsoft Computers & Internet

1 Answer

How do i watch i-player through my wii? got wireless connection,but got error code 51330 hope you can help,thanks!


Hello,

The error code 51330 on Wii usually indicates that there is a problem relating to wireless security. You can try the following steps below as it should solve the problem:

If you are using WEP or WPA security on your router try this:

1. Log into the router using the default IP (consult your router's manual for assistance)
2. Locate the "wireless security" section of your router settings and find the WEP or WPA key.
3. If you are using 64-bit encryption, the WEP Key must be a 10-character key consisting of numbers or letters A through F.
4. If you are using 128-bit encryption, the WEP Key must be a 26-character key consisting of numbers or letters A through F.
5. The WEP Key must be a Hexadecimal (0-9, A-F, no other special characters or letters).
6. If your router has multiple slots for a WEP Key, make sure the active key is the one in the #1 slot.
7. If you are using WPA, the Wii console is compatible with the following types:
* WPA - PSK (TKIP)
* WPA - PSK (AES)
* WPA2 - PSK (AES)

But if your WEP or WPA key is correct, then the problem might be related to MAC address filtering:

1. From the router settings, locate the "MAC address filter" settings (also known as "access control", "access list", or "network filter" depending on your router model).
2. If the Mac address filter is set to "enabled", then you must add the Wii's MAC address to the "allowed" list. You can locate the Wii's MAC address from the "console information" page (located under "Internet" in the Wii Settings).
3. If the Mac address filter was disabled, then continue troubleshooting.

Check Nintendo's router info for special notes, if available, for your router.

1. go to our Wireless Router look up page.
2. Use the drop-down box to select, if available, your router manufacturer.
3. Click on your router's model number, if available.
4. Read any "special notes" at the top of the router's page. Many issues can be solved by changing settings described in the "special notes."

Lastly, Power cycle your router and modem by unplugging them both from the wall. Wait a few minutes, and plug the modem back in. Wait a couple of minutes for the modem to initialize, then turn on the router. Try to connect the Wii console online and test for proper response.

I hope the above solves your problem.

Good luck.

Oct 23, 2010 | Nintendo Video Game Consoles & Games

1 Answer

I have a netgear wgr614 v9 router but have problems with slow speed to my ps3 desk top and wireless laptop i have virgin 10meg broadband but have connection conflicts


you to port forward. call Sony tech support to ask what port to be forwarded using Netgear router. Then follow this steps below...

Port Forwarding

A. Determining the IP Address and MAC Address of a Computer:

Note: Please use the computer for which the Ports are to be opened:

For Windows 2000/XP users:

1. Please click on Start and select Run.
2. Type in cmd and click on OK.
3. In the Command Prompt, please type ipconfig/all then press Enter or Return key.
4. Please make sure that the Ethernet adapter has an IP Address that is the same range as the router (e.g. 192.168.1.2 for the computer and 192.168.1.1 for the router).
5. Please note down the IP address and Physical address.

B. Reserving an IP Address:

1. Please open any web browser like Internet Explorer or Mozilla Firefox.
2. Connect to the router by typing http://routerlogin.com/basicsetting.htm or http://192.168.1.1 in the address field and click Enter or Return key.
3. A window will prompt for a username and password. The default username is "admin" and the default password is "password".

Note: Username and password are case sensitive. If it does not take password as the password, you might have changed it when you ran the NETGEAR Setup CD so please try other passwords.

4. When the setup page opens, click on LAN IP Setup under Advanced tab.
5. Click on Add under Address Reservation.
6. Under Address Reservation window, please select the radio button of the computer you wish to add from the Address Reservation Table.
7. If the computer you want is not on the list, please click on the Refresh button to update the table.
8. If the computer is still not on the Address Reservation Table, please type in the IP Address, MAC Address (Physical Address), and Device Name of the computer you wish to add.
9. Click the Add button when done.

C. Opening Pre-Defined Ports for Internet Services:

1. Click on the option with the name Port Forwarding/Port Triggering under the Advanced menu.
2. Please select the service type Port Forwarding. The router pre-defined services are listed there.
3. From the Service Name pull down list, select the service that needs to be hosted.
4. Enter the IP address of the computer in the Server IP Address box.
5. Click the Add or Apply button.
6. Repeat all steps to open more ports.

Note: If the name of the Internet service does not appear in the drop down list, you may manually open the ports for that Internet service. Please follow the steps below:

D. Opening Ports for Games, Applications or Custom Ports:

1. Click on Add Custom Service button.
2. Type the service name in the Service Name box and the lower range numbers in the Starting Port box.
3. If the application uses only a single port; type in the same port number in the Ending Port box.
4. If the application uses a range of ports; type in the higher range numbers in the Ending Port box.
5. Type the IP address of the computer in the Server IP Address box. Click Apply button.
6. It will then refresh to the Port Forwarding page, and will show the list of all ports opened in tabulation.
7. Repeat all steps to add more ports for more services.

E. To Edit or Delete a Service Entry:

1. Click on the Radio Button that needs to be Edited /Deleted, under the Port Forwarding page.
2. Modify the information from the Service Name, Starting Port, Ending Port, and the Server IP Address, and then click the Apply button.

Apr 21, 2010 | NetGear WGR614 Wireless Router

1 Answer

When I try to print the computer says I have the wrong port for my lexmark X5650ex printer.


  1. Create a folder on your desktop and call it Lex1020.
  2. Detach the requisite bin file (JETBIN1020.BIN) to the folder you have just created.
  3. In Windows, go to Start, Programs, MS-DOS Prompt.
  4. At the DOS prompt (C:WINDOWS>) type:
    cd desktop
    and press ENTER.

  5. Then type:
    cd Lex1020
    and press ENTER.
  6. Then type:
    copy/b jet1020.bin LPT1:
    and press ENTER.
    As shown below, the following line should appear just below the last command you typed in:
    1 file(s) copied
    enus461_dos_en_uk.gif
    The Lexmark 1020 Control Program will now appear. It should print out a line containing some gibberish characters and also the words Lexmark Color Jetprinter 1020.

Feb 21, 2010 | Office Equipment & Supplies

1 Answer

Im laggin on psu a game only 1 connection it only du it once a few days n it lasts 4eva please help its to do with modem or router


You need to do port forwarding. Call PS3 tech support to get the port numbers to opened to your Netgear Router. And follow this procedure.

Port Forwarding

A. Determining the IP Address and MAC Address of your PS3:

Note: Please use the computer for which the Ports are to be opened:

For Windows 2000/XP users:

1. Please click on Start and select Run.
2. Type in cmd and click on OK.
3. In the Command Prompt, please type ipconfig/all then press Enter or Return key.
4. Please make sure that the Ethernet adapter has an IP Address that is the same range as the router (e.g. 192.168.1.2 for the computer and 192.168.1.1 for the router).
5. Please note down the IP address and Physical address.

B. Reserving an IP Address:

1. Please open any web browser like Internet Explorer or Netscape Navigator.
2. Connect to the router by typing or http://192.168.1.1 or http://192.168.0.1 in the address field and click Enter or Return key.
3. A window will prompt for a user name and password. The default username is "admin" and the default password is "password".

Note: If it does not take password as the password, you might have changed it when you have run the NETGEAR Setup CD so please try other passwords. If you cannot remember the password, you need to reset the router and run the Setup CD to reconfigure it.

4. When the setup page opens, click on LAN IP Setup under Advanced tab.
5. Click on Add under Address Reservation.
6. Under Address Reservation window, please select the radio button of the computer you wish to add from the Address Reservation Table.
7. If the computer you want is not on the list, please click on the Refresh button to update the table.
8. If the computer is still not on the Address Reservation Table, please type in the IP Address, MAC Address (Physical Address), and Device Name of the computer you wish to add.
9. Click the Add button when done.

C. Opening Pre-Defined Ports for Internet Services:

1. Click on the option with the name Port Forwarding/Port Triggering under the Advanced menu.
2. Please select the service type Port Forwarding. The router pre-defined services are listed there.
3. From the Service Name pull down list, select the service that needs to be hosted.
4. Enter the IP address of the computer in the Server IP Address box.
5. Click the Add or Apply button.
6. Repeat all steps to open more ports.

Note: If the name of the Internet service does not appear in the drop down list, you may manually open the ports for that Internet service. Please follow the steps below:

D. Opening Ports for Games, Applications or Custom Ports:

1. Click on Add Custom Service button.
2. Type the service name in the Service Name box and the lower range numbers in the Starting Port box.
3. If the application uses only a single port; type in the same port number in the Ending Port box.
4. If the application uses a range of ports; type in the higher range numbers in the Ending Port box.
5. Type the IP address of the computer in the Server IP Address box. Click Apply button.
6. It will then refresh to the Port Forwarding page, and will show the list of all ports opened in tabulation.
7. Repeat all steps to add more ports for more services.

E. To Edit or Delete a Service Entry:

1. Click on the Radio Button that needs to be Edited /Deleted, under the Port Forwarding page.
2. Modify the information from the Service Name, Starting Port, Ending Port, and the Server IP Address, and then click the Apply button.

Apr 26, 2009 | NetGear MR814 Wireless Router

1 Answer

Wireless connection


You must obtain/set up one.

1. hook up a computer to one of the numbered ports on the back(eTHERNET CABLE. Like a phone jack but longer.)
2. wait untill the computer says it is connected.
3. open your internet browser, and go to this address: http://192.168.1.1(the routers internal setup)
4. type in "admin" in both boxes.(if you havent set up a password yet)
5. go to "wireless", "Wireless Security"(bar below first one), either choose DISABLED(you will not be protected from strangers accessing your internet, slowing yours down) or one of the choices and type anything in(recommend 15+ characters, better yet random. WRITE THIS DOWN.)
6. Click save changes
7. Go on your wireless enabled computer, and if you used a key, enter it, otherwise it should connect

Feb 21, 2008 | Linksys Wireless-G WRT54G Router

Not finding what you are looking for?
HP DeskJet F380 All-In-One Printer Logo

60 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Seeker5211
Seeker5211

Level 3 Expert

1089 Answers

kakima

Level 3 Expert

102366 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...