Adding new extension to Nortel Norstar Meridian Phone System
My office just got new wall jacks for voice and data for new desks.
Now in my phone closet, phone patch panel has corresponding slots with the new wall jacks.
The problem is I do not know how to connect the patch panel to my Meridian Phone system. (Thin wires that goes into panels)
If there is a website telling me how to do install wires and add new extension to telephone directory, please let me know. Thanks. Just same problem i want to add more extentions but i dont know how.
An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: Adding new extension to Nortel Norstar Meridian Phone...
You should have a panel designated for the system phones only and a panel for your wall jacks.
you only need to take two wires from the designated phone extension you want to activate to the wall jack you need activated. If you have a RJ 45 panel all you need to do is patch one end to the system phone port and the other end to the wall jack port make sure on the back side of the panel that the wires are punched down. The thin wires will need to be punched down with a special punch tool that you can purchase from Home depot or Lowes depending on what kind of panel it is. White/Blue,Blue/White,White/Org.Org/White.White Green/Grn/White.White/Brown.Brown/White.Solid White with violet color stripe.Solid Violet with white stripe is the color code in which to punch down for each cable. What city are you in may i ask?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
AvayaNORTEL NETWORKS is a trademark of Nortel Networks. ... All other trademarks and registered trademarks are the property of their ... One-line and two-line displays . ...Memory buttons . ... Call anomalies for telephones without line buttons . .... Select how you dial your calls . ... Receive a busy signal on an internal call .
Nortel Networks Meridian Norstar How to program voice mail phone feature codes ...Modular ICS KSU must be programmed with an M7310 or a M7324 telephone. ... Lift handset, press Voice Call key or press the Feature button, then press 66 2. .... At the LOG: prompt, enter your mailbox#(extension #. and your password all ...
A Nortel Key Service Unit, an ICS (MICS,CICS), BCM (50,100 etc), Norstar (308,616,824), an Avaya IP Office running Nortel cards, or there is another company that makes a Nortel emulation key system but I can't recall what it is right now.
Extension in use means there is not enough battery showing on the line. On our Nortel phone, unplugging the line cord gets the same result (actually check tel line because it's no voltage). Take a phone out to the demarc point outside and plug it into the jack there. If you don't have dial tone, report it to the telco. If you do, then you have an inside wiring problem.
There is a feature built-in to the norstar system called "Set Relocation". When this feature is turned on, you can move a working extension to an unused/activated jack and the extension, features and mailbox will stay with the phone.
Have your system administrator turn the feature on, then move up to 2 phones at a time. The phone will go through 2 bootup sessions - be patient and don't unplug the phone.
The system has a built-in feature called "Set Relocation", which will
allow you to move your phone to another active telephone jack in your
office and the extension number, voicemail box, and all features will
stay with your phone.
Have your system administrator turn on Set Relocation, or check your
Norstar administration manual for programming details. Or, you
can call your telecom service company and have them send a technician.
There is no power cord required for an M7310 set. The set gets all the power from the Nortel telephone system.
Try plugging in your phone where another phone is active to ensure that your phone that you want to install is working. The phone flashes, then stops, then flashes, then stops... you just have to be patient when testing.
-> It maybe the line cord, the cord that plugs in from the wall to the phone that can be damaged.
-> the jack might be dead (wiring in the jack is pulled off) or inactive (there is no jumper from the office to the telephone system).
-> the phone port from the telephone system might be dead.
They should have terminated your voice on a block in your phone room. If that is the case you now need a punch down tool and a spool of cross connect wire. You would punch down one side of the cross connect wire on the tip and ring of the switch pairs and the other end of the cross connect wire on the blue pair of your station cable.