We have a 3000 sq ft split level house, so range is critical (could we extend range with antennas,...
(More)
We have a 3000 sq ft split level house, so range is critical (could we extend range with antennas, access points)?
Stability and reliability are also critical
We use a comcast cable modem
Must support mixed environment - 2 Macs connecting wirelessly, 2 PCs (1 with a wired connection)
We all want to be able to share a printer (which will connect to router with a wired connection)
Network attached storage, media streaming - I'm not worried about these now, looking for basic connectivity. Though would be great if I could grow into this in the future...
D-link WBR-2310 wont set up. A long time ago when we first bought this router, we had it set up and...
(More)
D-link WBR-2310 wont set up. A long time ago when we first bought this router, we had it set up and working fine. We kept getting disconnections every now and then so we bought a new Belkin router, which worked fine then, but its pretty cheap and only offers 54mbs wireless and now with 4 computers connecting wirelessly, internet is slow and we are left with trying the DLink again, hoping the firmware updates have resolved the disconnection problem. Anyways, the problem with the router is it just wont connect from the very start. I did everything step by step, turned off everything, plugged the modem to the router, router to the computer (last used on the modem), and turned everything on. All I get from the router is ALL lights lit up, and no connection. So I reset the router by pressing the button in the hole, and with everything back to defaults my computer connected to the router. I went to the routers page and it asked for a firmware update to proceed. So I had to set up my computers internet connection again to the modem, I downloaded the firmware update, and set up the Dlink again, ALL lights were on again, so I reset the router, connected, went to the routers page, gave it the update. As soon as it updated... ALL lights turned on again, instant disconnection from the computer. So I figured maybed its setting itself up, I'll leave it be for a bit... Hour later, still the Dlink is locked up. Someone help please.
I want to change the local IP address of the Billion 400G from 10.0.0.2 to something in the range...
(More)
I want to change the local IP address of the Billion 400G from 10.0.0.2 to something in the range of192.168.1.X. How can I?
my netgear rangemax does not emit a steady wifi signal. if i plug in my computer, the internet is...
(More)
my netgear rangemax does not emit a steady wifi signal. if i plug in my computer, the internet is working fine. all of the lights are on on the router. The wifi network shows up for a few minutes, goes away completely for a few, comes back, goes away, over and over again. I have tried resetting the modem, the router, and restoring factory settings. What can i do?