Question about Northwestern Bell 35807-4 Cordless Phone

Open Question

Lcd does not show complete letters or numbers one week old

My model: 35807-4 cordless phone purchased during the last week @ Rite Aid has a problem.The LCD does not show the complete letters or numbers.Example..the A has the lest leg missing the M has the right leg missing etc.I had the same problem after a few months with the 2.4 ghz model & returned it to Rite Aid for this one.NO ONE!!! calls back usin the need help phone number on the package.The first 2.4 also had a problem .the batteries would NOT!! keep a charge & I exchanged that one also.Rir Aid has done it's jon,now I feel that you should provide me with a fix for this phone,or send me new one that is tested & works properly at no charge & I would gladly return this one if you send me an RMA with a new phone.Hopefully their is a fix for this one.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Mysterious -PRO- message on the 26510

Fred,

Could the "PRO" stand for Program Mode? Is there a Program button or selection under Menu in which you can shut off a Program Mode?

Posted on Apr 10, 2008

Ranvens
  • 61 Answers

SOURCE: searching for a phone with special feature

Yes you can buy cordless phones with transfer capabilities. We have several of them at where I work.

The unidens are some of the better phones on the market. All we have to do with them is when we receive a call is hit the talk button again and dial the number we wish to send the call to.

Any of the unidens should have this feature you could ask the salesman if you can plug them in to test.

An example of a good phone is:
http://www.uniden.com/products/productdetail.cfm?product=TRU8885-2&page=6

Posted on Apr 24, 2008

saailer
  • 1868 Answers

SOURCE: NEED OWNERS MANUAL FOR BELL PHONE-2.4 GHz MODEL#

Google; "Bell Telephone 36028 free user guide"

Third selection is; Product Manual in PDF format; Click on this choice and manual loads. Then save pdf file.

FixYaWIZ.saailer@att.net

Posted on Dec 08, 2009

fullbar_28
  • 624 Answers

SOURCE: can not see my lcd screen

go to the cellpohone repair shop near you..
your lcd must be broken,,

you need to replace new one.

Posted on Jun 11, 2010

ginko
  • 19396 Answers

SOURCE: FF2150 FREEDOM PHONE. LOST MANUAL FOR IT AND HAVE

Hi.

Southwestern Bell Phone manuals are not available for online download. The company, which is part of AT&T, did not published online manual and keeps a strict policy on copyright.

Please to get the manual for this phone contact Southwestern Bell at 1-866-SBC-DIAL (1-866-722-3425)

Alternatively use the AT&T contact form.

Here the full contact page.

Regards.

Ginko

Posted on Jun 10, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The rinse aid is leaking out of my 1 yr old KD12WW1 dishwasher. Sometimes after only one wash it is completely depleted


Hello Dorothy Grieve,

My favorite site (appliancepartspros) is NOT showing
your model number...

Here (usa) the dispenser is about $50 to $60 to purchase.

I am thinking if you search for SPARES... with your
model number... you might have better success.

KD12WW1... rinse aid (not found)...
Kelvinator KD12WW1 91123003500 Dishwasher Rinse Aids

Lots of fun...
but the site needs some work to show all the "SPARES"

Use their number (Call Now 0844 49991110)...

Carnac the Magnificent

Jun 17, 2017 | Dishwashers

1 Answer

All three philips CD-150 phones display screens are not readable / only a few letters are visable


This is common with cordless phones. If the numbers starts to not show of face or disappear then it means the LCD is finished and needs to be replaced. Chances are that it would be more cost effective to buy a new TRIPPLE SET of phones as suppose to replacing the LCD's. Good examples are printers. It is cheaper to buy a brand new printer that comes with ink as suppose to buying new cartridges for the old one. Some parts and consumeables are just too expensive.

Hope this helps
enjoy :)

Dec 25, 2014 | Philips DECT CD1502 Duo Cordless Phone

1 Answer

Hi, I have an BOSH dishwasher SGV4313gb/17. It is about 8yrs old and has worked fine until last week when it did not complete its cycle. Have reset and it seems to complete cycle but I don't think it...


Are you using a rinse aid? if so and teh dishes are still not drying properly, try adjusting the setting for the rinse aid dispenser. Open the door of the dishwasher, open the flap where you pour in the rinse aid and look for the cirlce with the arrow and nunbers on it. If it is set low (1 or 2) try turning the arrow to a higher number. If that adjustment doesn't work, increase again and again until the dishes are dry.

Jan 05, 2011 | Bosch Dishwashers

1 Answer

Setting up my outgoing message: just purchased Uniden cordless DECT 1580. Manual says select command 8. How do I find Command 8? thanks, joan


Hi,

please follow the instruction to register the handset to base

To register a DCX150 accessory handset:
1. Charge the handset completely.
2.Place the handset in the base cradle for about thirty seconds. Handset Registering will appear in the LCD.
3.When the handset has registered to the base, the LCD will display Registration complete then show the handset ID number.

If the display shows Registration failed, repeat the process again.

To register a DCX200 or DCX300 accessory handset:

1.Charge the handset completely.
2.Disconnect the base AC adapter. Then press and hold find while you reconnect the adapter. Keep holding find until the charge LED starts to blink.
3.On the handset, press and hold # until the handset beeps and displays Handset Registering.
4.When the handset has registered to the base, the LCD will display Registration complete then show the handset
ID number.

If the display shows Registration failed, repeat the process again.

Thanx

Jul 21, 2010 | Uniden Cordless Phone

1 Answer

FI Code on Sears Oasis Washer


Called the recall dept. for Sears. Have an appointment set up for two weeks.Gave them my serial number and model number. The said if the parts show up prior to the two week time frame...call them and we could re-schedule the appointment.

Aug 15, 2009 | Kenmore Oasis HE 27082 Top Load Washer

1 Answer

The letters and numbers on the lcd screen are


I fixed my phone's LCD issues following the steps detailed in this guide:
http://www.instructables.com/id/Repair-a-Malfunctioning-LCD/

It makes sense when you think about it. Over time heat, falls, ect can cause the lcd cable's connection to degrade. This will cause artifacts and other issues with your display. I will admit the guide is a little scary looking for the non-tinkering types. But, it was not that hard to do and if the phone has a high price tag and no warranty service left it could be worth a shot.

Good luck!

Jul 26, 2009 | AT&T 2230 Cordless Phone

2 Answers

I have three handsets and two of the phones caller id is not show


yes if its fading out .its possible that the battery is causing this.also other possibility is that the internal cicuit of the device is moistened or may be needs to be resoldered as some connections may be loosened up too. its a common problem and will get fixed once above things are checked 1 by 1. thanks.

Jul 08, 2009 | Uniden Cordless Phone

1 Answer

My cordless phone is clicking when i dial.


Jeanne fist a background history lesson - there are two dialing modes in existence one is pulse or earlier on was known as decadic dialing. This is where the phone would break the connection a number of times to represent the number dialed. Remember the old dial phones that you would dial a nine and it would spin around back to its original position and would break the line nine times . Very Very slow way to Dial.

now to the 21st century - Tone dialing was invented also know as multi tone frequency dialing MFTD by sending two frequency tones numbers and symbols could be encoded to pass through the phone line quickly.

Solution
press menu / select option
select telephone settings
see picture below from user manual
vtech63021_dialing-qzscvkmecjaqgpyx21op0c4m-4-0.png

Jun 18, 2017 | Vtech Cordless 6041 Phone

Not finding what you are looking for?
Northwestern Bell 35807-4 Cordless Phone Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top Northwestern Bell Lands Phones Experts

Bruce Showalter

Level 2 Expert

79 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

14534 Answers

Are you a Northwestern Bell Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...