Question about Dell 1720dn Laser Printer

1 Answer

Dell 1720 flashinf replace drum- error.

Prints a sheet saying "the printer has stopped because the photoconductor kit3 has reached the end of its useful life. Please replace kit." Last week I changed the toner. Help this has been going on for 3 hours plus. Thanks D How can you tell once the counter has been reset? I have reset the counter following the instructions, but the page count is showing 98462. Should this reset to 0?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 4 Answers

I believe this message is occur because the laser printer drum needs to be replaced, not the toner cartridge.

These are two different things. The part is a DELL 310-8710 Drum Unit. Just google DELL 1720N drum and you should be able to find one.

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Our printer is saying it has stopped because the photoconductor kit has reached the end of its useful life.


You need to replace. It is also called the drum unit.

http://www.nextag.com/dell-1720-photoconductor/shop-html


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response

Thanks, Joe

Jan 19, 2011 | Dell 1720dn Laser Printer

1 Answer

Photoconductor kit? Dell 1700 printer


The photoconductor kit is another word for the drum or imaging drum. All three words refer to the same part.

Here is a link from the Dell site for this model.
http://accessories.us.dell.com/sna/PopupProductDetail.aspx?c=us&l=en&cs=dhs&sku=310-5404

Once you replace the drum, the printer has to be manually reset. If this is not done, the printer will continue to give this print out. By resetting it, the counter is set back to zero. The drum is good for around 30k prints.

From the Online Manual for the 1700, to reset the counter:
http://support.dell.com/support/edocs/systems/1700n/en/index.htm#online_documentation

To reset the counter, press and hold the Cancel button until all lights flash in sequence.

NOTICE: Resetting the imaging drum's counter without replacing the imaging drum may damage your printer and void your warranty.

Jun 18, 2010 | Dell 1700n Laser Printer

1 Answer

I change the ink cartage and get the message "the printer has stopped because the photoconductor kit has reached the end of its useful life" what does that mean


The Drum which is a separate part has reached it's end of life. WHen you pull out the toner cart, you press a little button that separates it from the drum. that drum also comes out. You can tell it's the drum becuase of the green roller. You can go to support.dell.com for info on removing the drum if you don't have the manual.

*Note* When you replace the drum, there is a procedure for resetting the drum count. The printer doesn't actually know you replaced the drum. You basically have to tell it. Now this trick will get the printer working right now with the old drum. However, you still need to get it replaced.

THis link will tell you how to replace the drum and reset the count. The directions are for the 1720, however, it will work for the 1710 as well.

http://support.dell.com/support/edocs/systems/prn1720/en/1720_en/en/d0e4183.html#maintaining-your-printer-chapter

Feb 05, 2010 | Dell 1710n Laser Printer

1 Answer

Dell 1720 laserjet printr


There should have been instructions with the replacment drum unit, for resetting the drum counter.

If not check your manual, or if you can't find it, download ot from Dell website

Oct 04, 2009 | Lexmark E238 Laser Printer

2 Answers

Flashing error and toner on Dell 1700 and will not print even after replacing drum and toner this happened before and I found on line sequence of pushing the buttons on printer to clear...but i can no


After replacing fysicalythe photoconductor/imagaging drum, leave the door open. Press and hold Cancel untl all lights flash in sequence to reset the printer. Close front cover.

May 28, 2009 | Dell 1700 Laser Printer

1 Answer

The photoconductor kit3 has reached the end of its useful life...please replace


...so replace the photoconductor...pick one up at any office supply store.

Apr 15, 2009 | Lexmark E232 Laser Printer

3 Answers

Dell 1720 flashinf replace drum- error.


The second link was the helpful information. Also, to cut through all of that --

If you need to reset the counter:

1. Remove drum kit with toner

2. Make sure all print jobs are flushed otherwise whatever has been sent and not printed will come spewing out.

3. Hold down CANCEL Button until all lights flash through.

4. Slide the drum kit and toner properly into the Printer.

done.

Mar 03, 2009 | Dell 1720dn Laser Printer

1 Answer

Is my Dell 1700 Laser Printer photoconductor drum truly fried?


The drum collects used toner for apprx. 30,000 pages. After that, the printer recommends that it be changed to prevent used toner from spilling internally into the printer's mechanisms. The whole photoconducter/drum can be replaced. The new part from Dell is apprx. $50.00 US. 
http://accessories.us.dell.com/sna/products/Printer_Accessories/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=310-8710#Overview

You might have reset the "counter" for the photoconducter. Ever  have a water  fillter with an electronic timer? You replace the filter, then you reset the timer? Perhaps you reset the timer without actually replacing the filter. So to speak. :)
The question you should ask yourself is: would I like to spend $30 - $60 [it's cheaper for refurbished parts- Google it] replacing the drum head on a 7 year old printer, or would I rather invest that in a new printer?

Feb 23, 2009 | Dell 1700n Laser Printer

6 Answers

Dell 1700 laser printer has Low toner and error lights flashing


Leave the printer on. Open the front and hold down the cancel button until all the lights are flashing in sequence. Close the front while still holding the cancel with the lights flashing and then release the cancel button. This should reset it.

Thanks

Nov 07, 2008 | Dell 1700n Laser Printer

Not finding what you are looking for?
Dell 1720dn Laser Printer Logo

1,665 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Office Equipment & Supplies Experts

The Knight
The Knight

Level 3 Expert

73619 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

color wheel light...
color wheel light...

Level 2 Expert

138 Answers

Are you a Dell Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...