Question about Washing Machines

3 Answers

Hotpoint Aquarius WF740

Hi my washer originally just kept washing for hours with 1 Min on clock, Then it wont work Error F07

any ideas??

Posted by on

  • 3 more comments 
  • DHwasher Dec 09, 2007

    I have the same problem with my WF740 washes for hours with 1min on timer then error F- 07 if I try another programme. Any ideas on this?

  • daddonk Jan 19, 2008

    hello yes i have similar problem but error f05 comes up but at the near end of a program and 1 minute goes on for ever when i finally get door open the washing is soaking wet.

    could this be that the water outlet pipe is to high and not letting water drain properly??

    i have drained the drain plug at the front bottom of machine and there was minimal dirt.

  • raegan May 01, 2008

    Hi, yes i have the same problem ! F-07 error will not clear from the LED screen, - can someone please help

  • Anonymous Sep 06, 2008

    f07 shows on some programmes but on others the machine will runn to 00;01 and stay there

  • Anonymous Sep 29, 2008

    my washer just keeps saying test!?

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hello again update on error f05 was a sock blockage in the black rubber tubing that connects from bottom of drum to the pump it was a easy fix just plastic clips holding it on make sure you turn off electric first lol !!!! all working fine now.

thanks daddonk

Posted on Jan 20, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My keep saying test

Posted on Dec 06, 2010

Ad

I've been told that f7 could be either the drainage valve blocked as f 5 post or the heating element.

Cheers,

John

Posted on May 14, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Hotpoint wf740 aquarius 1400 v noisy banging during spin = dust


It could be a broken drum restraint spring, or a worn or broken. or loose shock absorber.
To check the springs, remove the top cover, and you will see the springs.
Another possibility is the concrete weight could be broken or loose.
You need to remove the lower rear panel of washer to check the shockers and concrete weight.
Please rate my solution.
Thankyou.

Jan 31, 2010 | Hotpoint Aquarius WF000 Front Load Washer

3 Answers

How do you change brushes on a hotpoint aquarius washing machine


I have a Hotpoint Aquarius WF740. This does have brushes. Tilt the washing machine backwards & look underneath. The brushes can be seen on the motor housing, they are secured by two screws each.

Nov 11, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

My WF740 is also flashing F-05...unable to unlock door!!


The error F-05 indicates that no drain or pressure switch
jammed on full.

Sep 02, 2009 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Hotpoint Aquarius Wf740 F-08 just before rinse and spin.


Hi my Hotpoint WF740 keeps flashin H20. Does anyone know why please?

Jan 15, 2009 | Hotpoint Aquarius WF000 Front Load Washer

1 Answer

Hot point aquarius wf740


Hi.
F03 indicates that the wash thermistor is open or short circuit.
I think you need to call engineer to sort the problem
Please leave feedback.


Dec 02, 2008 | Hotpoint Aquarius WD640 Front Load...

3 Answers

Hotpoint wf740 washing machine


An F-05 error message means that the pressure switch is jammed on empty or a problem with pump.


The fault is associated with drain out (pump blocked or restricted in some way).

Small panel at rear of machine reveals the pump, pull of the two pipes (Plastic clips hard to get off, slide them sideways), remove wire and unclip pump from base of machine by lifting locking tab and sliding to the left, pump can then easily be cleaned.

Oct 01, 2008 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Filter


most hotpoint have a hidden filter
take back bottom panel off. you will see a large diameter hose coming from tub to pump. undo hose at tub end. filter is inside this hose. take it out and clean it

Jun 29, 2008 | Hotpoint Aquarius WF000 Front Load Washer

2 Answers

Hotpoint aquarius wf740


Sounds like water pressure could be low or inlet pipe is kinked.

F04: possible filling or water level problem. Check water inlet pipe (or shut-off valve), or the outlet pipe, or the pump or pump filter if accessible (check for blockages or foreign objects). Also could be the water valve solenoid weak, causing filling to be too slow.

F05: possible draining (pumping off) problem, check the pump filter, or pump, outlet pipe, or U-BEND.

Don't forget to rate!

Feb 27, 2008 | Hotpoint Aquarius WD63 Front Load...

1 Answer

Hotpoint washer model WF740


if it wont pull off theres somthing stuck in it

Feb 17, 2008 | Hotpoint Aquarius WF215 Front Load Washer

Not finding what you are looking for?
Washing Machines Logo

Related Topics:

935 people viewed this question

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Marvin
Marvin

Level 3 Expert

81400 Answers

Brad Brown

Level 3 Expert

17446 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...