Question about Zanussi TLE1116W Top Load Washer

1 Answer

The water inlet pipe of my machine is missing so can I manually fill up the machine with water?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,489 Answers

Yes.

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ultima1000, wm 71 says error 10 sometimes and error 11 mid way thru a cycle. The pipes are fine and water is on what could be the problem?


E10 No cold fill detected - washing machine does not fill
  • Check mains water pressure
  • Check inlet hoses for kinks
  • Check inlet filter
  • Check water inlet valve
  • Pressure switch fault
  • Wiring fault
E11 Not hot fill detected - washing machine does not fill
  • Check mains water pressure
  • Check inlet hoses for kinks
  • Check inlet filter
  • Check water inlet valve
  • Pressure switch fault
  • Wiring fault

Apr 11, 2016 | Washing Machines

2 Answers

I have daewoo dwf 200 le and it not taking the water from the pipe outlet what to do to fix the problem


Assuming you have mains water running to the inlet tap and the tap i is open, the most likely cause is inlet hose connector filter is blocked or the inlet valve inside the washer is faulty.

Hopefully you are able to select the wash program and start the wash cycle. Otherwise the problem could not be in the water inlet or elsewhere.
Refer page 21 on this manual and also check the part number and location of the inlet valve.
http://www.daewoo.cl/sta/manuales-tecnicos/DWF-312W%20Manual%20Tecnico.pdf

Aug 17, 2014 | Daewoo Washing Machines

1 Answer

Whirpool awm5100 machine not getting rid of washine powder in despenser only filling water alittle then stopping cycle


The most likely fault is the water inlet valves are blocked or only partially opening , pull off the pipe coming from the inlet valves and put the machine into cycle the flow of water should be full of the pipe and at mains water pressure, if this is not the case replace the inlet valves. Thanks tk

Mar 10, 2014 | Whirlpool Washing Machines

1 Answer

Washing machine not filling


really sounds like the inlet servos arent working there and might need of replacement

May 06, 2017 | Washing Machines

1 Answer

I have an Electrolux ESI 6104x. Regularly just after starting the dishwasher as it starts to fill for the first time the water inlet cuts out. If you turn the water off at the mains disconnect the inlet...


Disconnect the fill pipe from the back of the machine and you should see a small mesh strainer in side the dishwashers inlet valve. Check that this is not dirty - to clean it pull out the strainer and rinse under the tap.

Dec 29, 2010 | Dishwashers

1 Answer

Lack of water


First close the main water tap. Then the following.
Check the water inlet hose at the washing machine entering point. You can turn the knob and remove the hose. You will find a strainer attached to the inlet pipe. pull it out and clean the strainer. Replace it the same way. Do not miss the rubber parts. Do not forget to open the tap.

Apr 15, 2010 | KitchenAid 24 in. KUDI01FLSS Stainless...

1 Answer

My GLTF2940ES Front Load fridgeadire wont fill or drain


make sure you have water going through your inlet pipes pull the machine out and check while pulling out check they are not getting kinked. if water is going through pipes once removed from machine you have a problem with your inlet valves its unusual for both to go unless your using cold fill only check for calcium build up where you connect your pipe to valve test while pulled out.good luck.

May 13, 2009 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Washer


Probably your inlet pipe is clogged, or not open sufficiently. Plug off the wall, turn off the inlet pipe, disconnect tube to check carefully if anything is blocking the fine screen on both sides of the pipe. Also check the machine screen where water comes to the machine. It is good to close the inlet valve after your washing is done.

Rate me pl.

Nov 29, 2007 | Fisher Paykel EcoSmart GWL15

1 Answer

Washing Machine fills slowly how to change inlet valve


switch off power remove top switch off water and remove hose. remove inside pipe from valve - usually held by just a spring clip remove electrical terminals valve is just held with a couple of screws usually - remove these and valve will come away. put back in same order

Jun 22, 2007 | Creda W100FW Front Load Washer

Not finding what you are looking for?
Zanussi TLE1116W Top Load Washer Logo

Related Topics:

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zanussi Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1467 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

shaun taylor

Level 3 Expert

1525 Answers

Are you a Zanussi Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...