Question about Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Spin cycle does not complete and there is a small water leakage and an error is shown DC

Maytag Neptune FAV6800AW Top Load Washer will not complete the spin cycle and displays a dc error. Serial # 17400926gp

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 335 Answers

Hello tmsn2tree,

See this post for the details on a DIY repair for clutch issues with this machine, post back if you have questions. Most DIY folks can do this it's just a tight work area and you will save yourself $350+ in parts and labor. Your machine is a series 17 first two digits of your S/N mine is a series 16 and did not use the upper oneway roller clutch bearing. If you DIY the repair I would like to know if your series 17 machine has the upper roller clutch bearing. Rich

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have Neptune FAV6800AWW top load, washes when it gets to the rinse cycle it stops with water in. If we remove the clothes and wait a while we can get it to complete. The code we are getting is DR which...


Are you sure the error code is DR? Could it be DC an unbalance error code. Google ""16022808.pdf"" to find. Is the washer banging around in Spin Cycle? If so this is a Clutch Pulley issue.

Google this ""Neptune TL Washer FAV6800AWW"" a forum where I help owners of the FAV6800A and FAV9800A machines.

DR is not a listed error code in the FAV6800A/FAV9800A Service Manual.

Aug 27, 2011 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Maytag neptune top load washer will not spin out with small loads, large loads are fine. I get the DC error at about 10 mins left in spin cycle. No amount of shifting load will solve problem


This is a Clutch issue could be a easy fix if the Tub Seal is not the root cause.

If you get no help at this forum Google This ""Neptune TL Washer FAV6800AWW""

5th post down you will find the SM and support for the "DC and UC" unbalance error codes. Good luck..............DH1200s

Aug 20, 2011 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

My Maytag Neptune FAV6800AW top load washer will not go into the spin cycle with clothes in it. It stops at 12 minutes and then we get a DC error code. When you take the clothes out, it finishes up the...


if it spins when you remove the wieght out of the tub i'd change the belt and if that's not the problem the tranny is bad but try the belt first,most likely that's what it will be,stop overloading the washer the part number for the belt is 25001054 and it's around 15 bucks

Oct 22, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Neptune FAV6800AW Top Load Washer: My Neptune washer is showing error code dc..Once i...


See this post Clutch Fix if you want to DIY I will help you.
Post back if you have questions……..Rich

May 18, 2010 | Maytag Neptune FAV6800AW Top Load Washer

2 Answers

Maytag Neptune FAV6800AW Top Load Washer? makes a


more than likely it just needs a little leveling...lift front of washer . there are 2 leveling feet on each front corner under the washer.. they turn like a screw ..just adjust these feet till its level and you should be ok....shake the washer by hand . if it doesnt move it shoud be level,,,,an unlevel washer makes terrible noises ...as you know..thanks and have a great day

Jan 03, 2010 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Error code of "dc" on my TL Maytag Neptune


If your machine is FAV6800AW or FAV9800AW the dc/UC errors are caused by a clutch malfunction. Your machine is shutting down with those errors so your Tub Displacement Sensor is working as designed.

Fix the Clutch malfunction and you can wash a single sock or a load of blue jeans and you will not take the dc or UC unbalance errors. See this post for the fix.

Post back if you have questions or need help.


Rich


Oct 06, 2009 | Maytag Neptune FAV6800AW Top Load Washer

1 Answer

Won't complete spin cycle, code dc


If your machine is a FAV6800AW or FAV9800AW see this post for a DIY repair/replacement of the clutch in your machine. If this is not your machine model type disregard my post.

Aug 27, 2009 | Maytag Neptune FAV6800AW Top Load Washer

Not finding what you are looking for?
Maytag Neptune FAV6800AW Top Load Washer Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Washing Machines Experts

Bill Long

Level 3 Expert

587 Answers

John Tripp
John Tripp

Level 3 Expert

4654 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Are you a Maytag Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...