Question about Mitsubishi WS-55859 55" Rear Projection Television

1 Answer

TV won't work after storm

Hi. We had a storm last night and my tv/dvd player/dvr/audio all went out for a moment. When I tried to turn them on later, some of the components won't work, namely the TV and DVD player. I unplugged the surge protector for a while then plugged back and when I did the TV appeared to turn on. The green "on" light lit up but just for a few seconds and fades away. The DVD player is doing NOTHING. Any help would be great! Thanks!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Ok lets try this hit the power button on the DVD player some go into stand by mode and when power is interrupted you have to push the button manually also reset the surge protector next get a lamp that you know works and unplug the tv and plug the lamp into the socket where the TV was plugged into turn on the lamp, does it turn on? yes then something wrong with TV again may have been in stand by mode plug back in and try pushing the power switch on make sure the TV if it has a remote is on the right im put to get a picture say like a satellite or cable or DVD player. hope this helps.

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Onkyo tx-sr604 help


You said you tried hooking the HDMI up directly from the TV to each component, and that worked. How is it usually hooked up - through some kind of switch? I'm not completely understanding your setup here.

Aug 10, 2007 | Onkyo TX-SR604 Receiver

1 Answer

My LG LCD 32LD350 seemed to have been fried in a storm last night, stanby red light no longer lit and won't turn on, still see some green lighting inside televison, but it won't turn on, Is it


Is it repairable, well, this question can be answered only after opening the back cover and evaluating the damage. From you side, please connect the TV to a different power outlet where other similar devices are working and see. Then try changing the input device to something that sure works. If it does not work even then, this may need attention by a qualified service technician.

Jul 27, 2012 | LG 32LD350 32 in. LCD TV

1 Answer

Sharp Aquos 46" HDMI problem


I have a similar problem. The Sharp TV aquos appears to be shutting down my blue ray player and dvd recorder when connected via HDMI. They work fine and never close down when I connect them via the rca cables either single video connection or a composite 3 cable rca lead. I have 3 HDMI inputs on the tv and the problem occurs on all 3. Any suggestions?

Jun 16, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

Dvd plays only black and white


check the video input cables for any damage or broken part. check either ur tv or the player for any setting against NTSC, PAL or SECAM. Or try the tv with other player or try the player with other tv.

May 03, 2009 | Sony DAV-FC8 System

2 Answers

Power Issue?


unplug the satellite cables and restart the dvr. if the dvr powers up plug in the cables when u see searching for satellite.

Oct 11, 2008 | Directv HR10-250 DTV Receiver

1 Answer

Moxi DVR


You will probably want to get the audio module checked by a professional. It could be something as simply as a blown capacitor/resistor, but if you are not familiar with this, best get a professional to diagnose/repair the set.

Try this first:
Unplug the tv from the mains and remove all cables. Wait for about 10 mins. Now plug the TV back into the mains, while holding the power button ON. See if this resolves the issue.

I would also recommend investing in a surge protector/spike buster if have frequent storms in your area.

May 11, 2008 | Televison & Video

1 Answer

DVD movies do not play


A blue screen means the TV is not receiving a video signal. Check all connections, then try another player, cable, etc. Also, check DVD and TV AV settings.

Dec 10, 2007 | Pioneer VSX-D912 Receiver

1 Answer

No picture but sound works.....


  • adjust brightness setting when playing tv.
  • adjust screen control located on flyback transformer.
  • hope this will help.

Oct 23, 2007 | Sony KV-36FS16 36" TV

Not finding what you are looking for?
Mitsubishi WS-55859 55" Rear Projection Television Logo

235 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1212 Answers

The Knight
The Knight

Level 3 Expert

74383 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...