Question about Dynamode RADSLC4WG Wireless Router (r-adsl-c4wg)

1 Answer

Cant access router setup

I have a new Dynamode RADSL C4 W G1 router, i have been trying to st it up to work with AOL. When i connected it to my laptop, win xp tells me that it has limited connectivity. The default access 10.0.0.2 doesnt work. When doing an ipconfig on cmd, it doesnt give me a default gateway ip instead im given loads of letters and numbers. Please help. i have tried everything i know.

Posted by on

  • david_hodgon May 29, 2009

    The router/modem doesnt have a little reset hole. i have already looked for this previously



    IN CMD i recieve this information.



    Autoconfiguration IP Address : 169.254.14.112

    Subnet Mask : 255.255.0.0

    IP Address : fe80::21b:38ff:fe72:6a11%5

  • ksjon May 11, 2010

    can you tell me what IP adress your computer gets from the router?



    (from the ipconfig)

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 256 Answers

If you type in http://10.0.0.2 to the adress line on your web browser, you should see a login window for the router. I think it is the wrong address. I think you should first RESET the router. Look for a little hole about the size of a pencil point. Stick a paperclip in and hold it in for about 1 minute. This should reset the router to factory settings.
If you have the manual, it should tell you how to access its setup pages. This is a modem and router in one. You must have an ADSL phone connection to an ISP. You must have the ISP's information to connect to their network. This information is needed to set the modem part of the router to log onto the internet through the ISP. Best of luck.

Posted on May 29, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sonos wont work with Dynamode R-ADSL-C4-W-G1


You have your Sonos bridge hardwired into your Dynamode correct? Your bridge needs to be physically plugged into your router at all times, it creates the SonosNet network that your Sonos players operate on.

Dec 25, 2012 | Computers & Internet

1 Answer

My BR-6004 W-G1 dynamode is unsecure,how do I secure it?


You need to change the wireless security mode.

Have you got your manual still?

Nov 22, 2009 | Dynamode (R-ADSL-C4-W) Wireless Router

1 Answer

My laptop is connecting to Dynamode BR6004 W G 1 router but not to internet happened suddenly tried all on/offs any ideas


Are yo trying to connect to the wireless network on the laptop /
If it is then make sure that the laptop is connected to the network.
Click Here for more info on networking

Oct 08, 2009 | Dynamode (R-ADSL-C4-W) Wireless Router

1 Answer

MY WIRELESS NETWORK SHOWS AS UNSECURE, HOW DO I CHANGE


Actually you're not going to change it, but all you need to do is put a password on wireless router firmware "Restricted Access Area".

Open your Wireless Router Firmware at Internet Explorer (search engine)
example: http://192.168.x.x then ENTER
Put your GATEWAY ADDRESS.

login: admin / password: admin

Then Follow the Instructions in the firmware program.

Hope this will help you a lot.

Please rate me if i am helpful.
Thank you.

Yboyandrei

Aug 18, 2009 | Computers & Internet

1 Answer

My laptop finds wireless router but will not connect to internet


Hi there. You may need to connect to the wireless network manually. What is the operating system running on your computer? If XP, you may follow these. (This is also applicable in other operating system, it may just vary a little) Right click the monitor icon showing on the system tray near the clock. Point the mouse in the icon and it will display the name if it is wireless network connection or network connection. Right click the icon and look for view available wireless network. If it is not showing, look for network connection. Right click and select "open network connection". Right click wireless network connection and select "view available wireless network" . Look for the wireless network you're trying to access or have connection.Highlight and click connect. If encrypted, you need to supply the pass key or security key twice and hit connect. It should allow you now to go online wirelessly. Please remember these, you should be able to go online wired. Make sure that there are other wireless computer connected to the wireless network you're connecting with and can go online wirelessly.

Hope this help :)

May 16, 2009 | Dynamode (R-ADSL-C4-W) Wireless Router

1 Answer

I have a Dynamode 6004 W-G1 wireless router


To improve wireless signal from your wireless router you can try changing the wireless channel of it from the router setup page, set the wireless channel to the highest one so it will avoid interferences on your location........

Jan 15, 2009 | Dynamode (HT809STP) Networking Hub

2 Answers

Connecting my dynamode 6004 W G1 wireless router to modem


Cable modems and routers must be turned on in a specific way. First, unplug both the router and modem. Next, plug the ethernet cable from the modem, into the cable router, and unplug the cable from the modem to the computer. Next, turn on the modem, and wait for all of the lights to stay static (usually there's 4 lights, the main one we're interested in, is the status light). Next, plug in and turn on your router. You should now be able to access the router and configure it for your internet connection.

May 18, 2008 | Computers & Internet

1 Answer

Dynamode BR-6004 W G1


Try holding down the reset switch on the back with the router turned on for about 10 seconds or more.

the following info was found at http://www.help2go.com/component/option,com_forum/Itemid,32/page,viewtopic/p,126642/

i believe the default password/username for your router is:

username:guest
Password:guest

www.portforward.com wrote:
You should see a box prompting you for your username and password. Enter your username and password now. By default both the username and password are guest. Click the Ok button to log in to your router.


this info was taken from
http://www.portforward.com/english/routers/port_forward ing/Dynamode/BR6004W-G1/WinMX.htm

Mar 15, 2008 | Dynamode (HT809STP) Networking Hub

1 Answer

How do i get back to my pppoa connection set up?


enter the routers' ip in IE and go to setup wizard

Dec 10, 2007 | Dynamode (R-ADSL-C4-W) Wireless Router

Not finding what you are looking for?
Dynamode RADSLC4WG Wireless Router (r-adsl-c4wg) Logo

340 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynamode Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Dynamode Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...