Question about Konica Minolta bizhub 350 All-In-One Laser Printer

4 Answers

Put in newer fuser unit but machine still says to replace

Installed newer fuser unit from bizhub c350 into bizhub c351 butmachine still says to replace fuser unit. Newer unit is quite new maybe 5000 copies on it.

Posted by on

Ad

4 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 54 Answers

If you want to clear the fuser message you have to be sure you replaced the fuser web. Then go to 25 => counter clear(items 13)=> Clear fuser counter or 36=>counter clear(items 8)=>Clear fuser counter.

Posted on Jun 03, 2009

  • gksloane Jan 27, 2011

    The C350 fuser p/n is 4049-513. The C351/C450 fuser p/n is 4049-523. It may be an incompatible fuser... I don't know if the 513 and 523 are interchangeable.

  • Viji Raj Jul 31, 2012

    where is the fuser web

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Okay I've got a Konica Minolta bizhub C 552 I have replaced the fuser unit and it still says replace fuser unit how do I clear that from the control panel?

Posted on May 27, 2015

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Close all printer doors or clean using blower the fuser unit all parts like fixer film

Posted on Jun 17, 2013

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The fusers have an inline fuse soldered on the plug which resets an internal counter. if you pulled a fuser from another machine will still show up spent when putting it into another machine. you can buy these fuses and solder them on yourself. most on the fusers will last 2 to 3 cycles by doing this.

Posted on Oct 11, 2011

  • elijah siko May 16, 2013

    where is this plug where the inline fuse is soldered?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

C 3201 bizhub c351


did you reset the machine after installing the different fuser a different fuser does not reset the machine requires a manual reset procedure your old one might be ok just got to hot and shut down reset the machine.

Apr 01, 2014 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Error -2555


means TCR sensor problem.
make sure the toner is not empty.
try to pull it then shake it, and put it back.

Mar 17, 2013 | Konica Minolta Bizhub C350/c351/c450 Tn310...

3 Answers

Konica minolta bizhub c350 error codes c-0510


eror code c-0098 meaning ??????????????pls tell me the solution

Jul 31, 2012 | Konica Minolta Bizhub C350 Digital Copier,...

1 Answer

How to reset image unit for C350 bizhub?


well there is a chip on the image unit that image unit (all colors) you need special chip writer to reset. you may need to just buy a new unit or drop me a line i may be able to get one...

Oct 27, 2011 | Konica Minolta bizhub C351 All-In-One...

2 Answers

How do you clear error code on a bizhub C350. A piece of paper was fused on the fuser unit and we were able to get the paper off. Now we have no access because the panel is locked.


while powering up machine hold down utility/counter key until trouble reset appears on screen. select it and ok should apper under it. power down machine for atleast 10 sec and turn machine back on.

Jul 22, 2011 | Konica Minolta bizhub 350 All-In-One Laser...

1 Answer

Bizhub c350 :the flowing unit need to be replacd soon . fusing unit


Fuser units need to be replaced by a copier technician unless you are quite good at taking things apart.

Apr 23, 2011 | Konica Minolta bizhub 350 All-In-One Laser...

2 Answers

Bizhub c350 will not scan to hdd


Easiest way is to change to SMB scanning which will give you direct scanning to PC or server. Create a new address in the machines address tab in the browser add the (must be a fixed) ip address of the machine it is going to with the folder name, user name and password and it will work a treat.

Mar 30, 2009 | Konica Minolta bizhub C351 All-In-One...

3 Answers

Konica Minolta Bizhub c350 error code c-0510. What is it? How do I fix it?


C0510 Upper fusing roller abnormally low temp


replace the thermistor in the fuser

Sep 25, 2008 | Office Equipment & Supplies

1 Answer

Installing waste ctg #4049111


Hi,
If you go to this web page:
http://kmbs.konicaminolta.us/productsattachments/manuals/opsc350.pdf
You will find the operation manual for that machine.
The c350 is the same as the c351
Hope that helps...
Lbcoaster

Aug 01, 2008 | Konica Minolta bizhub C351 All-In-One...

Not finding what you are looking for?
Konica Minolta bizhub 350 All-In-One Laser Printer Logo

1,563 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6161 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

Ben
Ben

Level 2 Expert

108 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...