Hello, Today I noticed that the top sprayer arm was sitting on the bottom of the dish washer. AllI could find was the arm, a plactic center piece and a metal part that looks like a key with a slot in the middle. I tried to look for a parts listing and exploded diagram view of the parts but could not find anything on the Sears site where the dish washer was purchsed. I am thinking that there is some type od screw that may be missing.
Can you help? Thank you in advance.
Hi,
The scum, film and white
residue problems have started since the reduction of
phosphates in dishwasher detergents.
Here is a tip that
will help you to solve the problem of films, residue, and scum in
your dishwasher.
Dishwasher
Residue and Film on Dishes
heatman101
///
328 views
Usually answered in minutes!
The top sprayer also came off into the top wrack of our KUDR01TJ dishwasher, but there was a plastic 'thingy" like a bolt without threads laying in the bottom of the tub. We were able to reinsert the bolt type "thingy" through the sprayer and into the fixture on the top of the washer to hold the sprayer in place, and after spinning it by hand a few times it looks like it may stay put. We'll see if it stays during the next wash.
Gary Scrivner
[email protected]
Top Sprayer came off
How do I find a replacement and install it?
×