Question about Dynex DX-LCD32-09 LCD TV

1 Answer

Buffer board on panel

I have a dx-lcd-32-09 that needs a buffer board on panel. The part ID number is 14476. The Tv is only 6mo. old wondering if it is worth putting the money into it to repair.

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 1,077 Answers

All the flat panel TVs are somewhat made to last less then 2 years. That's why the warranty is only 1 year for most TVs. Every TV is going to need repair sooner or later. So don't get discourage by it.
If you are a do-it-yourself person, it's cheaper than replacing the TV.
Here's the best place to get replacement parts:

Posted on May 29, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Replaced the T-CON board on a dynex dx lcd32-09 no issue resolved

Check all ribbon connections, and LVDS (cable from main board to t-con) connections. I'm thinking you may have an issue with the LCD panel itself. If that is the case, it will not be worth repairing.

May 12, 2012 | Dynex DX-LCD32-09 LCD TV

1 Answer

Tv picture flashes.

This problems could either one the t-con board is bad or the tv LCD screen panel itself it is slowly dying,than the tv not worth repairing because the tv internal LCD screen panel itself tubes lamps it is shorting out internally.

Oct 24, 2011 | Dynex DX-LCD32-09 LCD TV

1 Answer

Someone dropped it and screen looks cracked when it comes on...wondered if it was worth repairing

No,not worth repairing and it is impossible to get the tv LCD screen panel as refurbish as part and buy it from the outside if u can find it at all 50/50 it is garbage LCD screen panel u are buying.Only the tvs Corporations themselves,the LCD screen panel are 100% good.But it is 90% importamt to the tv functions.They'll charges u the same as a new tv.Sorry tvs with broken LCD screen panel are worth as for PCB boards as salvages tvs for it electronic boards only now.

Aug 25, 2011 | Samsung 320MXn2 32 in LCD TV

1 Answer

When my dell w3000 tv is warmed up after turning on, the right third of the display starts to pixalate.(not sure if thats right word) happens with any of the different input sources and any of the various...

On the bottom of the tv there are two boards that buffer the vertical sections of the screen. You need to take the tv apart (if you're able) and look for burnt sections on the buffer board below the problem area. Once you replace this section of board you will have no problems. The problem is happening once the board heats up from normal use.

Hope this helps :)

Mar 07, 2011 | Dell W3000 30 in. HD-Ready LCD Television

1 Answer

Hello, My tv is about 5yrs old.We heard a loud

You need to replace Y main board & buffer, which will cost you around $600-700. Since the TV is five years it will be better to go with new, and it won't be worth enough to spend $700 for old TV.

Hope this helps.


Feb 13, 2011 | LG 42PX5D 42 in. Plasma HDTV

1 Answer

T.v.powers up, sound but no pic. t.v. is only 3 months old.

Tv have a dead long board call the LCD inverter board.This long LCD inverter board,help to get a backlight to the LCD screen panel,to produced a picture.Tv only 3 months old,take ur warrenty repair,call the Dynex corp. for warrenty repair.

Oct 16, 2010 | Dynex DX-L22-10A 22 in. LCD TV

3 Answers

52rv530u with vertical lines

Hi luke
To answer your question;
You`d be looking at a t-con problem.
Buffer/driver boards upper and lower are used in plasma tv`s
Hope this help Good luck

May 15, 2010 | Toshiba REGZA 52RV530U LCD TV

1 Answer

I have a 42'' samsung tv after one year some black lines started to appear from top to bottom. i gave it back to commit then a few months later it came back but theres only 2 thick lines on the left from...

If it is a plasma TV, may be the bad connections, you can try to reconnect the cables on the buffer E or F board. But some model of panels the buffer E or F board connect to the panel directly without connector, so solve the problem need to replace the panel.
If it is a LCD TV, the panel may need to replace.

May 05, 2010 | Televison & Video

1 Answer

Dynex DX-LCD32-09. tv was working fine, then out

This type of failure could be in the LCD controller board or the power supply might not be providing enough voltage to the main board and LCD controller.
Let me know if you require further assistance locating the boards or part numbers.

Sep 28, 2009 | Dynex DX-LCD32-09 LCD TV

2 Answers

Westinghouse lcd tv parts

can I have your LCD SCREEN? Mine is cracked and I sure could use a new one, or used if thats the case =)

Aug 20, 2008 | Westinghouse LTV-40w1 HDC 40.02 in. LCD...

Not finding what you are looking for?
Dynex DX-LCD32-09 LCD TV Logo

Related Topics:

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dynex Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75283 Answers

Cindy Wells

Level 3 Expert

5380 Answers

Jaime Hernandez

Level 3 Expert

2336 Answers

Are you a Dynex Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides