Question about Sony FD Trinitron WEGA KV-36HS500 36" TV

Open Question

Interference "wave" appears when my Blu Ray is connected via DCI to HDMI

I have my Blu Ray player connected to my Wega TV via DCI to HDMI cable and there is this vertical "wave" that appears on the screen, traveling across it from right to left at a rate of about once per second. I've tried replacing the cable and I've tried plugging the TV into a separate strip than the Blu Ray player. My enjoyment of the HD experience is being derailed by this anomaly. What can I do?

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: HDMI port does not work on the KV-30SH420

I dont have a TV with HMDI input but i do have a computer moniter. To change i have to press a button that changes from VGA to HDMI. My computer supports HDMI and when i tried it, it works. Try looking in your manual for a way to switch input methods.

Posted on Jan 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

We have purchased a Samsung 55" Smart TV. We have it set up and working with Foxtel connected via the supplied fittings. How do we connect the DVD player?


The usual way is to connect it via a HDMI cable, for which the TV should have 2 or 3 input ports. You then select this HDMI as input on the TV to see a DVD playing.

Get a "high speed" HDMI cable. Some will say there is no difference between any HDMI cables, but they did see fit to increase the bandwidth in these cables for Blu-Ray DVDs.
.

Dec 27, 2016 | Samsung Televison & Video

1 Answer

I have red,yellow& white come out my dvd and only white & red plug in on the back of my tv how do i make that work and which source and channel i put the tv on


Red and White are audio, yellow is video. On the back of the TV there should be a yellow jack if it takes external inputs. There are two ways to connect your Blu-ray Player to your amplifier. Via HDMI output: Connect the player's HDMI OUTPUT to the corresponding INPUT on your amplifier using an HDMI cable. If your amplifier has an HDMI OUTPUT, connect that to the HDMI INPUT on your TV using an HDMI cable. See if these links help.
Five Tips to Successfully Set Up Your Blu ray Player How to hook up your Sony Blu ray player to TV How to Connect TV to Blu Ray Player CONNECTING YOUR SMART BLU RAY PLAYER TO YOUR TV
Obviously if you gave better information you would get a better answer.

May 30, 2016 | Televison & Video

1 Answer

Picture tearing at bottom


Have you tried changing the output video settings of the Blueray player from NTSC to PAL or vice versa? Also check that Blueray has HDCP turned on or off, depending on your TV set.
What's the make and the model of the TV?

Jan 01, 2014 | GE Televison & Video

1 Answer

My sony wega 42" rear


it depends on the type of blue ray player you buy some only have hdmi output others have standard rca - yellow - red - white this is the one you need

Dec 29, 2010 | Sony Grand WEGA KDF-42WE655 42" Rear...

1 Answer

Got a Kenwood vr405 surround receiver, a Sanyo plasma TV, hd cable box and an insignia blu ray player. Both the cable box and the blu ray player are connected via hdmi to the TV and the TV is connected to...


If you would like to use high definition audio decoding, connect the HDMI from the blu ray player to the receiver. If that it not an option for you due to lack of equipment such as an additional HDMI cable to go from the receiver to the television for the video portion of the signal, then connect your optical cable again. After the optical cable is connected, make sure the Dolby Digital decoding is enabled on the receiver, and that the media you are playing also has a version of 5.1 surround sound. Then, enter the setup menu of the player (which I suspect this is actually where the problem might reside in your case) and make sure that Dolby Digital and DTS are not set to "downmix." Dolby Digital should be set to output Dolby Digital and so on and so forth...hope this helped.

Jan 14, 2010 | Kenwood VR-405 Receiver

1 Answer

Sharp Aquos 46" HDMI problem


I have a similar problem. The Sharp TV aquos appears to be shutting down my blue ray player and dvd recorder when connected via HDMI. They work fine and never close down when I connect them via the rca cables either single video connection or a composite 3 cable rca lead. I have 3 HDMI inputs on the tv and the problem occurs on all 3. Any suggestions?

Jun 16, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

42LG50 TV - Intermittant sound problems with blu-ray HDMI input


You say this doesn't happen on regular cable or when playing a regular DVD. Hmm. Is this Blu-Ray player connected by simplink? HDMI is a bi-directional format cable, so  there are cases in setups where your tv can send commands to your blu-ray player and vice versa. It could be a problem with your blu-ray player that it is sending for some odd reason a mute command to your tv. Or is processing a command that your TV interprets to be a mute command when playing blu-rays. Because if it was the TV itself chances are you'd see this when watching a normal DVD or on cable as well. Since you say you're not, it leads me to believe the issue lies with the blu-ray player itself. 

Feb 15, 2009 | LG 42LG50 42 in. LCD HDTV

1 Answer

Running my Blu Ray DVD thru the Bose Lifestyle 18


hi there,

1-connect the blu-ray to your tv via hdmi cable and this will run picture.

2-connect the blu-ray via digital optical cable to the optical input on the bose system. then using your bose menu, (system menu)set your auxillary sound output to digital optical.

when watching dvd thru bluray player select aux on the bose and you're away.

good luck

Jan 31, 2009 | Bose Lifestyle 18 System

2 Answers

How to connect BLU-RAY DVD player to Pioneer Plasma TV via HDMI


The best possible solution to your problem is :
Connect your blu ray player directly to the HDMI input of you Plasma and watch HD video....
and connect the 5.1/7.1 sound thru the optical or the coaxial link directly to your AVR 3805.
You will not loose anything on the Blu-Ray.
The sound is best processsed by the AVR3805, while the video, which is the real upgrade (BluRay) in terms of resolution of picture would be processed by your plasma.

Connect and Enjoy

Dec 16, 2008 | Denon AVR-3805 Receiver

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-36HS500 36" TV Logo

Related Topics:

90 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

73665 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...