After the scanning no picture and no audio

Hello, you will need to change the frequency chip which modulates the picture. Each country has its own video scan rate. Most of the countries use the same audio chip but not the picture/video scan chip. A technician should do it for you for a reasonable price. I hope I have helped.

Hi,

The complete Detail would be :-

Product MPN MPN DVD-1002
Key Features DVD Type DVD Player Number of Discs 1 Progressive Scan With Progressive Scan Playable Disk Types CD (Audio), CD-R, CD-RW, DVD Video, Picture CD Playable File Formats JPEG, MP3
Audio Surround Sound Dolby Digital (Digital out only)
Connections Outputs Composite x 1, S-Video x 1, Analog Audio x 1, Digital Audio Coaxial x 1
Convenience Remote Control Standard OSD Yes
Other Features Exterior Color Gray
Miscellaneous UPC 017999010026

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Don´t you put the progresive scan by mistake

put a disc in the player and once it starts to play press stop, then press and hold the stop button for 5 seconds this will turn off the progressive scan feature.

Any luck getting this fixed?Please let me know.Thank You very much!
Tyler

make sure you do not have a disc in the tray. Press the P.Scan button 2-3 times. You should get the picture back.

This can some times be caused by VBR audio encoded files as opposed to CBR audio some standalone DVD players will exhibit sound lag in this case. It is a good idea to re-encode the VBR to CBR audio this usually solved the problem.

Although this is usually with DivX (AVI) files that have been re-authored to DVD-Video I suggest that you convert all audio to CBR to avoid any such errors.

this conversion process it a bit of a long way around I know, but it does work!

1) Open video in VirtualDubMod or VirtualDubMP3 (if there is an index error this can sometimes fix it for you.

2) Ignore the error warning that the video contains vbr audio.
3) Extract audio as mp3 ("demux" in VdubMod or "save as wav", then rename to mp3 in VdubMP3).

4) Convert audio to wav with CDex

5) Open original video in VirtualDub, choose "direct stream copy" for video and "Wav audio" with "Full audio processing" with cbr mp3 compression (and interleaving with appropriate delay if out of sync) for audio.

You could also use several other methods including AVIDemux which uses VDub Mod or scan in the DVD-Video using TMPEnc v4.0 Xpress and applying a time lead OR lag however this doex not solve a progressive lag but can be used to reauthor a fixed error.

To change from p-scan back to i-scan with no video picture, mu1 model: 1.turn dvd on with no disc, wait 10 sec. 2.press "setup" 3.press "down arrow"(selects audio/video) 4.press "enter" (selects audio/video menu) 5.press "down arrow" 4 times (selects scan mode) 6.press "right arrow" (selects scan menu) 7.press "up arrow" (selects interlace mode) 8.press "enter" (should see picture) Or find a tv with p-scan capability.

To change from p-scan back to i-scan with no video picture, mu1 model: 1.turn dvd on with no disc, wait 10 sec. 2.press "setup" 3.press "down arrow"(selects audio/video) 4.press "enter" (selects audio/video menu) 5.press "down arrow" 4 times (selects scan mode) 6.press "right arrow" (selects scan menu) 7.press "up arrow" (selects interlace mode) 8.press "enter" (should see picture) Or find a tv with p-scan capability