Question about Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner

2 Answers

Ink isn't low but printing wrong colours, too much pink

New epson sx200- not replaced yellow yet but it says i don't need to yet, however colours made up of yellow come out pink although on nozzle check lines will print yellow

Posted by on

  • ksjon May 11, 2010

    Are you sure that the yellow you see on the screen REALLY is yellow? what i mean is that some programs f.ex. adobe photoshop can use its own set of colormanagementschemes.

    so basicly the color you see on the screen might be corrected to look yellow, but in fact it is purple.

    what you should try is to open paint (start -> run -> type "paint" -> ok) and use the bucket to fill the page with yellow. then print and see what happens.

    good luck.


×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 30 Answers

Fiend your solution direct from EPSON. Here is your solution...
ink isn't low but printing wrong colours, too much - 79d0c86.jpg
http://www.epson.com/printer/prob676ijt65/solution

takio-7

Posted on Sep 04, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Epson Master
  • 511 Answers

Is the colour you print is pure yellow (100% or mixed like deep yellow, mixed with little magenta). Is the yeloow nozzle is perfect.
Nozzle check in not always guarantee te print out is good. Cause, when the flow of ink is not good, after the ink spray form the head, the space inside head not fill by ink.

Posted on May 30, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BLACK INK NOT WORKING


Black ink head clogged/cartridge empty. Go to Printer Utility and do a Nozzle Check, Print a Pattern. If Black pattern lines are missing/broken then do another cleaning. Don't forget to try a new cartridge if the cleanings do not work. Refurbished Epson printers are great and can be purchased at www.epson.com/clearance. I have used them for 15 years.

Feb 15, 2013 | Epson 20 Ink For Stylus S20 Sx100 Sx200...

1 Answer

When I Print the color Yellow, it's being printed as Pink.


I think you switched the ink stations. Try to switch the yellow and magenta. It also is a possibility that they are refilled with the wrong ink color. Place new ink cartridges and your problem is solved! (It can be that a few prints still show some pink color, because there is a residu of magenta in the yellow printhead)

Jul 07, 2011 | Epson Stylus Photo R220 InkJet Printer

2 Answers

I have a new black ink cartridge but my printer wont print because the color ink is empty is there a way to get it to print without refilling the colored ink since i only need black???


When printing in BLACK, a small amount of the COLOUR ink also is used.
This "trick" prevents the COLOUR ink-jets from clogging, due to not being used.

So, you need to have a "good" COLOUR ink-cartridge.

Mar 18, 2011 | Epson Stylus Multifunction Inkjet Printer/...

1 Answer

My colour is coming out pink- when I see yellow and green on my screen it prints pink and blue


You need to replace ink, try to buy complete set of ink and replace it, if same problem in printing, try run self test print if default test page print in complete color, or else there’s problem with your print head.

Mar 23, 2010 | Epson AcuLaser C4000 Printer

1 Answer

Epson sx200 printer, wont print black ink only


Many printers especially Photo ones also use colour even when printing Black. so you do need to replace the spent colour cartridge.

If you only need to print in black get a B&W printer not a colour one.

Jan 01, 2010 | Epson Office Equipment & Supplies

1 Answer

The pink colour is missing every time i clean the


Probably one of the red cartridges is empty or near empty or possibly the yellow - it will miss whatever color is low or empty or substitute the next closest shade using the remaining colors if one is out.

Oct 02, 2009 | Epson Stylus Color 670 InkJet Printer

2 Answers

My epson stylus SX200 2C will not print black , i have replaced the ink 3 times and cleaned it - it has a lot of gaps and sometine doesn't print black at all. Colour is fine. Help please .


I have excatly the same problem. I have cleaned the nozzles mutiple times and replaced the blck cartridge twice but I still have patchy printing in the black portion of the test print and horizontal banding in word documents

Sep 20, 2009 | Epson Stylus Multifunction Inkjet Printer/...

3 Answers

Epson SX 205 ink insn't low but is not printing yellow or green


Status monitor just show approximately, not real level. It might be yellow and cyan ink is out actually.Others, yellow and cyan nozzle may be clog. Check nozzle, do head cleaning. Check nozzle again.

Jun 19, 2009 | Epson Stylus Multifunction Inkjet Printer/...

2 Answers

Epson sx200 One of the colour inks is empty and no print in black


Hi, this is not a solution because I don't think there is one apart from buying new inks. Epson and all other inkjet printers do this to prevent the coloured print head nozzles from getting blocked. If they are not used for a long time the ink dries up and blocks the nozzles. Epson recommends printing at least once a month with all colours to prevent this. Printing in black only option will only work if the colored inks are OK. Whenever the printer is turned on it performs a head clean, this is why the coloured inks get used over time even though they are not used for printing.

Apr 02, 2009 | Epson Stylus CX3200 All-In-One InkJet...

Not finding what you are looking for?
Epson Stylus Multifunction Inkjet Printer/ Copier/ Scanner Logo

932 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...