Question about GE JTP15 Electric Single Oven

1 Answer

Broiler element comes on when "bake" is pressed

On my GE model JTP15 single wall oven, when I press "bake," the broiler element comes on instead.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Does the bake element come on at all?
if so, try the oven out. do a bake @ 350 allow it to pre-heat, and see if once the pre-heat is comlete, id the broil shuts off.
on many ovens at the beginning of the cycle during pre-heat both bake and broil elements are powered.

other than that it may be a control board, or a burnt and crossed wire in the harness.

Posted on May 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a GE 24 inch wall oven model number JRS04B0W5BB that when bake is selected the broiler element comes on and then after awhile it looses temp and does not cook anything.


Ovens often use broiler element to preheat, then shut off when set temp is reached. Check fuses for and bake element itself.

Dec 01, 2014 | Ovens

1 Answer

Oven will not heat. Broiler comes on though.


Hi,

One of the ends of the element may have come out of the terminal that it slips into...push the element back into the socket...
Check out this tip that I wrote about this problem...

http://www.fixya.com/support/r4511800-oven_problems_electric_oven_heating

heatman101

Apr 25, 2010 | GE JTP15 Electric Single Oven

1 Answer

I have a GE oven that the oven part only doesnt come on, the top burners and broiler come on, is this something I can fix?


Most likely a bad bake element. Turn off the power to the range. Remove the oven racks. Remove the retaining screws holding the bake element to the rear wall. Carefully pull the element terminals out of the rear wall. CAREFUL now,the wires will be short. Remove the wires. If you have a volt ohm meter you can test the element for continuity. Set the meter for ohms or continuity and touch one meter lead each to the element terminals. If you get no reading replace the element with a new one. If you do get a reading your ERC clock is bad.

Nov 08, 2009 | GE JKS05 Electric Single Oven

2 Answers

Bake element stopped working on GE JTP15 oven


Mine did the same thing twice. There is a high temp safety switch on the back of the cabinet. Every time my wife runs the self clean cycle, the switch goes out. If you remove the oven from the wall, you'll see it. It should be normally closed if you check continuity.

Jun 04, 2009 | GE JTP15 Electric Single Oven

1 Answer

Ge wall oven will not heat up on bake,boil or clean cycle


GE JKP86BF3BB COMBO MICRO/ELECT OVEN

NO HEAT ON BROIL OR BAKE ELEMENTS

CKD WIRING FROM PANEL OK
CKD TERMINALS AT ELEMENT HAVE 120V ON EACH ELMT
FAN COMES ON
THE ON INDICATOR SHOWS WHEN TMP &START PUSHED
MICROWAVE WORKS FINE
I ORDERED A NEW BAKE ELEMENT TO TRY-NOT HERE YET
STUMPED

Mar 16, 2009 | GE JTP15 Electric Single Oven

1 Answer

GE Oven MODEL J KP27WOP2 WG - WILL NOT HOLD TEMP


You can re-calibrate the oven as follows;
press BAKE pad.
select temp of 500 degress or more.
immediately PRESS and HOLD the BAKE pad until "00" appears.
Then press the + or _ pad to adjust temp up or down 5 degrees at a time.
When fimished press the Clear/Off pad.

Mar 15, 2009 | GE JTP15 Electric Single Oven

1 Answer

Kenmore electrical oven


Trying to better define the problem....

Do you have any cuts, holes or "shorting" or tin-foil/aluminum around your bottom bake heat-element? If so, you may need to replace the baking Heat Element. (Ensure you do not use aluminum foil around your heat element to prevent your oven from getting dirty)

To replace your baking heat element, with power off; remove 2 screws securing the bake element. Slightly tug and pull towards you for about 3 inches or so and disconnect the connecting wires at each end. Then completely remove the heat element and install new in reverse manner. Whats' you're model number?



Jan 26, 2009 | Kenmore 40494 / 40495 / 40499 Electric...

Not finding what you are looking for?
GE JTP15 Electric Single Oven Logo

773 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Ovens Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a GE Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...