Question about NEC VT595 LCD Projector

2 Answers

NEC VT 595 wont turn on. Just red blinking light

I have a NEC VT 595 projector which wont turn on. It has a red blinking light. I changed the lamp but it has not changed the status.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had this same problem with 2 NEC VT595 projectors. My problem was that there was a broken "tab" on the lamp cover (the plastic cover that slides in place over the lamp) that is supposed to depress a switch which insures the lamp cover is in place before operating the projector. The tab was broken in half and not making the connection there for causing the blinking status light (.5 sec on, 2.5 sec off) indicating a lamp housing or cover error.

Posted on Aug 26, 2009

  • almaeder1801 Dec 03, 2011

    How do you fix it?

  • tfee Dec 03, 2011

    When you remove the lamp cover, if the tab is still attached, you can try gluing it. We tried this on a few, but it didn't hold for long. I ended up ordering a new lamp cover from NEC for about $4, but the shipping was about $10!

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Yes it was the problem of broken tab - which is holding micro switch of lamp was broken when removing the cover and it was disappeared in side of the projecter lete i found it
thank you NEC VT 595 wont turn on.  Just red blinking light - 77de49ca-1c9b-4d49-927e-7181744ff7f7.jpg

Posted on Jul 14, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The projector turns on but won't project any light through the lens.


If this is a NEC VT series projector, Change the lamp. When if it continues to blink amber and not project and image after installing a new lamp check the lamp cover to see if the micro switch tab on the lamp cover broke off. Some models have a built in lens cover. If the cover is not slid over to open completely the light may not turn on.

May 19, 2014 | NEC VT800 LCD Projector

1 Answer

Nec vt 595 lamp resat


press and hold help button for 10 sec..

May 09, 2014 | NEC VT595 LCD Projector

1 Answer

Wont light or turn on


1,whether the lamp is ok? -put this lamp to another projector to check it
2,whether the lamp ballast is ok ?

Have a good day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry Lampdeng Limited
Mobile: 0086-13178867858
Wechat ID: 008613178867858
Whatapp ID: 008613178867858
Skype: lampdeng@hotmail.com
http://www.lampdeng.com

Feb 26, 2014 | NEC Vt 695 Home Theater Projector 220 Lamp...

1 Answer

Does a lamp error message (6 blinking red status lights) mean the lamp needs to be replaced? or could something else be wrong.


According to NEC technical support, if the status light flashes red six times, this could indicate a defective lamp. If a new lamp is installed and the project still won't turn on, the projector will need service.

Jun 15, 2011 | NEC NP400 Projector

1 Answer

My NEC vt 595 was working fine last night and today i went to turn it on the status and power light started flashing red and orange and there is no picture


if Power is flashing orange - then it's cooling down

if Status is flashing red - then there are 4 flash combinations.
1 cycle (0.5sec On, 2.5sec Off) lamp cover or housing error
2 cycle (0.5sec On, 0.5sec Off) temperature error
4 cycle (0.5sec On, 0.5sec Off) fan(s) error
6 cycle (0.5sec On, 0.5sec Off) lamp error

Which is your condition?

Mar 18, 2011 | NEC VT595 LCD Projector

1 Answer

I have a NEC VT470 Projector. The power light is steady orange and the status light blinks red 6 times.


steady orange means projector in standby mode
red light 6 times is a lamp error.
either the lamp is old and wont start up or the ballast power pcb is not working.
can you hear the sparking of the high voltage trying to strike the lamp.
if you can then the lamp may be dodgy.
can you borrow one to test it out

Mar 02, 2011 | NEC VT470 Multimedia Projector

2 Answers

HELP! I changed the bulb already. My NEC VT 470 won't turn the bulb on. The green power light comes on, then the status light blinks green about 12 times, several rotations. Then the fan comes on, the...


Sounds like you lamp ballast has gone bad. I good way to verify this is, when you press power on the projector look inside the lens. If you see a small amount of light, then the ballast is good, and the lamp is bad. If there is no light then chances are the ballast is bad.

Apr 14, 2010 | NEC VT470 Multimedia Projector

1 Answer

Red light blinking in nec lt 260


how many times? that will tell you what's wrong:

1x- lamp cover (close lamp cover)
2x- temperature problem (too hot. clean out and cool down)
3x- power problem (check power)
4x- fan problem (one or more fans not running)
6x- lamp fails to light (lamp or ballast problem)

Sep 02, 2009 | NEC LT 260 Multimedia Projector

2 Answers

Lamp not lighting


Reset the lamp and try it.

Mar 28, 2008 | NEC VT660 Multimedia Projector

3 Answers

NEC VT 470 projector won't work at all


Try pressing the HELP button. Don't release and press the power button. The LED lights should blink. Release then try to power on again.

Jan 11, 2008 | NEC Replacment Lamp Projector Lamp for...

Not finding what you are looking for?
NEC VT595 LCD Projector Logo

5,313 people viewed this question

Ask a Question

Usually answered in minutes!

Top NEC Office Equipment & Supplies Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

The Knight
The Knight

Level 3 Expert

73680 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Are you a NEC Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...