Question about Office Equipment & Supplies

1 Answer

When printing on my Konica/Minolta Magicolor 7300, If I print photos or large areas of color there is a 1.5" strip of color that does not adhere to the paper when I print on 12x18 paper. The color rubs off and image repeats on the right edge of the paper. I am using Xerox color laser paper. It happens with all colors (CMYK). I am wondering if I need a new fuser unit. The machine only has about 3,500 prints, but as a graphic designer, most have been pretty color-heavy prints. Thank ou

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,126 Answers

Yes, it sounds like the upper fuser roller is missing an area of teflon. This would explain not fusing and repeating image in the 1 1/2" stripe.

Posted on Jun 06, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Blank streak down page when printing


clean the laser glass or replace the image unit for the color with the blank strip

Jan 05, 2014 | Konica Minolta Magicolor 1600W Printer

1 Answer

My printer only prints black


INK PROBLEM

Inkjet printers need to be used frequently to prevent ink drying out and blocking the print head nozzles.
If the print head cleaning maintenance routine does not clear the blockages, then print head needs replacing, but it may be expensive.
It may be more cost effective to buy a later model and better printer than replace the print head.

May 08, 2013 | Konica Minolta MAGICOLOR 7300EN LASERPR...

1 Answer

Konica Minolta Magicolor 2530DL streaks. maintenance


Lift drum out, look down behind toner and you will see a glass lens.
Clean it with a soft cloth or tissue. Works every time.

Aug 24, 2012 | Konica Minolta Magicolor 2530 DL Laser...

1 Answer

Color line along side of copies; doesn't always print; error message keeps blinking (no manual),


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

May 27, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Error light flashed when trying to print with Magicolor 2400W


Start the Konica Minolta Status application and check the error, you should get more info there.

Reset your Toners and Imaging units for Bizhub and CF series.
http://www.chipreset.eu

Jan 20, 2009 | Konica Minolta magicolor 2400 Laser...

1 Answer

Minolta magicolor 7300 message "print unit


Print head is passed its life which is the LASER get a new one.

Aug 05, 2008 | Minolta Office Equipment & Supplies

1 Answer

Konica Minolta magicolor 2430DL


Open the top cover. Remove the drum (part with long green handle). Below the drum you will see a strip of glass about 4-5 inches long. Take a cloth and wipe across the glass.

This will normally clear up any white lines in your print.

Jul 11, 2008 | Konica Minolta magicolor 2430 DL Laser...

1 Answer

Printing avery labels


You need to change the paper settings from plain to something thicker. The toner is not being heated properly for it to fuse to your paper. It needs to run at the correct speed and temperature in order to adhere properly.
Set it to a heavier stock.

Apr 29, 2008 | Konica Minolta magicolor 2430 DL Laser...

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

101 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

102366 Answers

jasbo
jasbo

Level 3 Expert

2237 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...