Question about Technics SA-AX720 Receiver
I have found my old reciever Technics SA AX720 with its matching cd player. The only problem I have now is that it don`t have an usb input... I put most of my music in ordinary memorystics theese days and just plug them in our (oh so cheap) stereo.. Is it any point still using my old reciever? I miss it, the sound was good and I sure have as lot of memories with it lol
Any idea what to do?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Technics SA-GX490 reciever
Disconnect receiver from power and open the unit. Localize fuse that is placed on small PCB between main transformer "big one" and rear panel.Fuse's amperage is 1.6 A .I'm quite confident that fuse is gone.If so, replace it with the one of same amperage and try unit.
My unit has done exactly the same to me with no reason.
Posted on Oct 04, 2008
I too have a Technics SA-GX100 and it's rated at 2 x 40W @ 8 Ohms. I have the Technics SB-2840 floor model speakers hooked to it, which are rated at 200W Music Input - 8 ohms. It sounds very nice just to be a 40W receiver.
Posted on Jun 12, 2009
SOURCE: Technics SA DA20
I have a Technics SA DA20 control receiver. I was given it by an electronics workshop and it has this same error of OVERLOAD coming into the display when switched on. I removed the plates from underneath and re-soldered as far as I could all the points along the stereo amplifier ICs and as far as access would allow. The unit then worked normally for several hours. I was very pleased, and went out shopping!. But on my return after it had been off for about an hour, the same problem has come back. But my boss at the electornics workshop thinks it it just a dry joint, or series of dry joints. The unit is complex to dismantle, so patience and care is required in taking it apart and making a note or diagram of how it comes to pieces and how to re-assemble it after the board has been re-soldered. It does not appear to be a component problem or fault with the SVI power amplifier ICs.
Posted on Jul 13, 2009
Tips for a great answer:
Jun 24, 2015 | Technics Audio Players & Recorders
Feb 04, 2011 | Technics SA-AX720 Receiver
Sep 04, 2010 | Technics SA-AX720 Receiver
Nov 19, 2009 | Technics SA-AX720 Receiver
Jun 07, 2009 | Technics SA-AX720 Receiver
Apr 06, 2009 | Technics SA-AX720 Receiver
May 21, 2007 | Technics SA-AX720 Receiver
339 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: