Question about Philips Magnavox 27MS343S 27" TV

1 Answer

Colour The universal remote will not ajust the convergance colours, is there any way I can do it manually

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 790 Answers
Re: colour

Because you have defective convergence correction circuit amplifier! the only thing you can do now is to replace the convergence IC.

Posted on Oct 22, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

I have a universal control and i don't have the codes for it to work the tv

    Remote Control Code List
    Jumbo Universal Remote Control · 8 Device ... Programing codes for the remote. If you do not see your device listed, you can use the code search feature to program the device into the remote. TV Codes ... JVC, 013,054,055,060,065,067,089.‎Guide to Programming the ... - ‎Download the Manual - ‎8 Device Learning Jumbo ...

    What is the universal control remote code for a JVC television? > Technology > Television & Video
    JVC universal codes can also be found on the instruction sheet or manual guide that comes with the remote control or television set. If these universal codes do ...

    JVC Remote Codes
    A list of TV, HDTV, DVD, Receiver, Audio, Amplifier and and VCR remote codes forJVC. images for codes for universal remote control jvc

Jan 03, 2016 | JVC AV-32D305 32" TV

1 Answer

Can any one tell me the Remote Model No for TOSHIBA Colour TV Model No: 2168TIV

If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one.
To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have.
Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site Check this site too. Universal remote controls are available at most of the electronic spare part selling shops.

Sep 10, 2014 | Toshiba Standard (CRT) Televisions

1 Answer

How can i adjust convergence with universal renote?

Cannot be done as needed buttons are only on original remote---The good news is almost any Mitsubishi remote made over several years will have those---EBAY?

Nov 08, 2012 | Mitsubishi VS-60607 TV

1 Answer

Can a hitachi convergence be fixed without a remote? seems like red is adjustable, but cannot access the blue line with our universal remote

Ur universal remote was able to move - + from the convergence grid wright,it is a good remote.The tv convergence board is dead.The tv convergence board the 2 STK convergence ICS and some or all of it resistors are dead too.These parts must be replaced on the tv convergence board to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Dec 19, 2010 | Hitachi 43FDX01B TV

1 Answer

Convergence issue; red 3D effect. In grid convergence mode blue will converge w/green fixed lines and red horizontal will but the verticle red will not adjust far enough left to converge. has ajustment...

Convergence is dead.Must know how to solders?Must replaced ICS and all of it resistors.Tries Tv repair, for a convergence kit.The shop will cost u $300 for parts and labors.

Jan 24, 2010 | Hitachi 43FDX01B TV

2 Answers

Concaved distorted picture in 1080 Mitsubishi 65" TV.

This is a convergence rpoblem that is either bad connections on the pins of the convergence ICs or defective ICs. If you can solder and are comfortable working inside TVs where there are potentially dangerous high voltages, let me know and I'll provide additional details and instructions for fixing this yourself.


Dec 11, 2008 | Mitsubishi WS-55807 TV

1 Answer

Convergence problem

Hi there!
You would need the manual to adjust the convergence. First to correct the curving and then to line up the colours. Not too sure wether you need a service remote or the one that came with the set. If no adjustment takes place when you adjust, replace the Convergence Amp IC'S. Good luck,JUS004

Feb 28, 2008 | Mitsubishi VS-55707 TV

1 Answer

Colours on TV Panasonic TX-32PL10 5/6 years old

Convergence amp ic bad
Or send to

Feb 11, 2008 | Standard (CRT) Televisions

1 Answer

Philips tv

you probably need a hotel master remote, i.e. the philips rc2573gr:

Oct 17, 2007 | Philips 36PT41B TV

Not finding what you are looking for?
Philips Magnavox 27MS343S 27" TV Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Standard (CRT) Televisions Experts

Sp Gupta

Level 3 Expert

655 Answers

Jim Evans

Level 2 Expert

186 Answers


Level 3 Expert

485 Answers

Are you a Philips Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides