Sd card got stucked in tray

Hi !

First, you have to make sure that you have installed the proper drivers for your mmc/sd port.

http://support.hp.com/us-en/product/HP-Media-Center-m7000-Desktop-PC-series/1847154/model/3185130/drivers

Restart after installing. After that, just insert the mmc into the slot and you should see it on "My Computer" or press Win+E.

Sounds like the drivers might be missing which is why there is no response.

Depending on which operating system your running on the laptop will determine what file you download.

Go to this page:

http://support.dell.com/support/downloads/driverslist.aspx?c=us&l=en&s=gen&ServiceTag=&SystemID=VOS_N_1500&os=WLH&osl=en&catid=&impid=

Choose your operating system, either XP or Vista and then under where it says chipset choose Ricoh Driver and download now. choose download by internet browser. Save it to the desktop if possible and then run the file so it installs.

If you go thru installing the drivrr and the card is still not being read by the laptop then the motherboard is bad.

Hi,
In the card slot if u are inserting a mmc card it will be inserted directly and after inserting u will find a new drive in my computer and on opening that u will be finding the data and to transfer the data directly right click on the data and send to drive name allottedto card reader.
If u rae using a micro SD card then u will have to use an adaptor which will convert micro sd card to the MMC size.

Hi,
First of all we will have to check the slot size.If the slot is for mmc then you will have to use an adaptor.MMC slot is big in size and sd to MMC converters are available.
Don,t try to insert the card forcefully it may damage the reader's pins.

The SD/MMC memory slot is already configured to read standard and HDSD cards. Just remove the DELL blank from the slot by pushing it in until it clicks and release it. Then pull it out. Insert the SD/MMC card into the slot and push it in until it clicks. The DELL Blank is shorter than an actual SD/MMC card, so don't try to push the SD/MMC card any further than the 'click'. Remove by pushing in until it clicks, release, remove.

Are you sure the card is being inserted properly? Does a light come on indicating the card is present? Check that the small switch on the side of the card is not in the locked position. Restarting the computer can fix it if the reader has been accidentally removed using the "safely remove hardware"option.

Your computer doesn't support compact flash cards. Your SD slot is a 5-in-1 card reader, supporting Secure Digital (SD), MultiMediaCard (MMC), Memory Stick® (MS), Memory Stick PRO? (MS PRO), xD-Picture Card? (xD). The big slot is for PCMCIA devices.

I'm not sure that this will be a once a for all answer, but the link below says that any device with an sd slot can handle mmc but devices with slots designed exclusively for MMC cannot handle SD. Since the axim has an SD slot, I would say that it is compatible with MMC although I haven't tried an MMC card and the manual doesn't specific mention MMC memory.

Problems inserting expansion cards, or keeping them in your device, may have a simple solution. Try these first: * Make sure the expansion card is facing the correct way. See the handbook for your device for illustrations. * Expansion cards do not fit into the slot if not oriented properly. If a MultiMediaCard (MMC) slides all the way through, it does not operate correctly. Make sure to fit cards carefully in the slot. * The mechanism of the expansion slot is called "push-push." Much like a glass cabinet door, you push to insert the card, and then push it in again to get the mechanism to release. Expansion cards do not need to be forced out of the expansion slot. * Though most expansion cards are notched at the top for removal with a fingernail or other such object, removing the card this away may damage the mechanism. Use an object only when a push fails to release the card. Please be aware that you could damage your handheld if you remove a card improperly, or insert objects other than expansion cards into the slot. * Expansion slots damaged by forced removal of the card do not release the card when pushed, and could refuse to ?lock? the card in the slot. Expansion slot damage can only be repaired by having the entire handheld serviced. * Some expansion cards labeled as SD or MMC do not actually conform to the SD or MMC specification.

The cause and solution may include one of the following: The card may not be certified SD or MMC. Purchase a certified SD or MMC memory card. The card may be corrupt. Reformat the memory card. CAUTION: Formatting deletes all pictures and videos, including those that are protected. Removing a card during formatting may damage the card. The card is not fully inserted in the camera. Turn off the camera, insert a card into the slot, then push to seat it.