Question about Logitech Driving Force GT Wheel for Playstation 2, PlayStation3

1 Answer

Brake pedal sticks!

The brake pedal on my driving force gt is sticking just on the surface so that the brakes are just barely on when I step off the pedal. I have to manually lift the pedal to stop braking...any solutions? The brake pedal sticks and I have to curve my toes to pull it back. I reckon that this is costing me at least a couple of seconds per lap

Posted by on


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert whose answer got voted for 20 times.


    An expert that has over 10 points.


    An expert whose answer got voted for 2 times.

  • Contributor
  • 15 Answers

Here is the solution for the sticky brake pedal. This is a common issue with the Driving Force series wheels

Posted on Sep 05, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What is the proper way to hold and use the Racing wheel for Gran Turismo 5?

you dont. its not really designed for gran turismo at all. i would recommend just sticking to the dualshock controller or if your seriously into racing fork over some money for the logitech driving force pro. it features force feedback, pedals, gear shifter and pedals for acceleration and braking. its pretty much as close to driving as you can get from a video game other logitech wheels are available with clutches six shifters and interchangeable wheels but the driving force is the best for its price alone.

Apr 28, 2014 | Intec G6076 PLAYSTATIONRMOVE ULTIMATE...

1 Answer

Gas pedal sticks on isuzu trooper

On the next "above freezing" day, force lubricant through the throttle cable and lube all linkage at the engine end and interior.AND BEFORE STARTING for the next while try depressing the gas pedal and make sure it is releasing fully.
If it ever gets stuck again SHUT IT OFF before you damage the engine with high RPM on a cold engine.

May 21, 2017 | 1998 Isuzu Trooper

2 Answers

I have a 1979 suzuki 550 motorcycle.When you step down on the rear brake pedal, the brake works but the pedal will not come back up to release the rear brake, I have replaced the spring that goes around...

Presuming your bike is disc brake on the rear, disconect the pedal from the piston which opperates the brake mastercylinder, by removing the clip and clevis pin, now when you press the pedal you should have no resistance at all, if the pedal still sticks then you will have to remove the pedal and knock out the shaft from the frame and clean the shaft and the hole in the frame before greasing and refitting, it may also be the piston sticking inside the mastercylinder

Aug 28, 2011 | 1979 Suzuki Gs 550 L

1 Answer

My "Brake" light came on

Thanks for choosing FixYa and welcome to the site. Your brake switch is probably stick. It has a little button on it that is activated when you hit the brake. It may need changed. It controls your brake light. It is right above your brake pedal. The brake pedal hits it when the pedal is pushed in. It is usually chrome looking and a round cylinder. Go ahead and change it. It should solve your issue. Thanks for using FixYa.

Apr 20, 2011 | 1997 Toyota Camry

1 Answer

Could you help with this problem? when i put my car in drive or reverse my brake lights stick and stay on the whole time.

on the top back side of brake pedal there is a brake light switch. it maybe just sticking or its out of adjustment. the brake pedal arm hits this switch everytime brakes are applied to activate the stop lights. have a good day !! if it just sticks you may be able to free it up.

Apr 07, 2011 | 2001 Ford Focus

4 Answers

Front brakes sticking after a couple of miles

There are 2 causes, 1.caliper slides are in need of servicing/lube.2, caliper(s) piston(s) need to be serviced/cleaned. Recommend replacement of both calipers, if either doesn't work.

May 15, 2010 | Cars & Trucks

3 Answers

2001 silverado 1500, just put on new pads rotors and 1 new caliper, the brakes are spungy, the wheel with the new caliper is sticking and the front passanger brake too, i cant figure out why.

Replace both front brake hoses.....they collapse on the inside and will not allow fluid to retract...caliper was probobly fine.....this happens a lot....good luck...Lee

Jul 22, 2009 | 2001 Chevrolet Silverado 1500

1 Answer

Brake lights stick while driving but turn off when pressing brake


Jul 05, 2009 | 2007 Pontiac G6 GT Convertible

1 Answer

Brake pedal sticks!

Here is the solution for the sticky brake pedal. This is a common problem on the Logitech Driving Force Series Wheels.

Jun 02, 2009 | Logitech Driving Force GT Wheel for...

Not finding what you are looking for?
Logitech Driving Force GT Wheel  for Playstation 2, PlayStation3 Logo

Related Topics:

1,064 people viewed this question

Ask a Question

Usually answered in minutes!

Top Logitech Video Game Consoles & Games Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Zhenya Ogorodnikov

Level 2 Expert

218 Answers

Lyle Siemens
Lyle Siemens

Level 2 Expert

328 Answers

Are you a Logitech Video Game Console and Game Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides