Question about Acer AL2671W 26 in. LCD Television

2 Answers

Sound but no picture

Set has sound but picture takes 30min. to appear

Posted by on

  • charleswynne May 28, 2009

    Set has sound, but picture takes 30min. to appear

  • charleswynne May 28, 2009

    Very helpful

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 326 Answers

Its the problem of inverter board in the tv.i will explain.in your lcd tv there is a board called inverter board which controls the backlight and picture in tv.as this inverter board is not got faulty but its weak at present.you can say it is at end of its life.because slowly --- slowly the picture will take more time then 30 minutes to appear and in the last stage when inverter board will go completely faulty at time no piocture will appear. to resolve this issue you will have to get your inverter board replaced The board costs $75 at shopjimmy.com and it is on-stock. Part no. is 10225010022. To replace it yourself, it depends on your skills. It a 37 inch and quite big. If not handle carefully you might end up with broken or scratched screen.
 
You might consider getting help from a person that has the skills to do it.
thanks.please do rate the solution.thank you for using fixya.keep updated

Posted on May 28, 2009

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 108 Answers

I think u should check ur dispaly rate or contact ur dealer he will solve ur problem

Posted on May 28, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Flatron L206 LCD comupter screen. Images have a gleem on them. pictures do not show properly.


Check the cable first, and set computer to a lower resolution to test the display.

Jun 01, 2008 | Computers & Internet

1 Answer

CS-40503 takes about 10 minutes for the picture to appear once the set is turned on (sound comes on immediately)....when the picture does appear, it's dim for approx. 5 seconds then comes up to full...


IF THIS SET HAS PIP (PICTURE IN PICTURE) THAN I'D SAY THE PIP MODULE IS GOING BAD. YOU CAN REPLACE IT OR GET THE BYPASS PLUG FOR IT. IT JUST PLUGS IN.

Dec 10, 2009 | Mitsubishi CS-40503 TV

1 Answer

Kitchenaid oven KEBC107KSS03 won't heat after cleaning cycle.


I have a kitchenaid oven # KEBC107KSS03. When I set the temp to 400 the buzzer goes off saying the temp has reached the desired temp, the temp is only 250 and will take another 20-30min to reach 400.

thanks for your reply

Aug 25, 2009 | KitchenAid KEBC107 Electric Single Oven

1 Answer

Samsung lns4095dx/xaa after 30min the screen goes


The first place to start is with the Main bd. The second cause would be the T-con bd. Have a trained Samsung tech troubleshoot to find out and repair the set.

Jul 05, 2009 | Samsung LN32A550 32 in. LCD TV

1 Answer

Not power not picture or sound


If its Dead Dead ,that mean no power is getting past the fuse :> then it needs a fuse
.30 vs 300.00-400.00

Ok there is a way of telling if its posibley
just a fuse . First no blinking lights ,good
no clicking sound from the set when you
try to turn it on .good

now unplug the set for about 30min
the plug it back in slowley if you
see and or hear sparks coming from
the plug , this is normal but bad news
for it being just a fuse , if you dont
see or hear a spark its likley just a
5-8 amp fuse blew inside the set. :>

Hope this was helpful

Jul 02, 2009 | RCA D52W20 52" Rear Projection HDTV-Ready...

2 Answers

All of the pictures taken are very fuzzy no matter what you do


check to see if a flower appears on the screen. If it does then the camera is set to macro and all your pictures except close up will be fuzzy. To switch macro off, move the ring on the front of the camera till the arrow is pointed straight down. I was having the same problem. Wasted a whole day of vacation pictures. That was what fixed my problem and I hope it fixes yours too,

Feb 17, 2009 | Samsung Digimax A503 Digital Camera

4 Answers

No picture but has sound


hello .this does sound like bad solder joints .all printed circuit boards do this after a while due to heating and cooling .is not advisable to try to repair yourself .possible electric shock and spiking .will do a lot of damage .take to a shop to have repaired

Oct 30, 2007 | Sony KV-36XBR450 36" TV

Not finding what you are looking for?
Acer AL2671W 26 in. LCD Television Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Televison & Video Experts

Gareth Cockram
Gareth Cockram

Level 3 Expert

661 Answers

Rommel Balcita

Level 3 Expert

749 Answers

Martin Murray

Level 3 Expert

1623 Answers

Are you an Acer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...