Need to know how to set up a surround sound system? It's fairly easy,
with the right equipment. Surround sound gives you that "theater" feel
in your own home.
For more information on optimizing the sound of
your chosen system visit:
To set up a
surround sound system go to:
Additionally,Some people prefers a wire diagram to connect their surround sound
system. The basic concept to connect any audio system is to follow the
path of sound from its origin to its final output stage, either
headphones or speakers. There are other basic premises to follow, such
as the impedance of the speakers and the output of the amplifier, but
the concept is to start with an input and terminate each input to an
output somewhere on the amplifier unit.
A wire diagram shows a picture
that represents where each of these wires would go in considerably
little detail. One example would be that a television set starts with a
signal from somewhere, broadcast or cable, and comes out of that antenna
and goes into the surround sound amplifier. The sound is processed in
some way and the video is output to the television set and the audio is
output to the speakers or headphones. Although complicated in textual
from, most find that a wire diagram is much easier to follow.
example of a wire diagram for a surround sound system visit ..
http://www.crutchfield.com/.Take care and please Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)
Hope this helps!