Question about RCA HD52W59 HDTV Projection Television

1 Answer

Rca hd52w59 3d screen colors are seroperated no convergence

Screen is 3d, colors are out of wack, screeen is bowed, and auto convergence is not in the menu. most likly fl231 fuse is blown. my question is has anyone fixed the problem by just replaceing the fuse and whats the best way to take the fuse out? is there anything I should do specifically ?can someone give step by step instructions please.

Posted by on

  • chandra66 May 11, 2010

    I changed the PC Board and now the color is showing yellow and gray. The picture is not formatting. Please help.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • RCA Master
  • 8,617 Answers

If you replace just the fl231 it will blow again. You will need to replace the FL231,DL231 and CP230. You can get the parts at the following link with free instructions with pictures total cost is about 12.00 shipping is free. the parts are all listed under the RCA parts category.
http://servicemanuals.vstore.ca/

Posted on May 28, 2009

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1030 Answers

SOURCE: rca hd52w59 3d screen colors are seroperated no convergence

i have found the reason for the fl231 fuse blowing is faulty solder connections on the flyback transformer is the main cause. I have came across only one bad signal board that cause this but this was very very rare 1 in 1000. This is a very specific fuse, .400 and it is recomended only to replace with exacte one. consult the fl231 problem in the tips and tricks section.

Posted on Jan 02, 2009

  • 1030 Answers

SOURCE: rca hd52w59 3d screen colors are seroperated no convergence

step by step instructions are avalable in the tips and tricks section of this website.

Posted on Jun 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Rca 52 inch that when I turned it on it was bowed at the top and the bottom, the images are double and the color is off.


sems like to me you have a convergences problem chedk conveg board and convergence chips and risistor or try replacing it. or try auto convergence. useally when when they are bowed at the top and bottom its the conver board..i hope this will help

May 28, 2012 | RCA Televison & Video

1 Answer

Screeen is bowed and i have a ghost or 3d effect on the screen. the tubes may need to be converged, but not sure how.


This RCA DLP tv model have auto convergence at it menu,lost it from the menu or can't get to converge,this tv have a convergence fuse mean the convergence fuse FL(231) near the FBT-flyback tranformer is dead.U have a soldering iron,a roll of desodering braid or a desoldering pump and a roll of solders,also can do basic soldering.Try website like Ebay.com to buy a convergence fuse(FL231) to do the replacement.

Feb 07, 2011 | RCA HD52W59 HDTV Projection Television

1 Answer

Turns on with sound but the picture is running colors mostly see red and blue also double vision. 3 colored lines show up on screeen when first turn on


do you have the convergence option in the customer setup menu? is the picture convcave bowed in at top and bottom. if you dont have the convergence option you might have the fl231 fuse problem. or something simular. first read this to determine if you do. if you dont you might have still have a convegence issue http://www.fixya.com/support/r1062030-fl231_problem_convergence_not_in let me know i am here to help.

Nov 07, 2010 | RCA HD52W66 Projection Television

1 Answer

Tv screen looks bowed out and the color is out of wack


Convegence Power supply problems are common for most GE/RCA projection Sets. Post more info - model # chassis # age - Did you try adjusting convergence?

Oct 24, 2009 | GE Televison & Video

1 Answer

I have rca 56wh78 56" with a bowed screen


You need to replace the FL231, DL231 and CP230 You can get the parts and instructions at the following link cost about 12.00 total. The parts are listed under the RCA parts category.
http://servicemanuals.vstore.ca/

May 30, 2009 | RCA P52937 52" Rear Projection Television

1 Answer

Rca hd52w59 3d screen colors are seroperated no convergence


step by step instructions are avalable in the tips and tricks section of this website.

May 29, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

Colors out of porportion, maybe a bulb went out


When you have a 3-d effect. this is called convergence. Is the picture disorted or bowed in. if the picture is bowed in then this is an indicaTION of complete loss of power to covergence curcit. I always check to see if you have the convergence option in the setup menu if you do not then i suggest reading the fl231 problem in the tips and tricks sectionl

Mar 15, 2009 | RCA HD52W58 52" TV

1 Answer

Rca hd52w59 3d screen colors are seroperated no convergence


i have found the reason for the fl231 fuse blowing is faulty solder connections on the flyback transformer is the main cause. I have came across only one bad signal board that cause this but this was very very rare 1 in 1000. This is a very specific fuse, .400 and it is recomended only to replace with exacte one. consult the fl231 problem in the tips and tricks section.

Jan 02, 2009 | RCA HD52W59 HDTV Projection Television

1 Answer

RCA D52W20 52" TV AUTO CONVERGENCE WON'T COMPLETE


Sounds like your convergence chip has gone bad. Usually costs about $300-$400 to fix. I would call a local TV repair shop and let them give you a free estimate.

Jan 29, 2008 | RCA D52W20 52" Rear Projection HDTV-Ready...

Not finding what you are looking for?
RCA HD52W59 HDTV Projection Television Logo

Related Topics:

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top RCA Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74383 Answers

matt martin
matt martin

Level 3 Expert

1212 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a RCA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...