Question about Hitachi 53UDX10B 53" Rear Projection Television

1 Answer

Convergence problem with Hitachi 53F300

I have a convergence problem with my Hitachi 53F300. I'm wondering if part# X480295 is compatible with my TV? If not, does anybody know the part number that would be compatible?

Thanks, Rick

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 110 Answers

Convergence Kit #x480306

Posted on May 28, 2009

  • TOM2-TOM2
    TOM2-TOM2 Jun 06, 2009

    # NOTE - If this info was helpful to anyone please click on yes!

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Hitachi has a blue and yellow swirl band at the top and bottom of screen


Tv have a problems known as a convergence problems,it dead.The tv colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?Yes.Than the tv convergence board is dead.The tv convergence board must be replace 2 STK convergence ICS and some or all of it resistors too.To fix the tv convergence board to solved the tv convergence picture problems.The shop,will cost u like $300-350 for parts and labors.

Mar 02, 2011 | Hitachi Televison & Video

1 Answer

Can a hitachi convergence be fixed without a remote? seems like red is adjustable, but cannot access the blue line with our universal remote


Ur universal remote was able to move - + from the convergence grid wright,it is a good remote.The tv convergence board is dead.The tv convergence board the 2 STK convergence ICS and some or all of it resistors are dead too.These parts must be replaced on the tv convergence board to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

Dec 19, 2010 | Hitachi 43FDX01B TV

3 Answers

Hitachi projection tv


Solution:
Your TV has a convergence problem. Here are some of the most common symptoms.

Screen looks 3D
One or more colors can't be adjusted when using the convergence menu.
Screen is bowed in but stationary.
Here is a quick test....
Using your original remote go-to the tv settings then goto the convergence or magic focus section
Try to adjust the red and then the blue convergence.
You should be able to move them up, down, left, and right.
If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.
You can get a repair kit that includes all the parts from www.TvRepairKits.com.
They have put together a kit for the Hitachi TV sets.
The kit includes a photo instruction guide, original Sanyo STK chips, convergence resistors, etc.
Everything you need to fix it yourself. Its a fairly easy fix on the Hitachi sets.

Dec 29, 2008 | Hitachi 61SDX01B 61" Rear Projection...

1 Answer

Chirping noise hitachi


if you have not replaced IC's replace them an you need to do convergence after good luck

Apr 30, 2008 | Televison & Video

2 Answers

Urgent help


ok i would suspect the yokes are shorted to ground somewhere. you can measure that. the dcu or the digital convergence unit... which is the processor that handles the convegence of the set. i would have to research and pull up schematics to know which output on the convergence chips that those resistors handle blue ver...blue horizontal..etc.. that might help to see which output is shorted.

Feb 09, 2008 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Re: 43FDX01B blue convergence issues


Ditto CTF1800's comment....Check RP-41 1.5 ohm 2 watt and
other low value resistors near IC's mounted on large heatsinks.

STK392-110 original convergence IC's can be upgraded to
Hitachi # CZ 01341 new number STK394-160E for greater reliability.......Hitachi also has an IC / resistor kit # X480295,
but I don't change good resistors, only the bad one(s).

Practice good visual acuity technique and ask questions!.....T.

Jan 02, 2008 | Hitachi 43FDX01B TV

1 Answer

Red double


Bad solder connects in convergence circuit...a solid fix is to
replace STK392-110 convergence IC's with upgrade STK394-160
Part # CZ 01341... you need two.....or buy kit # X480295 ( one )
Look for any damaged resistors near IC's.............T.

Dec 16, 2007 | Hitachi 53UDX10B 53" Rear Projection...

3 Answers

Blue shadow or ghosting on screen


  1. First try Magic Focus
  2. if this will not fix problem
  3. then you have a convergence problem
  4. You will need the Converg. Kit
  5. X480295 part number

Nov 12, 2007 | Hitachi 53UDX10B 53" Rear Projection...

5 Answers

Convergence problem


That unit has a convergence repair kit that should fix most problems. Order it directly from Hitachi p/n# X480295. It contains: Rk42 3.3 Ohm 1w Rk46 1.8 Ohm 1w Rk50 3.3 Ohm 1w Rk54 1.8 Ohm 1w Rk58 3.9 Ohm 1w Rk62 2.2 Ohm 1w Ik04 Stk392-150 Ik05 Stk392-150 And I would strongly recommend testing all the resistors in that circuit for change in value. Are you using a good heat sink compound on the STK's when you installed them? That and ordering the japanese knock-offs for STK's are the two most common critical mistakes made. Originally that unit had two STK392-110's for conv. amps. Even Hitachi recommends subbing to a STK392-150 or 180 for greater reliability. You do realize that for the cost you have after two failed attempts you probably could have taken this to a reputable shop and watching the ball games now. :) (no disrespect intended) Good Luck! Bill

Jun 01, 2007 | Hitachi 53UDX10B 53" Rear Projection...

Not finding what you are looking for?
Hitachi 53UDX10B 53" Rear Projection Television Logo

Related Topics:

231 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2318 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

matt martin
matt martin

Level 3 Expert

1210 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...