Bluray requires update firmware

Most bluray players have 2 eyes....one for dvds and cds and one for blurays. If cleaning by hand dont work reader could have gone bad.

If it plays CDs and DVDs but not BluRays at all, then the blue laser is burned out. CDs and DVDs use a different laser. A needed firmware update would not prevent it from reading a BluRay.

When is the last time you did a firmware update?

Will your machine play standard movie DVD discs? if it does then the laser pickup assembly is the problem. The blue ray discs require a higher precision tracking to offer better resolution.

Make sure you have a USB memory stick installed in the back of your player, around 1GB is large enough. It fixed some of my playback issues.

Some new Blu rays require a rom update. Try going to the drives manufacturers web site and get a rom/bios flash to update the drive. Blu rays are updated that way when new Blu rays come out such as AVATAR. Lots of info about that on the web.

I have the same problem but I did download the updates for both my Sony and Sharp Blu Rays and Avatar played wonderfully but unfortunately a few days later both players stop playing all Blu Rays. Has anyone had the same problem?

Well , did you try download the latest PS3 firmware from sony official site? If you don´t try to update your Ps3 Firmware...You should try to test another blu-ray games...Good Luck...

your player may require firmware updates to play newer BD movies.
here is a link for firmware updates for your player.

http://www.pioneerelectronics.com/PUSA/Support/HomeEntertainment/Blu-rayDisc+DVD/EliteBlu-rayDiscPlayers/ci.BDP-94HD.Support?tab=B

YOU MUST GO TO samsung site and down load the new vison for your player