Question about Xerox WorkCentre XD100 All-In-One Laser Printer

1 Answer

I have Xerox XD100. Machine is very noise. The noise is coming from back of machine. Sand like motor is turning but something is stock (can not moveThis motor look like suppose to move)

I have Xerox XD100. Machine is very noise. The noise is coming from back of machine. Sand like motor is turning but something is stock (can not move). This motor look like suppose to move heater part.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,072 Answers

There is a small helix gear attached to the shaft of the main drive motor. It cracks or shreads on the inside. You will have to replace the main motor. Not real expensive or difficult to replace.

Posted on May 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have Xerox Phaser 7400 with an error 928 we changed the fuser 2 weeks ago now the error has come back


Error 928 refers to the fuser motor failing. Problem could be with fuser motor, motor drive board or engine board.
One other possible cause would be if you are sending too thick a card stock through the machine, this can cause drag on the fuser which the machine interprets as a motor failure.
Hope this helps.

Jan 05, 2011 | Xerox Phaser 7400/DXF Laser Printer

1 Answer

Xerox Workcentre XD100 not printing


You need to use a IEEE-1284 Compliant parallel cable for this machine. A "changer" will not work, sorry.

Jan 25, 2010 | Xerox WorkCentre XD100 All-In-One Laser...

2 Answers

XD100 Won't work with USB


check the usb port boot computer and printer..or parallel to usb or usb to parallell try it..

Sep 14, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

Xerox workcentre xd100 copier NO POWER


hi,check power cord if the power cord correctly connected the problem is power supply.

Apr 26, 2009 | Office Equipment & Supplies

2 Answers

Xerox XD100 does not work


When you saying No working , What Happens when you press the print Button can you manually get this copier to print out ?

Has it stop printing only ?

Feb 19, 2009 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

Xerox copier XD100


Does the machine sit there and run and run and run. The motor turns on and just chugs away or simply the ready light flashes? Let me know which symptom so I can send you some things to try.

Oct 22, 2008 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

XEROX WORKCENTER XD100 NOISE


Most likely the fuser gear is worn. The noise is prominant in the right side toward the back I am assuming.
You can replace the heat roll drive gear itself, but honestly I would recommend replacing the entire fuser assembly. It is probably very very tight and would wear another gear out quickly.
You want to get that replaced before the drive gear on the main motor assembly wears out. It would not rewuire replacing that entire main drive assembly, But it is a real difficult part to replace.
Go onto google and do a search for The Parts Drop. It will be the first item to come up. CLick it on and call and talk to Britt.
He will have what you need for a reasonable price.
if you go that route and need instructions to replace that part. let me know. Its not very difficult.

Jul 16, 2008 | Xerox WorkCentre XD100 All-In-One Laser...

1 Answer

Xerox xd100 copier


Sounds like 2 different things going on.
The slow warm up is normally the toner cartridge is almost out of ink but not reporting it. It is trying to set up but there is not enough ink to do so.
The jams, if the machine is making it into the machine but not exiting, then you most likely have a broken gear on the end of the heat roller in the fuser

Dec 07, 2007 | Xerox WorkCentre XD100 All-In-One Laser...

Not finding what you are looking for?
Xerox WorkCentre XD100 All-In-One Laser Printer Logo

Related Topics:

194 people viewed this question

Ask a Question

Usually answered in minutes!

Top Xerox Office Equipment & Supplies Experts

Xeroxrep

Level 1 Expert

33 Answers

Philip Hughes

Level 2 Expert

68 Answers

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

Are you a Xerox Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...