Question about Microsoft Windows XP Professional for PC

1 Answer

BSOD Random BSOD's so here's the debug.....Please help. IRQL_NOT_LESS_OR_EQUAL (a) An attempt was made to access a pageable (or completely invalid) address at an interrupt request level (IRQL) that is too high.  This is usually caused by drivers using improper addresses. If a kernel debugger is available get the stack backtrace. Arguments: Arg1: 00000000, memory referenced Arg2: 00000002, IRQL Arg3: 00000001, bitfield : bit 0 : value 0 = read operation, 1 = write operation bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status) Arg4: 8052105a, address which referenced memory Debugging Details: ------------------ WRITE_ADDRESS:  00000000  CURRENT_IRQL:  2 FAULTING_IP:  nt!MiRemovePageByColor+66 8052105a ff08            dec     dword ptr [eax] CUSTOMER_CRASH_COUNT:  2 DEFAULT_BUCKET_ID:  DRIVER_FAULT BUGCHECK_STR:  0xA PROCESS_NAME:  ashServ.exe TRAP_FRAME:  a907dc34 -- (.trap 0xffffffffa907dc34) ErrCode = 00000000 eax=02758000 ebx=89c2dd80 ecx=00001000 edx=fffff000 esi=0240c000 edi=02758000 eip=80613163 esp=a907dca8 ebp=a907dcb0 iopl=0         nv up ei ng nz na pe cy cs=0008  ss=0010  ds=0023  es=0023  fs=0030  gs=0000             efl=00010287 nt!ProbeForWrite+0x39: 80613163 8a06            mov     al,byte ptr [esi]          ds:0023:0240c000=?? Resetting default scope LAST_CONTROL_TRANSFER:  from 805213f2 to 8052105a STACK_TEXT:   a907dbac 805213f2 00000000 c0012060 00000012 nt!MiRemovePageByColor+0x66 a907dbc8 8051f203 0240c000 0240c000 a907dcb0 nt!MiRemoveZeroPage+0x8a a907dc1c 80542d8c 00000000 0240c000 00000000 nt!MmAccessFault+0xeb9 a907dc1c 80613163 00000000 0240c000 00000000 nt!KiTrap0E+0xd0 a907dcb0 8057a2a4 00f10020 018477d6 00000001 nt!ProbeForWrite+0x39 a907dd38 8053fe9c 000000cc 00000000 00000000 nt!NtReadFile+0x8a a907dd38 7c911444 000000cc 00000000 00000000 nt!KiFastCallEntry+0xfc WARNING: Frame IP not in any known module. Following frames may be wrong. 00d0d540 00000000 00000000 00000000 00000000 0x7c911444 STACK_COMMAND:  kb FOLLOWUP_IP:  nt!MiRemovePageByColor+66 8052105a ff08            dec     dword ptr [eax] SYMBOL_STACK_INDEX:  0 SYMBOL_NAME:  nt!MiRemovePageByColor+66 FOLLOWUP_NAME:  MachineOwner MODULE_NAME: nt DEBUG_FLR_IMAGE_TIMESTAMP:  40c8ec05 IMAGE_NAME:  memory_corruption FAILURE_BUCKET_ID:  0xA_nt!MiRemovePageByColor+66 BUCKET_ID:  0xA_nt!MiRemovePageByColor+66 Followup: MachineOwner ---------

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Microsoft Master
  • 1,996 Answers

Go here or here. Follow the instrucitons...

I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Driver Irql not less or equal


You have lost a driver for the program mfewpak.sys or the system driver that is part of this program try this link.

https://www.google.ca/url?sa=t&source=web&rct=j&url=http://www.solvusoft.com/en/files/bsod-blue-screen-error/sys/windows/mcafee-inc/mcafee-total-protection-2011/mfewfpk-sys/&ved=0ahUKEwiBgqPzi8DLAhWMuoMKHbcsC2sQFggdMAE&usg=AFQjCNFDrzTvr_H6PXB1ScO_YdgbbdJVqA&sig2=r1WFj1-LX6CmVymdP3Pbyg

Mar 13, 2016 | HP Pavilion Computers & Internet

1 Answer

How to fix error code


Try this microsoft support document:
http://support.microsoft.com/default.aspx?scid=kb;en-us;314063

Stop error 0x0000000A (Stop 0x0A) shows that there was an attempt in kernel mode to touch pageable memory at too high a process internal request level (IRQL). This error usually occurs when a driver uses an incorrect memory address. Other possible causes of this error are an incompatible device driver, a general hardware problem, and incompatible software.


Basically a software or hardware incompatibility.
It offers some solutions that you may want to try

Aug 23, 2014 | Computers & Internet

1 Answer

Machine check exception occurs at start up bsod 0x0000009c numbers in parentheses varies... on occasion it has an irql not less or equal error The machine is runnig xp pro amd dual core 4200+, 1 gig...


A driver is corrupted and loads abnormally - this can be either one of a device or from a program that deals directly with the kernel : an antivirus, a backup.
The best, fastest and easiest way to deal with this is to reinstall windows then load one driver and program at a time until the bsod comes back - upgrade or replace the faulty one

May 24, 2011 | Computers & Internet

1 Answer

(PTZ930AC) Graphic Tablet: I'm getting "driver irql not less or equal" error ...


Guest

If you are getting the "irql_not_less_or_equal" BSOD after the install of the drivers then if is possible that you did not get a clean install of the drivers and/or there is something wrong with the device. To let me better see what is going on I need the stop code. The link below will help you get that info from the BSOD.

http://www.fixya.com/support/r4443711-blue_screen_death_bsod_important_info

Note Window XP 64bit was a transition operating system to help manufactures to write 64bit drivers and software for the 64bit operating systems. However there is alot of products out there that eventhough they have Windows 7/Vista 64bit support they do not have XP 64bit support.

Issken
http://www.fixya.com/users/issken

May 18, 2010 | Wacom (PTZ930AC) Graphic Tablet

1 Answer

How to solve driver irql is not less or equal problem ? i am using windows vista home premium


createrworld

In regards to getting the "irql_not_less_or_equal" BSOD this can be related to several things. You could be having a driver problem or a hardware related problem. To know exactually what your problem is we need to look at the stop code you are getting as well. The link below will show you what number I need to see exactually where your problem is.

http://www.fixya.com/support/r4443711-blue_screen_death_bsod_important_info
Issken
http://www.fixya.com/users/issken

May 08, 2010 | Microsoft Windows Vista Home Premium with...

2 Answers

I have a Dimension E521 and i get a crash wit a stock vid card


uninstall your video driver then update your driver for your stock video card

Oct 04, 2009 | Dell Dimension E521 AMD Athlon 64 X2...

1 Answer

My dell E521 is now getting STOP errors after installin a video c


there is an IRQ conflict(internal adressing all the hardware parts)
you may want to set all the IRQ options in BIOS to auto and let the BIOS handle the IRQ adressing, disable the plug'n'play OS feature too so that the computer hardware manages the IRQs instead of windows. The blue screen is a sign that windows is causing problems, but done the way described this no longer will appear.

good luck

Sep 29, 2009 | Dell Dimension E521 AMD Athlon 64 X2...

1 Answer

Bsod on a ibm thinkpad t30 xp sp3


Normally this indicates some kind of resource conflict between device. Could be you just updated drivers for a device, or a new device was installed/used.
From the device manager you should be able to find out which devices have a resource conflict.
Other details on the driver irql not less or equal error might help you as well.

Jules

Mar 30, 2009 | IBM ThinkPad T30 2366 Notebook

1 Answer

IRQ nOT LESS OR EQUAL HEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEELP


irql not less or equal sounds like a graphics driver problem. All you needed to do was boot up in safe mode and remove the gfx driver and the OS would have rebooted with the default driver and then you could have reinstalled it

Oct 25, 2008 | Microsoft Xbox 360 Console

1 Answer

Bsod


Stop 0x000000D1 or DRIVER_IRQL_NOT_LESS_OR_EQUAL

The Stop 0xD1 messages indicates that the system attempted to access pageable memory using a kernel process IRQL that was too high. Drivers that have used improper addresses typically cause this error.

Possible Resolutions:

• Stop 0xD1 messages can occur after installing faulty drivers or system services. If a driver is listed by name, disable, remove, or roll back that driver to confirm that this resolves the error. If so, contact the manufacturer about a possible update. Using updated software is especially important for backup programs, multimedia applications, antivirus scanners, DVD playback, and CD mastering tools.

Jul 04, 2008 | Intel Computers & Internet

Not finding what you are looking for?
Microsoft Windows XP Professional for PC Logo

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Microsoft Computers & Internet Experts

micky dee

Level 3 Expert

2727 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18392 Answers

Are you a Microsoft Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...