Question about Hotpoint Ultima WF860 Front Load Washer

3 Answers

Wf860 fills with water after about 40 secs,F18 comes up and the machine emptys,leaving f18 flashing any ideas

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 2 Answers

I had a Hotpoint WT960 that wouldn't spin, it just sat there running the drain pump and reporting fault code F-18 after several minutes. Fault code F-18 on this and similar Hotpoint and Indesit machines means "comms error". I got an exchange power control board from emwelec.co.uk and that fixed it.

Posted on Sep 16, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

With my wt965a hotpoint ultima lcd fault code f 18 it was a reverse polarity on the main electric board of the house which means live & neutral are the wrong way round good luk dekka2

Posted on May 20, 2008

Ad
  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 64 Answers

May be the pressure switch, or the rubber tube up to the pressure switch blocked

Posted on Oct 21, 2007

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

F18 ERROR ON WASHING MACHINE


have you CHECKED the filter is clean



leave feed back

Jan 09, 2014 | Washing Machines

1 Answer

F18 error code on Bosch Exxcel washer/dryer, and water pouring out the bottom - any ideas on how to fix? Filter is clean.


Sump hose has fallen off Unplug tilt machine back have a look underside to check also could be the soap dispenser hose Hole in it.This rubs away on side of machine 5yrs old.

Sep 13, 2017 | Bosch Logixx WFT 2806 Front Load...

1 Answer

F18 error code on Bosch Exxcel washer/dryer, and water pouring out the bottom - any ideas on how to fix? Filter is clean.


This might help you with the pump its on a bosch Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.

Mar 04, 2013 | Bosch Logixx WFT 2806 Front Load...

1 Answer

I was washing today and at the end of every wash tere was a code of f18 flashing on my screen .what should i do


F18 means pump is blocked or broken, clean filter first, no result change then you have to change the pump.

I also had this problem - the machine was full of water and it flashed up F18. I had to drain the water out of the machine using the small pipe located next to the drain filter. There was loads of water to drain out. I used my oven roasting tray which was perfect for the job. Then I undid the screwcap filter. There was a lot of really black water that came out, along with about two pounds worth of coins.

Jan 06, 2011 | Bosch Exxcel WFX 2467 Front Load Washer

1 Answer

What do I do when My machine shows F18 as an indicator of a problem


Hi,

F18 means pump is blocked or broken, clean filter first, no result change then you have to change the pump.

I also had this problem - the machine was full of water and it flashed up F18. I had to drain the water out of the machine using the small pipe located next to the drain filter. There was loads of water to drain out. I used my oven roasting tray which was perfect for the job. Then I undid the screwcap filter. There was a lot of really black water that came out, along with about two pounds worth of coins and some hairgrips. Now my machine works perfectly !

thank u
rate me

Aug 23, 2009 | Bosch Washing Machines

1 Answer

Wt960 with an F-18 what is it and how can i fix it


Hi,

F18 means pump is blocked or broken, clean filter first, no result change then you have to change the pump.

I also had this problem - the machine was full of water and it flashed up F18. I had to drain the water out of the machine using the small pipe located next to the drain filter. There was loads of water to drain out. I used my oven roasting tray which was perfect for the job. Then I undid the screwcap filter. There was a lot of really black water that came out, along with about two pounds worth of coins and some hairgrips. Now my machine works perfectly !

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Jul 12, 2009 | Hotpoint Ultima WF860 Front Load Washer

3 Answers

Bosh Washing Machine F18 fault


I also had this problem - the machine was full of water and it flashed up F18. I had to drain the water out of the machine using the small pipe located next to the drain filter. There was loads of water to drain out. I used my oven roasting tray which was perfect for the job. Then I undid the screwcap filter. There was a lot of really black water that came out, along with about two pounds worth of coins and some hairgrips. Now my machine works perfectly !

Sep 01, 2008 | Bosch Logixx WFT 2806 Front Load...

9 Answers

Why is the fault F18 error code on my bosch washing machine flashing?


Open the small flap at the front bottom right of the machine. DONT unscrew the circular white knob yet!!! Use the small black hose to drain the machine into a tray, by removing the small cap on the end of the hose. You will have to use a tray, rather than a bowl because the hose is only short, and keep emptying the tray.(put a washing up bowl next to the machine, so you don't have to carry the tray.) If water does not come out of the hose, then gently unblock it with a piece of wire or fine knitting needle. When water finally stops coming out of the hose, it is time to gently unscrew the white knob anti-clockwise, and pull it forwards. Now you can clear the debris out of the pump rotor, which is behind the white knob. Check with your finger that it can rotate freely, then replace the white knob firmly. Make sure the small cap is replaced on the end of the hose, clip it back into place and put back the cover panel. If this doesn't work then there is a blockage deeper in the machine, and dismantling will be required. Good Luck!!

Feb 03, 2008 | Bosch Logixx WFT 2806 Front Load...

Not finding what you are looking for?
Hotpoint Ultima WF860 Front Load Washer Logo

692 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

vince

Level 3 Expert

1216 Answers

Eric Taylor

Level 3 Expert

560 Answers

ptpumpman

Level 3 Expert

408 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...