Question about Whirlpool LSN1000LW Top Load Washer

1 Answer

Wont drain or spin

I have a whirlpool top load washer; at the beginning of the rise cycle it will stop (after it has fulled up with water). The machine makes no sound like it is working at all.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

Sounds like a broken lid switch
when you open your lid,
if it opens by the side and not the front there is an oval hole in the cabinet.
this is the lid switch, if it is not there its broken,
even if it is there, it could be broken, press in the hole with a pen. listen for a click.
the part is about 35$ and easy to change
if there are no children in the household it can be bypassed as well

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whirlpool Ultimate Care II Washer will not drain


bad lid switch,open the lid a few inches and close it down,if you do this a few times and don't hear a clicking sound the switch is bad.
http://www.youtube.com/watch?v=PZAbg9uftos

Jun 05, 2012 | Whirlpool Ultimate Care II LSQ9549L Top...

1 Answer

Washer stopped during spin cycle


Hello, try to checked the pump filter, and the pump is actually working. then I would suspect a draining problem.
If filter clean and pump works fine then it could be a control module fault. if this were the case, then it would probably be wiser to purchase a new washer.
Thanks

Jun 04, 2010 | Whirlpool LTE5243D Top Load Stacked...

1 Answer

Washer stopped while it was full of clothes and wont drain/spin


this is the problem with my machine what do you think i should do?

Nov 25, 2009 | Whirlpool LSR7333 Top Load Washer

1 Answer

Washer keeps filling w/ water, only stops when changed to spin


Your drain line is too low.
OR the drain line is restricting air where it enters the drain stand pipe.
Remove the drain line and hold it up high.
Turn the washer on to fill. It should fill then stop.
This example should explain what you must do to correct the drain line problem.

Mar 12, 2009 | Whirlpool Washing Machines

2 Answers

My Whirlpool washer won't agitate or spin . But it does drain the water.


i also had the same problem, and it ended up being the coupler. It was not hard to replace, it cost me about 19.00. I didn't follow full recomende instructions. I tipped the washer backwards. Removed the drain pump and the motor itself. Then I removed the old coupling and placed the new one. The washer is working like new...

Oct 18, 2008 | Whirlpool LSR5132PQ Top Load Washer

5 Answers

Whirlpool Cabrio WTW6600SW1: Won't drain


The washer drew half a tub of water on the "Bulky items" cycle, and stopped. All the lights on the cycle dial light up and flash, the machine beeps and the me error message in the "estimated time remaining" field is "Ld". I've tried to shut the machine down and change the cycle to "drain and spin" but it will not agitate, won't drain or spin.

Sep 05, 2008 | Whirlpool Cabrio WTW6600SBT Top Load...

1 Answer

Washer will not drain after wash cycle or the spin cycle


check to see if your pump is slightly plugged with a sock or ?

Your top loader should pump out in about a minute and a half when totally full of water.

Aug 11, 2008 | Whirlpool GSC9455 Top Load Washer

2 Answers

Kenmore Washine Machine does not drain


sounds like a bad lid switch, agitates but doenst advance to rinse, remains full of water?? if so lift the lid up and downa few times hear a "clicking" noise??machine doesnt think lid is closed so for safety reasnos wont spin/drain replace the door latch

Mar 10, 2008 | Washing Machines

Not finding what you are looking for?
Whirlpool LSN1000LW Top Load Washer Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Sal DeAngelo

Level 3 Expert

2122 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...