Question about Saeco Royal Professional Espresso Machine

2 Answers

Saeco Royal Professional capuccino maker brew unit assembly issue

I took out the dreg drawer and brew unit to clean it, following the manual's instructions to do so. To reassemble, it simply says "Assemble brew unit and slide in. In doing this do NOT pres position PRESS!"

Ok, I've done that, taken care not to press the PRESS button. But the brew unit doesn't seem to slide in all the way, and the front panel says "brew unit missing". Advice?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,618 Answers

Try this, check brew unit on it you will see a small arrow, this has to be pointing at the letter N, whisch is near the handle. Remove the drain tray and dreg tray, check the rails for the brew unit make sure there is no coffee on it, then slide unit in place.

Posted on May 27, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

I have the same model and what you have to do is trick the machine that the catching tray is installed and open the door and with a screw driver trick it like the door is closed. This will make the gear turn a few times and you will have to keep going little by little until the gear aligns with the brew unit. My brew unit is back in but no luck with the message going away. I am pretty upset.

Posted on Oct 26, 2012

  • ivyblackwell
    ivyblackwell Oct 10, 2013

    so how do we fix the brew back to zero...coz ive done it still not going.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Saeco Royal displays Dreg Drawer full after about 3-4 cups of coffee. i have cleaned the drawer. where do i find the Dreg drawer sensor to clean it.


hi,
this is normal as there is no switch or sensor. In fact the Royal as well as the Magic and others are counting the number of coffees that you have made between two removals of the dreg drawer. For this counter to reset, you have to remove the dreg drawer while the machine is ON, and remove it for about 10s minimum.
Retry and tell me if it is better.
Hope that helps,
M.

Mar 16, 2016 | Saeco Royal Digital Espresso & Coffee...

2 Answers

I have a Saeo Incanto Tondo S Class coffee maker. It grinds coffe bean but coffe is not coming out. There is no water in dregs but only grined coffe powder. I can get steam and hot water and I do not find...


Hello Saaddition,

I understand that your coffee maker is not producing coffee. However, it is operating normal in all other respects. This is usually a common problem when the machine needs to be descaled. You may also need to clean the brew unit. Here is the link to the manual for you Saeco Incanto Rondo C class coffee machine it give you all of the directions to clean and descale.

One other question did you remove the dregs drawer with the machine off. If you did you will need to do cleaning to reset the machine as removing the dregs drawer with the machine off will not allow it to brew coffee.

Thank you for choosing FixYa.com

Justin

May 08, 2011 | Saeco Incanto Rondo Fully Automatic Coffee...

2 Answers

I have a Saeco Odea Go and my puck in the dreg drawer are really wet and I have water leaking (brown so with coffee) under the dreg drawer. how I can fix it ?


I recently had this problem. I throughly cleaned and lubricated the brew group as directed by the manual. Apparently if the brew group doesn't move smoothly enough it won't grind the correct amount of beans. Try lubricating and then brewing 2-3 cups to have the machine recalibrate the grind amount.

Jan 12, 2011 | Saeco Odea Go

1 Answer

Saeco Odea: The brew group is jammed possibly due to incorrect insertion? Cannot insert dregs draw and cannot remove the brew group.


I had the same problem. I got around it by inserting just the grounds container (which sits inside the dregs drawer) and powering the machine on. Then the machine reset itself to the home position. It wouldn't do this with the dregs drawer removed, but putting in just the grounds container fooled it into thinking the dregs drawer was inserted. Hope this helps. JRP

Oct 24, 2010 | Saeco Odea Go

1 Answer

Machine won't work due to dreg drawer


Check to see if your machine has an "exit chute" or similar area where from the used pucks are ejected. The area might be clogged with used coffee grinds and causing a false reading from the machine.

Dec 14, 2009 | Saeco Royal Digital Plus Coffee...

1 Answer

Continually have message saying dreg drawer is missing but dreg drawer is in place


Remove drawer and clean coffee grounds behind it, there might be something keeping it from reaching the microswitch.

Sep 28, 2009 | Saeco Royal Professional Espresso Machine

2 Answers

Waret Pucks


Hi There are 2 problems that can cause a watery puck. 1. Like EsWorld said, If the grinds is too coarse it leaves room for more water and you get a watery puck. 2. But if your grind is like a grain of salt, the you don't have enough coffee going into the brew unit, and this leaves room for extra water. To fix this, there is a lever on the top center of the door. The lever will increase the dose if pushed towards the back. DON'T push the lever to the full back position. This could cause an over charge, which could cause the brew unit to dump the ground coffee with out making because it could not compress the charge, or it could break the brew drive. 1 click back from the full plus is fine and will give a great shot.

Jun 03, 2009 | Saeco Royal Professional Espresso Machine

1 Answer

Dreg drawer cannot be inserted back to its place...


Take the brew unit out, (press the leaver and swing it back together and put it back in the machine,

Apr 10, 2009 | Saeco Royal Professional Espresso Machine

1 Answer

SAECO Incanto Sirius Brew Group


When you remove brew unit look on the back you will notice a small latch near the top, make sure it is in the up position.

Feb 03, 2009 | Saeco 00034 Incanto Sirius Super Automatic...

1 Answer

Dregs Drawer filling up with water


Hi,

If this comes into the dregs drawer then you have to look at your brewing unit, if it comes to the drip tray, then it´s normal

Jul 05, 2008 | Saeco Magic Comfort Plus Espresso Machine

Not finding what you are looking for?
Saeco Royal Professional Espresso Machine Logo

657 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saeco Coffee Makers & Espresso Machines Experts

espressofixr

Level 1 Expert

16 Answers

83bj60

Level 1 Expert

22 Answers

Shehu Pro
Shehu Pro

Level 3 Expert

1284 Answers

Are you a Saeco Coffee Maker and Espresso Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...