Question about Audio Players & Recorders

1 Answer

Under settings accidently set to default & it took out all of my music. how can i get my music back, restore my music?

Under setting I hit scrolled down to default and I hit the wrong bottom and set my mp3 to the original settings which took all my music out. How can I get my music restored?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 68 Answers

If you have an Ipod, you are gonna need a lot of time. It will take long to sync each one seperately. If it's just an mp3 player, do this:
1.Open up your music folder and copy ALL your music. Do NOT delete it all.
2.Go to MY COMPUTER>then your mp3 device. Click paste. Your mp3 light might flash if you have one - this means it's sending it to your mp3.
3.You will get a box come up on the screen telling you it's copying the music.
4.There you go. Your music is on your mp3 again.

-sigh- if only ipods were so easy

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ps3 was owned by someone else and they put a block for mature games how do you get the block off


Unless you know the password they used you would need to completely re-initialize the unit as it was a new one, from the beginning, to wipe it out completely and set it back to factory defaults (sledge-hammer reset).

There is no way I know of to retrieve this lost password if you do not also know the owner's PSN information, which I'm sure you cannot get to. You might Google the question.

Feb 14, 2015 | Sony Playstation 3 (PS3) Console

1 Answer

My logitech z-5300 speakers were working perfect to play itunes & sounds from all programs. Got video camera & tried to use it but no sounds played around in control panel now my speakers wont...


Hi

You do not say which operating system you are using. My answer can therefore only be general rather than specific to your operating system.

The Video Camera you tried to install probably has an in-built microphone. Connecting this is may have changed the default settings for your audio devices.

You have a number of options for fixing this problem.

SYSTEM RESTORE
Start > All programs > Accessories > System Tools > System Restore > Restore my computer to an earlier time > selected a highlighted date in the calendar and an Event in the schedule before the date you tried to install the video camera > restore > restart the computer (you should hear the windows logon on tones if you are using a windows operating system) > (My) Music > Sample Music > double click on any track to test the sound playback.

AUDIO SETTINGS
Start > Control Panel > Audio devices > Audio (Playback Devices) > Set Defaults (set the Speakers to be the Default Playback devices > apply > ok > restatrt computer > (My) Music > Sample Music > double click on any track to test the sound playback.


AUDIO/SOUND DRIVERS
Reinstalling the Audio/Sound Drivers would also probably resolve the problem by restoring your Default Audio settings, if you have the Driver CD for your Laptop or Desktop Motherboard > install Audio/Sound Driver > restart computer > (My) Music > Sample Music > double click on any track to test the sound playback.

I cannot direct you to a driver download site, because you have given no information about your computer.

If this answer helps you, please take the time to rate it. This helps answerers better understand the needs and the point of view of the asker and helps us explore the best ways to provide useful, high quality answers.

If you need further help, please feel free to post another question or add a comment to this question.

Thanks for using FixYa.

Aug 31, 2011 | Logitech Z-5300 Computer Speakers

1 Answer

I forgot my four digit code to unlock my samsung sch u820


Steps to Restore Phone

This will return phone to the default settings and permanently erase all user data, including pictures,videos, music, messages, contacts and downloaded applications stored on the phone.


  1. From a Home screen, touch Menu ? Settings & Tools ? Phone Settings ? Security. Enter the lock code when prompted. The default lock code is the last four digits of your telephone number.
  2. Touch 5 or Restore Phone.
  3. At the prompt, touch Yes to reset and restore default settings, or No to return to the Security menu.


http://www.resetcellphone.com/how_to_reset_Samsung_sch-u820-reality

May 04, 2011 | Cell Phones

1 Answer

How to reset to factory settings


 The initialisation function erases all backup data in the instrument's flash memory and restores the initial default settings. To clear data backed up to the internal flash memory-panel user setting, registrationmemory-turn the power on by pressing the standby/on switch whileholding the highest white key on the keyboard. The backed up data will be erasedand the default values restored.Initialization does not delete the files transferred from the computer.
For further detail see pages 64 and 86 of user manual
Users manual available for download from here
http://download.yamaha.com/search/product/?category_id1=16277&&category_id2=16084&product_id=1056822

Feb 09, 2011 | Yamaha DGX640 Music Keyboard

1 Answer

I don't have my security key for my belkins router?


In order to rest your password or if you forgot it you need to reset the router.

  1. Locate the reset hole on the router. The button will be on the back or side of the router.
    See images below:

routerreset1.gifrouterreset2.gif


  1. Leave the router powered on.
  2. Use a paperclip (or similar) to press and hold in the reset button for 10 seconds.
  3. Remove the paperclip.
  4. Wait approximately one minute for the router to restart.

The settings for the router have now been reset back to their default.



---------->>>>>>> OR:



Restoring the router to default using the web interface

Symptoms

You need to restore the factory defaults using the web interface. This may be because the router is not performing as expected or you wish to remove all previously configured settings.

Setup steps:

  1. Connect the computer to one of the four LAN ports on the router.
  2. Open a web browser on the computer.
  3. In the address bar of the web browser, type http://192.168.2.1
  4. Click Login in the upper right-hand corner of the page. The router does not ship with a password, so just click Submit.

login.jpg

  1. Click on "Restore Factory Defaults" in the left-hand column under the Utilities heading.

    restoredefault.gif
  2. Click on the "Restore Defaults" button.

    restoredefault2.gif
  3. A warning box will open that says, "Warning all your settings will be lost, are you sure you want to do this?" Click OK.

    restorewarning.gif
  4. The router will begin the restoring process. Once the restore is complete, the router will reboot.

    Note: This may take several minutes.
Your router has successfully been restored to its factory settings.

Nov 07, 2010 | Computers & Internet

2 Answers

NOKIA 3110 MUSIC PLYER DOES NOT WORKS


Just simply format u r phone & restore default setting

Nov 09, 2009 | Nokia 3110 Cellular Phone

1 Answer

Hi, Can you tell me how to do a reset on my playstation 3 back to the default, or factory setting?


yea. this is easy. first on the XMB go under "settings", "system settings", then towards the bottom it will say "restore default settings".

it will tell you everything it will restore then walk you through the rest of the process.

this will not delete any videos, music, pictures, save data utility, game data utility or friends/trophies.

Aug 05, 2009 | Sony Playstation 3 (PS3) Console

3 Answers

Forgot password to acess< and or its still default setting. could you tell me what the wireless 700 routers default password is


Restore Factory Default Settings When you restore factory default settings to the base station, you clear your Internet connection settings and any special base station configurations that you have established. After the restore is complete, you will need to reconfigure your base station settings or restore these settings from a backup file. You should restore the original factory default settings only under the following circumstances: O You are experiencing serious problems with your base station, and resetting the base station does not fix the problem. O You cannot remember your base station password. In this situation, you must restore the factory default settings by using the Restore button on the base station, and then use the default password admin to log on to the Base Station Management Tool. To restore factory default settings 1. Open the Base Station Management Tool, and then click Management. 2. On the Management menu, click Back Up and Restore Settings. 3. Under Restore factory default settings, click Restore Factory Default Settings. While the original factory default settings are being restored to the base station, the Power light on the base station turns orange. When the light is solid green, the settings have been restored. If you want to open the Base Station Management Tool after the settings have been restored, type admin as the password on the Logon page. Do not attempt to log on to the base station until the settings are restored and the Power light on the base station is solid green. After you restore the factory default settings to the base station, you should navigate to each page of the Base Station Management Tool and reestablish the network settings you want, or restore the base station settings by using a backup file. For information about creating a backup file of your settings, see the following section. Be sure to establish your unique base station password as soon as possible after restoring the factory default settings to prevent unauthorized users from logging on. For more information, see “Change the Base Station Password.” please rate this answer, thanks

Jan 30, 2009 | Microsoft MN-700 Wireless Router

2 Answers

Won't read any discs


its a problem with the latest download update. sorry to say but its a job for sony as long as its still under warranty. just phone them up explain the probs your having and they will send you a new (normally reconditioned) unit out. sony's replacement service is very good.hope this helps

Jan 24, 2008 | Sony Playstation 3 (PS3) Console

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audio Players & Recorders Experts

kakima

Level 3 Expert

102366 Answers

 Grubhead
Grubhead

Level 3 Expert

5113 Answers

The Knight
The Knight

Level 3 Expert

74185 Answers

Are you an Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...