Question about eMachines W3611 PC Desktop

1 Answer

Motherboar reconected w3615 e machines motherboar reconected?

Posted by on

  • 2 more comments 
  • Samuel Jayakumar May 11, 2010

    what is the promblem please explain in detail

  • Jordan Hansen
    Jordan Hansen May 11, 2010

    Please explain your issue that your having in more detail so that I may assist you further.

  • i_m_possible May 11, 2010

    wat exactly is ur question??
    whether u wanna kno how to disconnect n reconnect a motherboard??


  • Craig_Evans May 11, 2010

    Hi,



    Can I ask you to make the question a bit more clear?



    Craig

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 32 Answers

Remove the hood, and double check that all of the cords and wires are correctly plugged in and secure. Hope this helps, Thanks

Posted on Jun 28, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Were can I download a compaq quiksilver2 cmd motherboared manual


would that not be from the motherboard manufacturer . all of the systems I put together had it in the box with motherboard .

Apr 22, 2015 | Compaq Computers & Internet

1 Answer

Can my motherboared take 2 tererbites and 8gb of ram with windows 7What's your problem?


No.... Your motherboard can only take up to a maximum of 4GB of RAM. It can handle a 2TB hard drive though.

Jun 26, 2012 | Dell Dimension 5100 (D51L1) PC Desktop

1 Answer

DaleharrisdI just need to know what is the maximum memory that i can install in a emachines w3615 desktop pc


Hi Dale - Your PC can support a maximum of two gigabytes of RAM, having two slots that can hold a one GB stick each.

Thanks for using Fix Ya.

Mikeywaf



Mar 25, 2011 | Computers & Internet

1 Answer

I have a emachines w3615 and it wont boot error message is pxe e61


I disable the lan boot w/no pxe support in the bios and put in a new hard drive 30 gig and it is great now.

I believe the hard drive went bad and it then tried to load an os from a previous network, which caused the PXE error. The true culprit was the bad hard drive.

Jan 31, 2011 | E-Machines emachines (emachinees) CD-ROM...

1 Answer

THE CHARGE IS GOOD, AND THE POWER TO THE CONECTOR AC JACK IN THE MOTHERBOAR TOO, WHAT YOU THING IS THE PROBLEM?


1.Remove ,the battery and adopter from your machine.
2.And then press the power button form 36 Second.
3.And then refix your battery and adopter to your machine.
4.boot your system
5.if you will get the same problem again means suspected issue with main board.

Nov 22, 2010 | Acer Aspire 5500 5570-4421 Laptop

2 Answers

USB port not working


if this external usb Motherboar have to buy another Motherboar ie if the mortherboar incluted

Oct 17, 2010 | Gigabyte GA-8I845GVM-RZ Motherboard

1 Answer

Whenever i start installing the machine automatically resarts


Try downloading a bit older drivers, not the newest one, Hope this helps

Jul 20, 2009 | Intel 845GE Motherboard

3 Answers

Replaced hdd on emachine w3615,light on mobo but it wont come on.


Hi ipackrat21, that little green led you see is telling you the motherboard has standby power. (Its supposed to be green & on).
Make sure the hdd jumper is set to, master without a slave). In a one hdd system.
When you replaced the hdd you also need to enter the bios menu.
In the bios you'll need to make some changes. First you should see the new hdd listed in the bios. (Normally it list the hdd by model). If your hdd is shown than go to the title "BOOT". You need to set the boot order. A normal boot order would list like so;
First boot device, Floppy disk drive".
Second boot device, "CR-ROM" drive.
Third boot device, "Your new hdd".
If your bios does not see your hdd you'll need to re-check the data cable from the board to the drive. (Make sure it is fully connected).
If the drive is an IDE/PATA make sure it has power. A 4-pin molex.

010e000.jpg Good luck ipackrat21!
Still have trouble, post it here.
Mike

Jan 14, 2009 | E-Machines EMA IMPERIAL GV (845GV) TG3...

1 Answer

Emachine desktop w3615


  1. START UR COMPUTER
  2. ENTER YOUR MOTHERBOARD SETUP
  3. SETS ALL VALUE TO DEFAULT
  4. SAVE IT
  5. THEN RESTART UR CPU

Jun 28, 2008 | E-Machines eMachines Desktop PC

1 Answer

Emachine w3615 keeps running


bug do a clean up run ccleaner and windows live one care free ok shut down the computer when u dont use it blow dust out inside well and get nice fans moving more the better

Jan 24, 2008 | Computers & Internet

Not finding what you are looking for?
eMachines W3611 PC Desktop Logo

Related Topics:

120 people viewed this question

Ask a Question

Usually answered in minutes!

Top eMachines Computers & Internet Experts

brian soufane

Level 3 Expert

693 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Michael Vincent Cruz

Level 3 Expert

868 Answers

Are you an eMachines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...