Question about Radio Shack Pro-84 Handheld Scanner

1 Answer

I just cannot reprogram this unit following the instruction manual..Help!

Hi, I bought a realistic scan pro 43 from ebay and I saved this page from the internet telling me how to program the unit http://www.repeater-builder.com/radio-shack/pro-43/pro-43-owners-manual.pdf But being to hasty I read the first part that tells you how to reset it ie press clear and 0 while switching on and lost all the pre programmed settings. I have followed the instructions after that point from the above mentioned "owners manual" on how to reprogram the damn thing and it just wont allow me to, what on earth am i doing wrong??? The instructions seem very straight forward. Could somebody baby walk me through this set up before I pull whats left of my hair out lol.... Thank you in advance, Ian (ozzythebeast2002@yahoo.co.uk)

Posted by on

  • ozzythebeast May 27, 2009

    Thank you for that info I will try to find some info on what you suggested, if anyone has an address for it i would appreciate that.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 27 Answers

Once you delete them i bielieve there gone radio shack does carry a book of frequiences you can program in depends on what you want listen to

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking for a manual for a Realistic Patrolman Pro 40 UHF/VHF Scanner. I don't even know what kind of power supply it needs.. LOL


Hi, that unit looks to be a mobile scanner and if I'm seeing right then you would need a Base power supply that could supply 12volt to it. Course you could also use a computer power supply and find the 12 volt line out on it. Here is the link to some spec's for it. Looks also to be crystal controlled so it cannot be reprogrammed. Good luck.

RadioPics Database RadioShack Realistic PRO 40

RadioShack Realistic Pro 40

Sep 06, 2015 | Radio Communications

2 Answers

I have a realistic pro-2023 lost manual and can`t reprogram it ,have u any ideas.....................baz


You can download and print the operating instructions for your scanner, at no cost, here:

http://support.radioshack.com/support_electronics/doc18/18513.htm

Bill B.
Listening in since the 60's

Jun 12, 2011 | Radio Shack Pro-2018 Scanner

1 Answer

I need a manual for a 2004 bosch dishwasher sgs43a92au/43


Here is the link to the Bosch product manual download page:

http://www.bosch-home.co.uk/download-product-manuals.html

Just use your mouse to click on the link, which is the underlined and highlighted text just above. This will open a new web browser page automatically for you and allow you to view the information and items at the website indicated.

Then just click on the following highlighted text on that page:
CLICK HERE TO DOWNLOAD PRODUCT INSTRUCTION MANUALS.

This should bring you to the Model Number Selection page, and just enter sgs43a92au/43.

On the following page just click on the english version of the manual.

After you click on that button, it will ask you if you want to open or save the file.
Choose SAVE.
Now Choose a location on your computer where you would like to save the file.
The easiest place is just right on your DESKTOP so it will be easy to find later.
Now click SAVE.

Once the download completes in about 5 seconds,
Click on the OPEN button.
You may need ADOBE READER installed on your computer to read PDF documents.
You can download this free at WWW.ADOBE.COM if necessary.
Click on the DOWNLOAD ADOBE READER button on right side of the ADOBE home page when you get there, the follow the onscreen instructions to install the software on your computer.

Thank you very much and good luck.

May 12, 2011 | Bosch Dishwashers

1 Answer

Bought a uniden dct1580-3a and need to find the owners manual.followed instructions to find it but could not. need to know how to record greeting.


Hi,

You can download and print the instruction manual in PDF format by clicking this link.

The detailed instructions to record greetings is given on page 43 of the manual.

You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixYa.

Sep 03, 2010 | Uniden DECT15803 Trio Cordless Phone

1 Answer

Have a pro 2020 realistic programmable scanner. got working bu after turning off, turning back on will not scan. just shows - - - - - - - - . on screen


The memory on the unit is not retaining the frequencies. Check for a small battery on the circuit board like a button battery you would find on your computer motherboard. Replace the battery and reprogram the unit.

Aug 21, 2010 | Radio Shack Pro-2052 Scanner

1 Answer

Manual for Realistic PRO-43


I couldn't locate the full manual for your scanner, but the link below will let you download/print detailed operating instructions:

http://support.radioshack.com/support_electronics/doc16/16688.htm

For a comprehensive database of active frequencies in your area, visit:

www.RadioReference.com

Bill B

Nov 15, 2009 | Radio Shack Radio Communications

1 Answer

Program factory remote keyless entry for 2003 Hyundai XG350


This bulletin supersedes TSB# 02-90-001.
DESCRIPTION: The security system keyless adapter cable (SPX/Kent-Moore P/N 09900-21300) is a special service tool (SST) that is used for programming new keyless entry remote transmitters to the factory security systems. The keyless adapter is used in conjunction with the Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03
or newer) and Data Link Connector (DLC) Cable. SERVICE INFORMATION: The keyless adapter cable can be used on the following vehicles:
  • 2001 - 2004 MY Elantra
  • 2001 - 2004 MY Santa Fe
  • 2002 - 2004 MY Sonata
  • 2001 - 2004 MY XG300/350 0390020a.gif
NOTE
  • The 2003 - 2004 MY Tiburon does not need the Keyless Adapter Cable to add keyless entry remotes to the factory security system. Instead, the Hi-Scan Pro connects to the vehicle using only the DLC cable. See page BE-60 in the 2004 MY Tiburon Shop Manual for the latest instructions.
  • The most current Keyless Adapter Cable Instructions are available in the following shop manuals:
SHOP MANUAL

PAGES

2004 MY Elantra
BE-73 - BE-74
2004 MY Santa Fe
BE-43 - BE-44
2004 MY Sonata
BE-40 - BE-41
2004 MY XG350
BE-46 - BE-47
KEYLESS ADAPTER CABLE INSTRUCTIONS:
  1. Connect the keyless adapter cable to the Hi-Scan Pro DLC cable. 0390020b.gif
  2. Plug the keyless adapter into the vehicle's 10-pin multi-purpose connector located behind the driver's side lower instrument panel (next to the DLC). NOTE Sample vehicle shown is the Santa Fe.
    0390020c.gif
  3. Turn the Hi-Scan Pro ON
    and press ENTER
    . NOTE "Release date 29. Sep. 2003" OR LATER
    must appear on this screen. To update your SOL card with the latest software go to www.hmaservice.com and refer to TSB 00-00-001.
    0390020d.gif
  4. Select option "HYUNDAI VEHICLE DIAGNOSIS"
    and press ENTER
    . 0390020e.gif
  5. Select vehicle model and press ENTER
    . 0390020f.gif
  6. Select option "TRANSMITTER CODE SAVING"
    and press ENTER
    . 0390020g.gif
  7. Ensure that the key has been removed from the ignition cylinder before proceeding. 0390020h.gif
  8. Follow the steps noted on the Hi-Scan Pro screen to program the remote(s). NOTE The factory security system can only be programmed to accept two remote transmitters and MUST be programmed for both remote transmitters at the same time.
    0390020i.gif
  9. Press ESC
    on the Hi-Scan Pro and verify that the remote(s) are functioning properly.
  10. Turn the Hi-Scan Pro OFF
    and disconnect the adapter cable from the multi-purpose connector.

May 22, 2009 | Hyundai Motor 2003 XG350

5 Answers

Realistic pro-54 scanning reciver


this unit requires crystals for each freq.

Oct 21, 2007 | Radio Communications

Not finding what you are looking for?
Radio Shack Pro-84 Handheld Scanner Logo

232 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Shack Radio Communications Experts

John
John

Level 2 Expert

509 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Jason

Level 2 Expert

211 Answers

Are you a Radio Shack Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...