Question about 3Com SuperStack II NETBuilder 222 Access (3C8222C) Router

1 Answer

Routing problem i am using two 3com router (1- 3Com SuperStack II NETBuilder 222 and 2- 3Com SuperStack II NETBuilder 227) . i want to link the route with ppp protocol joint the two different static ip network. in brief i set the net address at one router and at 2nd router and set remote addr at port !2 also. Both router communicate their own network but i ping from one router to 2nd router , give no reapply and error is "no local route found" what i do please help me i have no documentation . ahsan

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 256 Answers

The last part of the IP address has to be more than 10 apart. That is to say: if your first address is then your second should be or higher or or lower. I like to go for 50 higher or lower then you are well out of the range of your main router.

Posted on May 27, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I have a 3Com Router, Model 3030. What are the router commands used in that Router. I cannot use the following Commands: 1. sho version 2. sho interface 3. sho dsl int atm 0 4. sho ip route Are the...

The commands are different than a Cisco device. Rather than try to list all the commands in this solution I'm providing you a link to the products support page on the HP website (HP bought 3Com a while back). The support site has the manuals, command reference guides, etc for your device. It should be everything you need to get started. Best of luck!

May 05, 2011 | 3Com Computers & Internet

1 Answer

Hello i want config snmp in 3com 3300MM but i can not set it please help me thanks

There a great article at General Router Setup.
If you need more help post back!
Thumbs and testimonial are welcome!

There is a great article at Working with Windows Wireless Networks
If you need more help post back! Thumbs and testimonial are welcome!

Jan 23, 2011 | 3Com SuperStack II 3300 SM Networking...

1 Answer

Can i use 3com to sent message to my yahoo mail

No, the router is a device that routes data within a network. It is not designed a email client.
Your email client that is ( yahoo, gmail etc. ) if for sending and receiving emails. Your pc is designed with the Outlook and Outlook express and or Windows live to do this.

Jun 18, 2010 | 3Com OfficeConnect Wireless Router

1 Answer

Bought a replacement for a failed unit. Don't know how to enter the IP and other info to get the unit started. (3com 3c8201c)

If you donot have the default IP of the router, try setting an IP as on your machine & access (which is supposed to be the default IP of the router)

Aug 02, 2009 | 3Com SuperStack II NETBuilder 201 Router...

1 Answer

Need address for 3com office connect hub

Here is the link tothe Officeconnect Hub8 (PN 3C16700):

Thisdevice is unmanagable meaning you can not define addressing on hub nor can you configure routing on the hub.

Mar 18, 2009 | 3Com HUB OFFICECONNECT Ethernet 10MBPS TPO...

1 Answer

Doesn't POST

I've got a Superstack II 3300 24port switch, all leds are on, and led 8 blinks.
I'll let you know if I find a solution.

Dec 09, 2008 | 3Com SuperStack 3 3300 TM Networking...

3 Answers

Routing vlans on 3com switch 4500

i can't set ip address over 4 vlans. the 3com switch 4500 always give error message "there's not enough routing resources available".please help....

Oct 28, 2008 | 3Com 4500 24-Port Ethernet Switch

1 Answer

3Com SuperStack II 1100 - need new fans

All yo need to know is the physical size, the voltage and current.
They are usually on the little round label. Voltage is probably DC 12v, and the current should be something like 0.5 amp or 500mA, or 215mA or something similar.
Then just you will know which one you need.

Mar 07, 2008 | Computers & Internet

1 Answer

No no connect with 3com router so what to do

What do you mean by no connect? do you mean no sync DSL light flashing or not getting an IP Address, or not routing through the network? please explain.

Sep 02, 2007 | 3Com OfficeConnect Router

Not finding what you are looking for?
3Com SuperStack II NETBuilder 222 Access (3C8222C) Router Logo

Related Topics:

112 people viewed this question

Ask a Question

Usually answered in minutes!

Top 3Com Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

micky dee

Level 3 Expert

3003 Answers


Level 3 Expert

653 Answers

Are you a 3Com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides