Question about Televison & Video
The easiest way to hock up your VCR/DVD is by using a RF Modulator is a little box than you hook up to the regular antenna input of your TV and has tree RCA inputs for your video and sound.
just tourn your TV on chanel 3 and if your VCR is on then the you wiill see your VCR movie
when you tourn your VCR off then you see regular Cable/Satelite/Antena channels.
you can find them at Walmart and some times at dollar stores for under $15.
One nice ting is than you can hook more than one. One after the other and hook up more devices like your video game and don't need to press buttons just turn of the device than you are not using.
Good luck :-)
Posted on Jun 24, 2009
Hello sir, we have read your problem at fix ya!. you have specified that you want to connect the high definition set top box to your Panasonic tv. you should have been provided with coaxial cables as well as provided with many video output options like HDMI, RGB (D-SUB), Component (YPbPr), S-Video. but you havent specified the model of your Panasonic tv. coming to your problem, check the instruction manual(video output) of both the tv set as well as the set top box. the pins for the connection to set top box must be provided at the back side of your tv. you can find it easily and check which provided cable can be connected in the tv. in the back side of set top box the pins labelled video output will be provided. you connect the other end of cable to these pins. coming to the sony vcr you have specified that you have audio or video selector box, which can be used as an interface between the vcr and tv. hope your problem is tackled. thanks for using fixya!... if you are not satisfied this solution please write back to us. thank you.
Posted on May 27, 2009
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Oct 23, 2016 | RCA Televison & Video
New updates available for service issues such as freezing and start up/ recording issues (firmware 2011) are also available from the DGTEC website.download and put on usb drive
Please update software first before replacing hardware...
From DGTEC Website Software Upgrades page: -
Click on the relevant link below to download the latest software update for your DGTEC product. For further help and assistance, please access the DGTEC Call Centre via the Support page.
* DG-FV500PVR Upgrade (zip file 4.3Mb)
* DG-HD6760 Upgrade (rar file 2.3Mb) Upgrade instructions DG-HD6760 (25Kb)
DG-FV500PVR - 500GB HD PVR WITH TWIN TUNER (FREEVIEW)
DG-HD6760 - HD SET TOP BOX WITH USB RECORDING
DG-HDMP1080 - HD MEDIA PLAYER
DG-HDMP1080P - WIRELESS HD MULTI MEDIA PLAYER / STB
DG-HDMP1080TT - HD MEDIA PLAYER WITH TWIN TUNER
DG-HDMP500TT - (NEW MODEL RELEASE)
DG-DABVPR1TB - 1TB HD PVR WITH TWIN TUNER WITH INTEGRAT
DG-DABPVR500GB / DG-DAB+500PVR- 500GB HD PVR / TWIN TUNER WITH INTEGRATED
TV-6600 BAUHN UNIT- 500GB HD TWIN TUNER PVR
GG-HD1200PVR- BAUHN UNIT WITH TWIN TUNER
Note: - Master Override Password 1973
Read instructions carefully before commencing. Software needs to be carried out while the PVR is cold. Go to "Telefix" website and select "Service Guide" or "Download Service Manuals" and download software to a location on the PC Hard Drive.
Unzip file and copy "usb.upg" software onto a blank USB Memory Stick.
Plug USB Stick to USB port of PVR
Connect Power to PVR and switch on so that that the booting process commences.
Press 'Menu' button and scroll left or right by using the arrow buttons to find 'Installation' then press OK to select.
Note: PVR may freeze and not allow selection. Several attempts will be required to enable selection. If problem persists, switch OFF PVR to allow it to cool down then try again or use the alternative method.
1a. Disconnect mains power.
2a. Plug USB Memory Stick to USB port.
3a. Press and hold the CH down arrow button on the unit and then connect mains power.
4a. When the display starts counting down release channel button and the upgrade interface will appear on screen.
7. Scroll down to 'USB Menu' by using the arrow down button then press 'OK' to select.
8. Scroll down to 'USB Upgrade' by using the arrow down button then press 'OK' to commence software update.
· Note: - Please do not shutdown PVR or remove USB Stick during the update process. When the update is complete the PVR will power down and reboot again as normal.
Once the update has completed, reset the PVR by restoring back to Factory Default.
Press Menu ? Installation ? Factory Default ? enter password 0 0 0 0 ? Select 'Yes' ? press OK to rescan channels.
Check Software Version, Press Menu ? Installation ? Version Info ? OK
Apr 11, 2015 | Televison & Video
Feb 26, 2011 | Sony SLV-N70 VHS VCR
Apr 27, 2010 | GoVideo Go Video DVD/VCR Combo
Nov 07, 2009 | Televison & Video
Oct 23, 2009 | Sony STR-DG800 Receiver
Nov 17, 2008 | Bose 901 VI Main / Stereo Speaker
Nov 16, 2008 | Bose 901 VI Main / Stereo Speaker
Apr 11, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR
Oct 17, 2017 | RCA Televison & Video
90 people viewed this question
Usually answered in minutes!