Question about Lexar FireFly 2GB USB 2.0 JumpDrive

2 Answers

Flash disc ( stick ) will not work

Flash disc will not work in any usb port. The usb ports work on all other equipment. The light will not come on and nothing comes up on the computer. The information is not critical but I need it if I can get it or I will have to start over.  I have even tried the stick in the usb ports at work and nothing.

If you tell me there is nothing I can do, I can go with that information but I need  to know do I have to back up all of my flash disc like the floppy disc needed to be backed up

Thank you for your help

Posted by on

  • Anonymous Feb 07, 2008

    I bought a new lexar jumpdrive and I cant get it to download on my p.c.

    It works on everonyes but mine. How can i get this fixed if at all?

  • Anonymous Jan 14, 2009

    I'm using my Lexar FireFly and my laptop won't recognize it. This has never happened before now, and I've used it several times on this computer. I tried to use it on another computer, but it isn't recognized there, either. I really need the stuff on there, and I swear I will never put anything else on my JumpDrive without saving somewhere else anymore. Is there any way to get it recognized?

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 165 Answers

Some flash drives have a case that is too fat to be fully inserted in usb connector of some PCs, I have has the same problem, try a short usb extension cable, worked for me.

Posted on Jul 04, 2008

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 104 Answers

Have you tried it on a different computer? If you have and it still does not work it would be safe to say it is bad.

 

And yes you should always back up. I have external USB Hard Drives that keeps a copy of all of my "stuff"

Posted on Oct 21, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The usb ports on my acer 5250-0650 do not work when a memory stick is installed.


Have the ports ever worked? Have you opened the computer icon to see if the flash drive is being detected- but maybe not auto-starting? Also, if a drive is inserted (Windows system), you ought to see the "safely remove hardware" icon appear on your taskbar, near the clock. Clicking on the icon ought to show you the drive by name & drive letter.

Lastly, right-click Computer>properties>device manager>expand disk drives>if your flash drive is shown here, highlight it & uninstall the device. Remove the flash drive, then reinsert it. Windows will reinstall the driver & this may allow it to recognize the drive again.

Let me know?

Cheers

usb-ports-acer-5250-0650-not-work-when-5njn40hvq504omlyedyq4jqg-5-0.jpg

usb-ports-acer-5250-0650-not-work-when-5njn40hvq504omlyedyq4jqg-5-1.png

Feb 25, 2015 | Acer Computers & Internet

1 Answer

MY LC60LE745U BIG SCREEN WONT RECOGNIZE MY FLASH STIK


I believe your TV has 2 USB ports on it. If you have equipment connected to the other USB port, that port will get priority and the TV will ignore your flash stick. Turn off your tv, disconnect everything on your USB ports then insert the flash stick. Power on the TV and hopefully you can see the flash stick.

Mar 22, 2014 | Televison & Video

1 Answer

Usb not detecting


What are you sticking in the usb port?

Verify that the usb port works by sticking something else in it such as a small usb flash drive.

Try a different usb port.

Maybe you are trying to stick an external drive that is too large for the system to recognize.

Maybe the device you are sticking in the usb port does not work.

Apr 23, 2012 | Computers & Internet

1 Answer

The flash drive no longer operates on the computer, though the light flashes.


Sometimes when a flashmemory stick or USB external hard drive fails because it was not removed fromthe USB port properly. If the device is removed byjust pulling it out of the USB port, it can cause the flash device to fail, youmust click on the Safely Remove Hardware icon on the Task Bar and select thedevice you wish to remove and only do so when instructed to do so When the flash memoryUSB hard drive device appears to malfunction it maybe possible to restoreit by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - AdministrativeTools - Computer Management - Disk Management.Thenright click on Disk 1 removable drive and click Format. After the flash drivehas been formatted it will indicate that it is Healthy.

Jul 01, 2011 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

When i plug my 4g cruzer micro usb memory stick nothing happens the cpmuter dosnt read that it is plugged in


Try a different USB device on each of the USB ports on your computer.
Hopefully, all your USB ports are working correctly.

Try a different USB port on your computer.
Hopefully, the SanDisk will be detected on one of the ports.

Try a USB port on a different computer.
If the SanDisk still is not detected, then spend $10 to buy a new 4GB flash-drive.

May 22, 2011 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

1 Answer

Memory stick in laptop then would not access my files. Light on. Took memory stick out and in - no light no recognition.


The flash drive may be damaged if it was dropped recently etc. Try a different USB port on the computer most computers have more than one.

May 02, 2011 | SanDisk Cruzer Micro 4GB USB 2.0 Flash...

1 Answer

My memory card does not format and has msdc error.how can i format it in windows xp because when i try to it brings windows can not format the disc.


Hi ,JHONPIX

If your computer affected by virus,then your memory card will not show in the pc .so you will install it to another pc,and format it .Flash drive can not recocknize,becayse there are some reason .

  • VIrus affected
  • Sometimes when a flash memory stick or USB external hard drive fails because it was not removed from the USB port properly. If the device is removed by just pulling it out of the USB port, it can cause the flash device to fail, you must click on the Safely Remove Hardware icon on the Task Bar and select the device you wish to remove and only do so when instructed to do so.

When the flash memory USB hard drive device appears to malfunction it may be possible to restore it by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted then it will indicate that it is Healthy.

If this doesn't work then it is faulty.
www.artplus.hr/adapps/eng/dpr.htm
www.CardRecovery.com

hope it will help you

Apr 25, 2011 | Computers & Internet

1 Answer

My 16GB usb flash drive is not working. it is shown on safety removal & device manage, but when i try to open it the please insert disc message appeard


Sometimes when a flashmemory stick or USB external hard drive fails because it was not removed fromthe USB port properly. If the device is removed byjust pulling it out of the USB port, it can cause the flash device to fail, youmust click on the Safely Remove Hardware icon on the Task Bar and select thedevice you wish to remove and only do so when instructed to do so When the flash memoryUSB hard drive device appears to malfunction it maybe possible to restoreit by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - AdministrativeTools - Computer Management - Disk Management. Then right click on Disk 1removable drive and click Format. After the flash drive has been formatted itwill indicate that it is Healthy.

Apr 10, 2011 | A-Data Technology Adata USB C802 8GB BLK...

1 Answer

My memory stick pro-hg duo just stopped working all of a sudden for no apparent reason, it can't be recognized by any of the devices i have that support it, is there a way i can repair it


Sometimes when a flash memory stick or USB external hard drive fails because it was not removed from the USB port properly. If the device is removed by just pulling it out of the USB port, it can cause the flash device to fail, you must click on the Safely Remove Hardware icon on the Task Bar and select the device you wish to remove and only do so when instructed to do so.

When the flash memory USB hard drive device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash or USB hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.

If this doesn't work then it is faulty.

Dec 21, 2009 | Sony Electronics - Others

Not finding what you are looking for?
Lexar FireFly 2GB USB 2.0 JumpDrive Logo

Related Topics:

689 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexar Electronics - Others Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Willem.
Willem.

Level 2 Expert

359 Answers

Are you a Lexar Electronics - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...