Question about Sony SPP A945 Cordless Phone (SPP-A945)
Phone went dead. There is no dial tone. But rings when called from a second phone. The ring stops with lifting of handset but no voice is heard. With the call button on the base unit on the unit is catching some radio signal from an
fm station. Tried to reset the unit as per sonyEsupport. But did not work. Please suggest.
SOURCE: Base station on SPP-N1000 rings
Ok IF you can answer the Call and it still continues to ring, then this is a real wired problem, Usually, the "Ring" cycle, is used to "Trigger" a "Alerting" circuit that then makes a sound, when the call is answered, this "Resets" this circuit. Now IF it does continues, to ring AFTER the handset has answered the call as normal, then obviously, either the handset, is sending the correct signal back to the base, and the base is putting the call through, BUT the Ring Circuit, isn't being Reset. The fault, then must be with the base. You will have to get it looked at. As an aside, when does it stop, I mean it must, or that would have been your query too? No? So I assume, that it does eventually, stop, I expect it would, as usually, you would design in a "Watch Dog" circuit, that would, time out, if the circuit, didn't reset itself after a pre-defined period. So, Thats the Diagnosis, you will have to repair or replace. As usual though, remove from power, reset as if new, if still faulty. You know what to do.
Posted on Apr 16, 2010
Tips for a great answer:
Jul 21, 2016 | Sony SPP A945 Cordless Phone (SPP-A945)
Jan 10, 2016 | Phones
Sep 01, 2015 | Phones
Jul 15, 2014 | Sony SPP A941 Cordless Phone
Nov 06, 2013 | Uniden DECT 6.0 Cordless Telephone...
Mar 22, 2011 | Uniden DECT 2080-5 Quint Phone
Apr 16, 2010 | Sony SPP N1000 Cordless Phone
Apr 23, 2009 | Sony SPP A1050 Cordless Phone
Nov 20, 2008 | Panasonic KX TGA270S Cordless Expansion...
Dec 08, 2009 | Sony SPP A945 Cordless Phone (SPP-A945)
32 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: