Ir code for universal remote controle - Computers & Internet

Telefunken Smart Remote - Android Apps on Google Play

https://play.google.com/store/apps/details?id...telefunken.SmartRemote...

Rating: 3.5 - ‎758 votes - ‎Free
Control your Telefunken SmartTV over your mobile devices. ... Rod Doesn't recognisemy TV, keeps prompting to make sure it is connected to same wifi LAN, which it is. Adonis Kusema .... Pre-ordered. IR Universal Remote™ - IR 2.0.

Av 10 Universal Remote Control Manual - Scribd

https://www.scribd.com/doc/.../Av-10-Universal-Remote-Control-Manual

May 21, 2011 - Av 10 Universal Remote Control Manual. (1 rating) ..... codes are ineffective or your TV srI brand is Dot oillbe code ..... TV2 0075 Telefunken TV

telefunken tv remote control DVD & Blu-Ray Players ... - Fixya

Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. We have a few different codes for each of our different models of remotes. You should be able to locate the model of your remote on the back of the DISH remote at the top, usually a two to three digit number with a decimal point. I will list here for you the best codes for our more popular models of remotes and the instructions for addressing your Emerson TV to the remote. I hope you find this information useful and if you have any further questions please let me know.
Remote models Remote codes
3.0, 3.1, 3.2, 3.4 IR remotes - codes 569, 632, 505, 516, 669, 627.
5.0, 5.2, 5.3, 5.4 IR remotes - codes 632, 667, 666, 233, 660, 733, 846.
4.0 and 4.4 IR/UHF remotes - codes 733, 632, 656, 569, 846, 516, 627.
6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 733, 632, 569, 738, 764, 506, 516.
20.0 IR and 21.0 IR/UHF remotes - codes 672, 632, 654, 516, 777, 846, 738.

Instructions for addressing the remote to the TV
1. Press and hold down the TV mode button until all the mode buttons light up red.
2. Enter the 3 digit code for you TV.
3. Press the pound(#) button once.
4. Test the TV functions on your DISH remote.
5. Press the SAT button once.

Universal remote controls (like the one for your comcast cable box in which it allows you to control other devices) have "the most popular" IR codes programmed inside of it. When you type in the numbers "10812,10702, etc" you are telling the remote to use that particular IR code within its "database"
The key thing to know is that universal remotes do not have every code, just the most popular. If you have tried all of the codes listed in the manual for you model TV there's not much you can do.

• Try searching for a code. Some brand names, such as "Akai" may have other manufacturers parts inside of it, Searching usually is done by going through certain key-presses on the remote to try all of the codes available.
• Buy another Universal remote, not all remotes are created equal as some have mode IR codes built in than others, if you have an odd brand TV, it may be more difficult to come across one that works.
• Buy a learning universal remote, although usually more expensive these remotes will allow you to "learn" the IR codes from your old remote to the universal remote.

I hope this helps.

The code for a universal remote, I used a Sky + remote is 1936. Switch tv on and not in standby, press Tv button on remove, press select and red button for 5 secs until you see the IR button flash twice. Enter 1936 code, the IR will flash again twice. Done. Test using remote on/ off button. This works for MATSUI TVR185 TS. If there is a PIN code, reset holding vol - on tv and holding number 7 on remote at same time. You will see a PIN OK message on screen.

macsimusm

Depending on the Universal remote model, there are different codes that are associated with the remote and component you want to program the remote to. I have provided a link with remote codes for different Universal remotes. I hope this helps.

Ray Calo
DISH Network

Find codes and methods here.
http://www.docstoc.com/docs/23925020/Programming-Remote-Control-Brand-Codes-TV-Sets

If those codes dont work try the last three(or four) numbers of your TV's serial number.

On my universal remote is just a matter of holding down the TV button till the light stays on, then punching in the three digit TV code. When the TV turns off it's the right code. But read your manual for your controller.

www.remotecodelist.com

www.tvcodes.com

www.remote-codes.com

ww.hifi-remote.com/ofa/codes.shtml

http://tech.dishnetwork.com/departmental_content/TechPortal/content/tech/remotehome.shtml

Code 720# for my 26" insignia tv on me bell remote 3.2 IR - 137181 and it worked for me. Click on link choose the type of remote you have.

Good luck

Lapete