Question about Baumatic 23 in. BDW5 Built-in Dishwasher

1 Answer

Baumatic BFD64SS Diswasher - power light on but can't programme

The power light comes on when pressed and the front panel lights up but nothing happens when I press the programme button. Normally I can select P1 P2 or P3 etc - but nothing works when I press it. Help!

Posted by on

  • Anonymous May 20, 2009

    Have the BDW5 full height dishwasher. All the lights are lit at the same time but not flashing, stop button not turning them off. Nothing in the manual under troubleshooting, only mentions probable cause if lights are flashing, which is something to do with door not being closed correctly. Door is definately closing, checked and no obstructions. Had to turn off at mains. Anyone have any ideas.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Http://www.manualnguide.com/dl/12334/

Posted on Jan 25, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi dishwasher ZDF601M 1 in 3 red light comes on and programme doesn't work through


26269906-aipk5px1bmfkdpsmrgevaqwn-3-0.jpg "3 in 1" function
This appliance is equipped with the "3 in 1" function, that
allows the use of the "3 in 1" combi detergent tablets.
This function can be selected with all washing programmes.
With the selection of this function the inflow of rinse aid and
salt from each respective supply container is automatically
deactivated and also the indicator lights for salt and rinse aid
are deactivated.
Select the "3 in 1" function before the set of a washing
programme.
Once this option is selected (indicator light illuminated) it will
remain active also for the following washing programmes.
With the use of the "3 in 1" function, the cycle durations may
change. In this case, in the digital display, the indication of the
running time of the programme is automatically updated.
NOTE: Once the programme is running, the "3 in 1" function
can NO longer be changed. If you want to exclude the "3 in 1"
function you have to cancel the programme setting (see
chapter "Starting a washing programme" - "Cancel a washing
programme in progress") and then deactivate the "3 in 1"
function.
In this case you have to set a washing programme (and
options) again.

Activation/deactivation of the "3 in 1" function
(The dishwasher must be switched off)

1. Press the On/Off button. The On/Off indicator light
illuminates (setting mode).If a programme button indicator light is on, this means that a washing programme is set. The programme must be cancelled: press simultaneously function buttons 2 and 3
for about 2 seconds. All the indicator lights will turn off (except for the On/Off indicator light and eventually salt and rinse aid indicator lights) indicating that the set programme has been cancelled and the machine is now in setting mode.

2. Press simultaneously function buttons 2 and 3, until the
indicator lights of function buttons 1, 2, 3 and 4 start
flashing.

3. Press function button 4, the indicator lights of function
buttons 1, 2 and 3 turn off while the indicator light of function
button 4 goes on flashing.

4. Press function button 4 again, the "3 in 1" indicator light
illuminates, indicating that the "3 in 1" function is active.
To deactivate the function press function button 4 again, the
indicator light turns off.

5. To memorise the operation, switch off the dishwasher by
pressing the On/Off button or wait about 60 seconds after
which the dishwasher will automatically return to setting
mode.

Dado

Aug 29, 2016 | Zanussi Dishwashers

1 Answer

Won't power on


Hold the power button down for about ten seconds and it'll actually turn off. Press the power button and see if it restarts.

Nov 03, 2015 | Computers & Internet

1 Answer

When I go to make the settings - as per manual it comes up P1 3:20, but when I press the 'menu' button nothing seems to happen. I expected to see P2, P3 etc so my white bread (P1) is terrific


Sometimes the little buttons underneath are not centered properly. Try pushing around the edges of the "menu" selector button your machine makes a "beep" sound" If you never feel the button move under your finger followed by the "beep" sound then your selector menu button may be broken.

Apr 16, 2013 | Russell Hobbs 18036 Breadmaker Fresh Bread...

2 Answers

Samsung LN46D630 Wont turn on


http://www.tvrepairdoctor.com

Oct 26, 2012 | Samsung LN46D630 LCD TV

1 Answer

Washing machine will not start


we had a very similar problem, our machine is only 12 months old and the filter at the bottom front of the machine has a small fan in it the filter was blocked with a coin blocking the fan from turning after reomoving the coin the fan was able to turn and the machine functioned correctly. hope this helps. tony

Jul 19, 2012 | Tricity Bendix AW1000W Front Load Washer

2 Answers

I select a programme and then press the start button, the door locks but the start light flashes, and nothing happens


When the program is pressed to start then the inlet valve must open and allow the water to come to the drum. if this is not happening then check the voltage to the inlet valve, if there is no voltage then the program controller is not outputting and so defective.
If not the inlet filter/valve is clogged and will need a back flush .

Apr 11, 2011 | Washing Machines

2 Answers

My 4 wheel drive will not this ingage


Does the light come on? There is a electronic engage motor on the on the front diff remove press button and watch or remove and connect to 12v of power if nothing happens replace

Oct 21, 2010 | 1999 Chevrolet K1500

Not finding what you are looking for?
Baumatic 23 in. BDW5 Built-in Dishwasher Logo

Related Topics:

515 people viewed this question

Ask a Question

Usually answered in minutes!

Top Baumatic Dishwashers Experts

Oloyede Monsuru

Level 3 Expert

1417 Answers

Kolbrun...

Level 3 Expert

1214 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Baumatic Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...