Question about Whirlpool LER5636P Electric Dryer

1 Answer

Element heats, dryer tumbles, no heat in drum, never shuts off

Whirlpool Mod. LER5636JT0.....I put a load in one night and in the morning the dryer was still running. The clothes were still damp. Took the heating element out and turned the dryer on, it heated up. Checked for lint in exhaust....clean. Put dryer back together and no heat and it didn't stop running. Used sensed cycle and timed cycle. No difference.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,136 Answers

Hi, If the dryer heats but will not advance in either time or auto cycles, you need to change the timer.
You can test to see if the timer is getting voltage. Remove the top rear panel and locate the two wires going to the timer motor. There should be 120V when the dryer is running in time dry.
Please let me know if this helps or if I can assist you further.

Thanks
Vic

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to Replace A White Knight Tumble Dryer Heating Element Heater and Thermostat


How to Replace A White Knight Tumble Dryer Heating Element Heater and Thermostat


For a full list of appliance Video Repair help see our video section
White knight tumble dryer not heating this video show you how to change and fit a new heating element and thermostats can be used on Ariston, Electrolux, Ignis, Neutral, Tricity Bendix, Whirlpool,
Here is the element in this video
For all you tumble dryer spare parts click here

The easiest way to find you part is put your model number into our search bar at http://www.apart4u.co.uk/ TEL 08455218000
http://www.apart4u.co.uk/news/category/questions-and-answers/diagrams/

on May 10, 2010 | Abbaka White Knight 38AW Electric Dryer

1 Answer

No heat , drum turns and wont shut off


Often a dryer heating element burns out, but doesn't trip the circuit breaker or blow a fuse. The heating element is simply a long coil of special wire. You can check it for continuity with an ohm meter. No continuity means the element is bad and you need to replace it--electric heating elements aren't repairable.
Hi, On many dryers, there's a thermal fuse mounted to the exhaust duct inside the back cover panel. The fuse--which is about an inch long--is usually embedded in black resin and mounted in a white plastic housing. If the fuse has blown, you need to replace it. (You can't re-set it.)
A common problem is for the main wiring connection from the house, at the dryer, to burn and break its connection. Because the dryer can still tumble with partial power, the connection may be only partially defective. You may need to replace both the power cord to the dryer and the terminal block inside the dryer that the wire is attached to.

May 05, 2010 | Whirlpool LER4634J Electric Dryer

2 Answers

My tumble drier has no heat and the reset button does not seem to be working


could be thermal limiter fuse in the back of the dryer. this can cause it to not heat but still the drum will turn

May 01, 2010 | Abbaka White Knight 44AW Electric Dryer

2 Answers

White knight tumble dryer not drying clothes. element is still hot. what is the problem?


How to Replace A White Knight Tumble Dryer Heating Element Heater and Thermostat

For a full list of appliance Video Repair help see our video section
White knight tumble dryer not heating this video show you how to change and fit a new heating element and thermostats can be used on Ariston, Electrolux, Ignis, Neutral, Tricity Bendix, Whirlpool,
Here is the element in this video
For all you tumble dryer spare parts click here

The easiest way to find you part is put your model number into our search bar at http://www.apart4u.co.uk/ TEL 08455218000
http://www.apart4u.co.uk/news/category/questions-and-answers/diagrams/

Mar 23, 2010 | Whirlpool Dryers

1 Answer

It tumbles - no heat and just keeps going and going


You either have a bad element or thermal fuse. Most likely a thermal fuse. You can access it by removing the back panel. If you find that it's the thermal fuse, you will need to replace the cycling thermostat also. When it goes out, the dryer then cycles off of the thermal fuse until it goes bad.
Please rate solution

Sep 04, 2009 | Whirlpool LER5636P Electric Dryer

1 Answer

Dryer ran all night now no heat


Remove back of dryer and take out the elament shield and replace element don't over strech it start at one side and work it around thank you for useing fixya rate me

Jul 13, 2009 | Estate TGDX640JQ Gas Dryer

1 Answer

My dryr tumbles but does not dry


Gas dryer? First thing to check is the ignitor underneath the drum. (You have to open the panel to see it)  It should glow shortly after the dryer starts, then the flame starts and the ignitor shuts off.  If the ignitor is glowing but the gas does not light then the gas valve coils may have to be replaced.  If the gas ignites but does not stay on either the flame sensor or the coils are at fault.

Electric dryer? Temperature sensor has failed or heating element has burned out.

May 30, 2009 | Whirlpool Dryers

2 Answers

Tumble Drier does not heat - Its a white knight. What would be the likely cause and is it repairable?


How to Replace A White Knight Tumble Dryer Heating Element Heater and Thermostat

For a full list of appliance Video Repair help see our video section
White knight tumble dryer not heating this video show you how to change and fit a new heating element and thermostats can be used on Ariston, Electrolux, Ignis, Neutral, Tricity Bendix, Whirlpool,
Here is the element in this video
For all you tumble dryer spare parts click here

The easiest way to find you part is put your model number into our search bar at http://www.apart4u.co.uk/ TEL 08455218000
http://www.apart4u.co.uk/news/category/questions-and-answers/diagrams/

Nov 01, 2008 | Dryers

Not finding what you are looking for?
Whirlpool LER5636P Electric Dryer Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Are you a Whirlpool Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...