Question about Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher
Bought a Bosch Aquasensor SGS4702AU and need a user manual. Please help
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
can you supply the complete model # for me and also an e-mail address and i will e-mail you the pdf file.
Posted on Sep 25, 2008
no problem. the model # is usually located on the inside rim of the cabinet. open the door and locate the sticker itself. i will also need your e-mail address, so i can e-mail you the pdf file.
Posted on Nov 05, 2008
check and see if there is water in the base by removing the toe kick. if so then it activated your float micro switch. clear the water from the base. i use a wet vac, but if you don't have one just soak it up with towels. once that styrofoam piece on the left side of the base isnt submerged in water anymore then it should start. it could be a broken hose or bad part. check hoses if you have a rat or mouse lingering. otherwise i have also seen flexable cutting boards blocking the condensation hole on the inside of the tank on the right wall. if you think it was that then just keep those flexy cutting boards on the left side or top rack.
if no water is down there.. then where that styrofoam piece sets on the left side. find that red plastic rod and flip it upward a few times to un-stick the float switch with the dishwasher unplugged first of course.
Posted on Mar 19, 2009
SOURCE: I need a user's manual
Please rate this solution if you find it helpful. Thanks!
The Aqua-Stop function is a flood protection feature. You really don't want to be "bridging it"!
It works by using a float switch to detect when the water level gets too high in the wash compartment. It over-rides any wash programme and starts the pump to empty the water out.
Also if water leaks into the bottom of the dishwasher (under the washing compartment) the float will rise with the water level and when it reaches a critical point, it will over-ride any washing programme and run the pump.
However, the pump cannot remove water from under the washing compartment, but as it over-rides the wash programme, it prevents the washer from continuing with any wash cycle, thus preventing any more water from leaking into the bottom of the washer and flooding your house.
For this reason, you should never attempt to "bridge" (whatever that means) modify or disable the aqua-stop feature. If it's been activated, you have a problem which needs to be resolved before you continue to use the washer.
Here is a direct link for downloading your manual from Bosch (free):
Posted on Oct 16, 2010
Testimonial: "Thanks the detailed informations."
Tips for a great answer:
Dec 29, 2016 | Bosch Dishwashers
Oct 19, 2011 | Bosch 24 in. SGS45E02 / SGS45E08 Exxcel...
Oct 17, 2011 | Bosch 24 in. SGS45E02 / SGS45E08 Exxcel...
Apr 27, 2011 | Dishwashers
Aug 28, 2010 | Bosch 24 in. SHU5305UC Built-in Dishwasher
Sep 07, 2009 | Dishwashers
Dec 31, 2007 | Bosch 24 in. SHU5305UC Built-in Dishwasher
Nov 17, 2007 | Bosch 24 in. SHU5305UC Built-in Dishwasher
2,271 people viewed this question
Usually answered in minutes!