Question about Hitachi 43UWX10B 43" Rear Projection Television

1 Answer

Connection problem How do i connect my satelite box to the t.v. do connect in uhf/vhf or convertor slot projection screen 43-46 inch with the genuis remote clu-910gr

Posted by on

  • gailsmith38 May 27, 2009




    Thank you this worked great!!


×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

You can connect via a coax cable from the sat. box to VHF input of your TV and tune on ch 3 or 4 or connect via a RGB cable to component input of your TV or a regular Audio/Video composite cable will connect sat. receiver to your TV use yellow color for video and red&white for stereo Audio then choos the connected input on the menue and watch sat.

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cannot get a signal on my phillips t.v. iput and antenna n zenith digital converter box n say`s no signal


Hi. Convertor boxes have a preset channel output. This is either in the VHF region (channel 4) or somewhere in the UHF region (like most video's on channel 36 or 38). Switch on the convertor, and try a scan on your TV. You must be able to locate the output channel from the convertor. At least if this one is ok, or receiving.

Oct 05, 2014 | Televison & Video

3 Answers

I am not good with electronics. Have bought a jensen antenna for a tv - tv611 - how does the UHF n VHF wires both fix into the 300/75-ohm balun????


Go to walmart but UHF/VHF connector,one that you can connect both wires too and then plugs into TV.Cable IF

Aug 21, 2010 | Televison & Video

1 Answer

I DON'T KNOW HOW TO CHANGE MY TV TO CABLE OPTION RATHER THAN UHF OR VHF


Well let me ask some questions!
1) UHF and VHF are types of off air antenna source signals.
2) Cable TV has both the Analog 'UHF and VHF' signals on them along with the new Digital TV signal sources.
A) Is you TV have a Digital Tuner built into it or are you using a CABLE TV box to hook up to your TV?
Blessings always,
A/V Media Tech Guy

Nov 29, 2009 | Televison & Video

1 Answer

Message on screen


OTA stands for "over the air"and for a std TV it is searching for VHF/UHF signals as beamed from satellite. If the antennae is properly mounted and connection don't have any sulpher deposits, then the tuner has to be replaced. As far as the antennae, the basiscs are:
Based on this information, you need an antenna that receives high vhf and uhf. KVIE (ch 9, PBS) and KXTV (ch 10, ABC) are high vhf and not receivable with the CM 4220. I would recommend the Winegard 7694 or HBU-22 antennas. The Winegard has higher gain and is a 5 inches shorter than the HBU-22. Shorter boom length and higher gain will come in handy with an attic install. However, 7694 is more expensive ($60 vs ~$40).........................................sodeep

Sep 30, 2009 | Televison & Video

1 Answer

Has anyone figured out IF such a digital anntenna exist yet?


You don't need a digital antenna; any indoor UHF/VHF antenna will work. The antenna and the TV both connect to the converter box, not to each other.

A standard rabbit ears (UHF/VHF) antenna with flat wire (300 ohm) connections can be hooked up to the coaxial cable that goes to the Antenna (RF in) jack on the converter box by using a balun (Radio Shack catalog # 15-1297, about $8). If you have an antenna with coaxial cable already attached, you don't need the balun.

To connect the TV to the converter box, you need an adapter that has an F jack on one end and a 1/8" plug on the other (Radio Shack catalog # 278-257, about $5). The 1/8" plug on the adapter goes in the external antenna jack on the TV, and the other end connects to the coaxial cable that goes to the TV (RF out) jack on the converter box.

Jun 08, 2009 | Casio TV-980 2.3 in. Handheld Television

1 Answer

Local channel went digital, lost signal.


You need a digital to analog convertor box to recieve the digital signal.

All UHF+VHF signals will be digital starting in June.

Thanks for using FixYa - a FixYa rating is appreciated.

Feb 20, 2009 | Televison & Video

1 Answer

I have a Westinghouse 26 inch TV. Model # SK-26H590D. It will not scan channel 9. I have tried both the automatic scan and the find channel scan. It is hooked to a Phillips Mant 510 vhf/uhf indoor antenna...


I carried my Westinghouse TV to the basement. Unplugged the antenna from the digital converter box and connected it to my digital TV. I then re-scanned for channels and found channel 9. After carrying the Westinghouse TV back upstairs, I connected the original set-up and tuned to channel 9 which was now showing on the screen as no signal. From that point I moved my VHF dipoles until I had located the correct position for reception. A little labor intensive, but I was fortunate to have another antenna that was receiving channel 9.

Feb 19, 2009 | Westinghouse SK-26H590D Television

1 Answer

I have an rca antenna model ant110. & i don't get where/how to connect the uhf part [round metal piece] the picture on line is not clear & we do not have the box it came in. thank you


You will need a Vhf/uhf combiner to attach to the antenna to new TV's. Check with your local TV repair shop, they should be readily available.

Dec 17, 2008 | Televison & Video

1 Answer

Best picture and sound


connect coaxial cable connector from your cable service company to cable box-----in jack.
2-using coaxial cable connect cable box out to tv-vhf/uhf jack.
connect projection tv audio out (var-fix)jacks to avr 230 line in.

Aug 22, 2008 | Audio Players & Recorders

Not finding what you are looking for?
Hitachi 43UWX10B 43" Rear Projection Television Logo

102 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2315 Answers

The Knight
The Knight

Level 3 Expert

73691 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...