Question about Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

TV will not turn on to channel 4 everytime. I have a cable box and need the tv to remain on channel 4.

I bought a LC-C4067U and have a basic cable box. How do I set the TV to turn on to channel 4 every time without resetting the tv channel?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 108 Answers

As long as the tv is not unplugged it should stay on the same channel when turned back on. If you have the tv plugged into the cable box, when the box is shut off it basically unplugs your tv and the tvs memory is reset. The tv should be plugged in to its own outlet or leave the cable box on and turn off the tv. If you turn everything on, cable box and tv, and have a picture, go into the tv menu and auto program the channels, it should only lock in on channel 4 since it will be the only channel the tv will receive.

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My sharp tv wont change channels not even on tv buttons


I am going to assume you have auto-programmed the TV. If you haven't, do so and let it finish. Make sure you are in the right mode, e.g. Antenna for over the air and Cable for basic cable.

If you have a set top box or satellite, that box changes the channels, not the TV.

If auto-programmed it and it still won't change channels you have a bad tuner and you will need a new Main board to fix it.

Feb 15, 2015 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

1 Answer

How do I tune my Sharp tv to channel 3 so the cable will work?


Go to the Tuner setup screen and select cable instead of air. Then put the TV on Channel 3 and connect the cable box to the antenna connector on the TV.

Jul 04, 2014 | Sharp LC-26DV24U 26 in. LCD HDTV/DVD Combo

1 Answer

TV only detecting channels 2-13 should be detecting 2-63


Go back to the initial set up procedure for your Sharp TV and do a search for active HD channels. They will be decimal numbers such as 13.1.

Jan 13, 2014 | Sharp Aquos LC-42D62U 42 in. LCD HDTV

3 Answers

I have two remotes. One to turn on the cable box and one to control the TV on/off and volume. When I was watching TV I hit the wrong bottom for the volume and now my TV is just noise and so picture. Can...


If the cable from the cable box is attached to the TV via a coax cable, then all you need to change the TV channel to either Channel 3 or Channel 4. You may have accidentally push the CH button on the TV remote. Please post back what you find.

Mar 11, 2011 | Sharp LC-19SB25U 19 in. LCD HDTV

1 Answer

My insignia tv shows a NO DATA BASE error on screen. How do i fix this.


Try these tips:

Connecting your Cable box through Coaxial to the TV.
1- Turn on the TV and the Cable Box, secure all the coaxial connectors.
2- Press the "TV" button to be sure you are in the TV mode.
3- You need to set the TV in a specific channel for receiving the signal from the Cable Box, usually they are channel 3 or 4. Please press in the TV's remote those channels numbers and check if you are receiving signal about the Cable Box in any of them.
4- If you do, afterwards remember to continue using the Cable Box remote to change the channels instead of the TV one.

Connecting your Cable Box through RCA to the TV
1- Turn on the TV and the Cable Box, secure all the RCA wires.
2- Press the "TV" button to be sure you are in the TV mode.
3- Press the "Input" button to go to AV1 or AV2 depending where the Cable box is connected.
4- You should be receiving signal instantaneously after you have changed the Input and keep using the Cable Box remote for changing the channels.

Jun 21, 2010 | Insignia LCDTV26 26 in. Television

1 Answer

How do i hook up my 16-454 to my verizon fios cable?


I am not sure what a FIOS use, but I was able to split my cable connection and was connect my regular TV AND portable tv with the cable.

IN YOUR CASE:
Look at your fios set up box, behind the box, there should be something that would say "TO TV" or "VIDEO OUT" or "TO TV/VCR"

Usually, the cable coming out from there goes to your regular TV. So instead of your regular TV, you can connect that with your portable TV.


AS FOR MY CASE (Having 2 tv's),

1. I removed the cable that is connected to the wall (RF IN or From WALL or CABLE IN).
2. I hooked that end to the "IN" part of a 3 way splitter
3. I bought a short cable and connected one end to the Cable Box and the other end to the OUT of the splitter
4. I bought a longer cable and connected one end to the portable TV and the other end to the OUT of the splitter.

5. Then I turned on the TV and pressed MENU
6. I clicked the right arrow until I see ANTENNA. I pressed the down button to choose CATV instead of AIR.
7, I did auto scanning.
My portable TV now has the basic channel while the big TV (since it is connected to the cable box) has the added digital channels. Nevertheless, it is great to have both so when I want to sleep, my hubby can just use the small tv

Jul 02, 2009 | Accurian 16-454 Television

2 Answers

Cable channels wont program above 27 w my basic cable


Hi classmom2,
I will be happy to help.
You have probably tried this but I will go over it anyway. If it dosn't work we will try something else.
From the video menu on the tv, select the tuning band of CABLE not AIR. Then do a Auto-Channel Search.
From what I gather you have basic cable without a cable box correct?
Let me know what you find and we will go from there.
Lone99star

Jan 24, 2009 | Sharp LC-26D7U 26 in. HDTV LCD Television

1 Answer

Can't get all my cable channels


what cable company do you have because you should have a cable box because only a cable box can scramble the frequency so you can get the channel you subscribe for

Dec 17, 2008 | Sharp Aquos LC-32G4U 32 in. HD-Ready LCD...

1 Answer

Cannot program cable to tv


if your are using a cable box,all of your channels will be control only on the cable box.so, what you are going to do is use the remote control of the cable box.

Nov 07, 2007 | Panasonic PV-C1320 13 in. TV/VCR Combo

Not finding what you are looking for?
Sharp Aquos LC-46D62U 46 in. LCD HDTV Logo

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sharp Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73665 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

Cindy Wells

Level 3 Expert

5059 Answers

Are you a Sharp Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...