Question about Watches

2 Answers

I need to know how to set the time on the digital screen and the regular clock. thanks

Posted by on

  • gdipeolu May 27, 2009

    I really need step by step instructions on how to do this. i consider myself highly intellgent but these item kepp poppingg up on thhe screen. khi, stw,ali, h-set tmr. these seem to just disappear as soon as I try to adjust anything. I did go to the casio website and could not locate a website for model #g-303b.do you have acess to this model or have any further suggestions. thanks in advance.

×

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 86 Answers

Hi i think this is exactly what you are looking for

>http://ftp.casio.co.jp/pub/world_manual/wat/en/qw2759.pdf

if that doesnt work then here is the link to download

>http://www.generalmanual.com/Watches-Clocks/Casio-G303B-2AV-G-Shock-Watches.htm
just scroll to download now

good luck!

Posted on May 27, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Watches Master
  • 2,923 Answers

What is the brand and the exact model number of your watch?

  1. Step 1 Take a look at your watch. While models and brands vary, you'll find a few things in common on almost all of them. First, they'll have different modes of operation. A typical digital watch may have modes for time, stopwatch, date, alarm and timer, to name a few. Look on your watch for a button labeled "mode." Press it several times to see what's available. Typically the watch will display the name of each mode as you push the button repeatedly. When you've found the mode you want to adjust, stop there.
  2. Step 2 Look for a button that is labeled "set" or "adjust" on your watch. The location will vary, depending on the brand of watch you own. Press in and hold this button. After a few seconds, the time (or whatever mode) you have selected will begin to flash. In most cases, you'll need to select the item you want to adjust (minutes or hours) by pressing "mode" again. Once the portion you want is flashing, you're ready to adjust it.
  3. Step 3 Press a button to advance the parameter (hours or minutes) that you've selected. This button may or may not be labeled. If it isn't labeled, you'll have to experiment with different buttons. Once you've set the first parameter, change to the second by pressing "mode." Follow the same routine to adjust. To exit, you'll typically press the "set" button.
  4. Step 4 Use resources available to you. There are thousands of digital watch styles on the market, each with slightly different setting methods. When you buy a watch, tuck the manual away in a safe location for reference. If you don't have the manual, do a website search. Most major manufacturers keep their manuals online for easy future reference.
Have a great day!

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

To be able to change to analog time from military time


Go to your events/calendar. Click the little settings symbol there. Then uncheck 24-hour time and save. How do I change my clock settings from military time to regular time.

just found this on the internet dont no if this will help you out if not let me no.

Nov 19, 2016 | Able Watches

2 Answers

The watch shows time in digital plus has hands on it like a regular watch the digital shows one time and the hands show another


Hi jessestaton,

All you would have to do is change the time from either the digital mode or the anolog hands , you can choose one which is incorrect and try to change it.

Now to change the analog clock's settings , you would have a button which you can manually rotate and set the time, this is how you would be able to recognise that it's for the anolog time modification.

If you need to change the digital time , all you have to do is find out buttons that are present on the watch , and then try to change the time.

Note:- If you find a circled knob , remember that could only be for anolog time change as digital time is never changed using such knobs or screws , but have seperate button for that function.

In case you have any queries, feel free to get back.

Hope this helps ..:)

Jun 12, 2011 | Watches

2 Answers

I just bought this watch but can't figure out how to set: time, date, and alarm. Please help. Thank you


set time/datepush the pusher at 4:00 for couple second to start setting mode.pusher at 4:00 is to select time/date, pusher at 2:00 is to adjust time/date
2. if off sync between analog and digital clock happen. You need to resynstep 1: follow the instruction 1 to set digital clock to 12:00.step 2 : push and hold both pushers at 2:00 and 4:00 for couple second until it shows sync modestep 3: once it enter sync mode, you can use pushers at 2:00 and 4:00 to adjust the analog time to 12:00 same as digital.step 4: push the pusher at 3:00 to exit the sync mode. step 5: follow the instruction 1 to adjust digital time to correct time. Analog time will adjust it automatically.

Jan 14, 2011 | ESQ 07301132 Aerodyne watch

1 Answer

I live in Eastern Time Zone. My atomic clock shows map of USA in top right hand corner and it is set in Western Time Zone. How do I reset to Eastern Time Zone? I have had atomic clock for several years. I...


The "mode" button is there to change the function of the + & - buttons.

If you press the mode button several times you will cycle through the various setting features of the clock.

Look for the one that sets the time zone and use the + or - buttons to select your zone.

Some experimentation may be required!

Feb 25, 2010 | Casio GW1500A-1AV G-Shock Atomic watch

2 Answers

The anlog display does not synchronise with the digital display.There is a time difference of 2.5 hours. I got the batterie replaced which didn't change anything.Thank you in advance for your help


Activate the crystal, then find the clock calendar function. Hold the center button for 5 seconds until a synchro appears on the data screen, then start pushing top button to move the minute hand to the 12:00 then push bottom button to move minute hand to 12:00. after this is done hold center button for 5 seconds and hans will move to match time on your digital display. Now that you are synched,you can set time as you normally would.
JRH, Rhode Island

Nov 25, 2009 | Tissot T-Touch T33159851 Wrist Watch

1 Answer

Timex 1440 time from 24 hour clock to 12 hour


Hi bowingman,

To use 12- or 24-hour time for your watch, please follow the instructions below.

1. Press and hold the "Set" button for 2 seconds. The "Set" button is on the lower right side.

2. Press the "Date Advance" button on the upper right side. This will reset the seconds.

3. Press the "Change Mode" button on the lower left to set the hour. The hour will flash. Press the "Date Advance" button until the correct hour is displayed.

4. Press the "Change Mode" button again to set the correct 10s unit (first digit 1 or 0) for the minutes. Press the "Date Advance" button until the correct first digit of the minutes is displayed. Repeat this step to set the second digit of the minutes.

5. Repeat Steps 1 through 4 of this section to set the year, month, date and day and whether to use 12- or 24-hour time for your watch.

6. When finished, press the "Set" button (on the lower right) to return to the current time view and lock in your settings.

Hope it helps.

Thank you for using FixYa.

Oct 09, 2009 | Timex 1440 Nylon watch

3 Answers

Set time on Touch Screen Thermo Clock


Hi there,

Just in case you didn't manage to set the time / date on your tocuh screen thermo clock, I'll try to help you from my experience (no available manual at the moment!).

1. To set the time, touch the clock icon on the upper left corner;
2. Keep touching the screen for longer than 5 seconds, on the hour area;
3. Touch the hour area until you get what you want (if you prefer the 24 hour display style, touch repeatedly until you get the right hour without the AM / PM indicator next to it);
4. Touch the clock icon again to start the clock;
5. Repeat steps 1 to 4 to set up the minutes (the hour area will be replaced by the minutes area);
6. To set the date, tocuh the calendar icon on the left hand side;
7. Keep touching the screen for longer than 5 seconds, on the year area;
8. Touch the year area until you get what you want;
9. Touch the month area until you get what you want;
10. Touch the day area until you get what you want;
11. The screen will reverse to the time display after 5 seconds if no touch.
12. The TEMP (temperature) area, if touched, is toggling between C and Fahrenheit degrees.

P.S. I don't know if it is possible to set an earlier time / date, except touching. I mean, if 2009 is on the screen and you want 2007, you'll keep touching up to 2030 and then from 1901 up to 2007.

Hope it helped.

May 08, 2009 | Watches

4 Answers

Big problem


Push the touch button and then the centre of the screen untill the units deg C 24h etc come up then hold the touch button for 5 seconds. This puts it in sycro mode. You can then use the -+ buttons to make them both point to 12

Feb 24, 2008 | Tissot T-Touch T33759851

1 Answer

How to set the time in the clock


My daughter got a Columbia digital watch for Christmas and lost the instructions. How can we set the time, etc.   Thanks!   Darwin

Dec 27, 2007 | Watches

2 Answers

Analog setting


The solution is in the user manual: pres "mode" six times, then press "adjust". The minute hand can only advance, by pressing "search", holding it pressed or pressing "light" and "search" at the same time. When you are satisfied with the settings, press "adjust" again to finish the procedure.

Nov 13, 2007 | Casio AW80-7AV Wrist Watch

Not finding what you are looking for?
Watches Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Ansel Alberto
Ansel Alberto

Level 2 Expert

248 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...