Question about Canon ImageRUNNER 330s Copier

1 Answer

I have a canon imagerunner 330s and when i power it up it tells me to "Switch Main Power OFF and On" E805. I checked all fuses and they look good What else could it be? If anyone could help. Thanks Mike

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Canon Expert
  • 1,326 Answers

E-805 deals with the fan motors... Check the fuse on the D.C. controler "FU200" may be blown. The book say's to replace FM7.. But, to solve the problem you will need to change FM4 & 7 & 8 at the same time... Good Luck

Posted on May 27, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Canon ImageRunner 330s Error E805, Can't Enter Service Mode


FM1 Heat discharge fan Cools fixing unit.E805 0000 Fan failure
only one in this copier>
The fan is faulty. -
Check the fan connector.
- Replace the fan.
- Replace the DC controller PCB.


Switching between full-speed rotation and half-speed rotation is controlled as described below.
1) Full-speed control
When the CPU on the DC controller outputs a fan full speed signal (FAN_FULL), the fan drive voltage switching circuit supplies a +24 V fan drive voltage to turn
the heat exhaust fan at the full speed.
2) Half-speed control
When the CPU on the engine controller outputs a fan half speed signal (FAN_HALF), the fan drive voltage switching circuit supplies a +16 V fan drive voltage to
turn the heat exhaust fan at the half speed.

E805-0000 (Main body fan error)
When the cooling fan of the main body starts, the fan lock detection signal (FAN_LOCK) has been held at the "H" level for longer than the prescribed time.

also check your low-voltage power supply

Apr 22, 2012 | Office Equipment & Supplies

1 Answer

Ihave canon 400 problems. e051, e901, e805 problems frequently please suggest me


Hello,
by the look at your problems:

E051 - Horizontal registration sensor problems
E001 - Fixing temperature faulty
E805 - The Fan rotation problems

It can be that You have problems with DC contoller ( main pcb ) or the copier is in worst condition and there are faults on every segment.

For E001, you can try to reset error:

1. The following error codes cannot be reset by merely turning off and then on the main power.
They require resetting in service mode:
E000, E001, E002, E003, E004, E032, E717
1) Start service mode, and select COPIER>FUNCTION>CLEAR>ERR.
2) Press the OK key.
3) Turn off and then on the main power.
2. Error codes other than the above may be reset by turning off and then on the main power.
n Detail Code
Some error codes offer detail codes, which may be checked in service mode:
COPIER>DISPLAY>ERR (3rd block from the right)



BUT I THINK THAT THE BEST SOLUTION IS TO CALL SERVICE TO RECTIFY THE PROBLEM OR YOU BUY NEW MACHINE:..

Hope that helps!

Jul 22, 2011 | Canon imageRUNNER 400S Copier

2 Answers

My canon copier IR2016 has functional error E805


there could be a problem with the main fan and or the dc controller could be bad.

May 19, 2010 | Canon imageRUNNER 2000 Copier

1 Answer

Code 014


the fixing assembly need to be rebulit or the fixing gears need to be replaced. the main fuser motor is locking up which tells them the fixing rollers have flat spots on them and have finally caused it to stop rotating

May 09, 2010 | Canon ImageRUNNER 330s Copier

2 Answers

On copier sow display bord "Swith main power off and on E001


When switch on ImageRUNNER 330s Grayscale Copier then no display on dispaly board. But Copier front yellow led is on. Please solve this problem.

May 29, 2009 | Canon ImageRUNNER 330s Copier

1 Answer

The message is E805 and says turn main switch off and back on


This is called low temperature check environment around copier or replace fuse in DC Controller

Nov 23, 2008 | Canon imageRUNNER 400S Copier

1 Answer

The message is E805 and says turn main switch off and back on


this is due to an open circuit or fuse on your dc controler board

Nov 23, 2008 | Canon imageRUNNER 400S Copier

1 Answer

Error Code E805


This may be caused by an open fuse, FU201, on the DC Controller. Although the fuse is available (VD7-0623-000) you may choose to send the DC Controller to an Authorized Repair Facility, because it is soldered to the PCB or you may have to just replace the DC Controller. Could also very well be a pinched wire. First thing I would try would be open the back panel with the machine off then reseat all the connectors going into the DC Controller.

-Jen

Oct 30, 2008 | Canon ImageRUNNER 330s Copier

1 Answer

Error 001Fuser Problem


*then
2+8then
*
this will get you into service mode choose COPIER
then FUNCTION then
CLEAR then
ERR or ERROR then press OK(bottom right hand corner of screen)
turn power off then on

Thank you

Mar 12, 2008 | Canon ImageRUNNER 330s Copier

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2128 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...