Question about Mitsubishi WD-52525 52" Rear Projection HDTV

1 Answer

WD-52525 Hi. Have Mitsubishi wd-52525. Red LED indicator came up. I replaced lamp, same problem. New lamp, just like the old one will turn 1/2 power for about 3-5 sec and then will turn off, at the same time RED led goes on stady. Any Ideas?. Thank you. Hello, Replaced the bulb and the projection flickers in different colors and picture is distorted with small lines. Could this be the capacitors? Please tell me where the capacitors are located. Thank you,

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

You have a bad DM Board. You need to replace it. Changing the capacitors will not cure the problem. Completely replace the entire board

Posted on Jun 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Mitsubishi digital WD-52525, and the "lamp" indicator is illuminated in red. Can I buy a new lamp and replace it myself?


If you have a red led solid. check the fans and make sure they work. Sceond push both input and menu and see what the blink code is?

Jul 08, 2010 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

I have a Mitsubishi WD-52525 and replaced the lamp.


We have runn in to this with this type lamp, And we are a service center so we do hundreds of these. We too have had bad lamps straight from the box so best guess would to take the lamp back Mitshubishi will warenty the lamp for 90 days so act fast

Dec 17, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Wd 52525 red lamp light on but new lamp isn't


HI. the actual issue will be a failed ballast device. replacing this damaged power regulator will fix this issue. you can order your new ballast by clicking the link below.

Ballast(Click here to order)

Sep 02, 2009 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

Lamp Indicator is Red


a 41 error code for a short is usually caused by the power PWB. The power board will need to be replaced

May 30, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Lamp Indicator is Red


Its much more likely that your getting a 34 error which is a lamp abnormality vaused by defective capacitors on the power board. You can get the V26 DLP power PWB repair kit at the following link that should repair the issue. Chances are your old lamp is still good.
http://servicemanuals.vstore.ca/product_info.php/pName/mitsubishi-v26-dlp-power-pwb-repair-kit/cName/repair-kits

May 19, 2009 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Replaced bulb in Mitsubishi WD-52525 and it still does not work


Press the input/device button and the menu button at the same time. Green LED will blink a two digit code blink 1st digit short pause blink 2nd digit longer pause and repeat. Any number of problems can cause this same symptom.

If the red LED your refering to is the Status LED and not the Lamp LED then you have big problems. A red Status LED indicates no communication from the Format board to the DMD board (light engine). 1/2 the time caps on the format board itself the other 1/2 must send entire electronics package to Mitsubishi.

Dec 19, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

WD-52525 Red lamp Indicator


usually with that model when you get a 34 eror code for lamp abnormality, its directly related to the capacitors on the Power Pwb. You can get the V26 Power PWB repair kit at the following link which repairs that issue. It contains the replacement High temp capacitors with the board location numbers and PWB identification as well as the service manual on CD. Heres the link its under their repair kit ctegory.
http://servicemanuals.vstore.ca/

Sep 04, 2008 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

Wd-52525 no image


have you replaced the lamp? If so and it still lights up as red you need the V26 DLP PWB PCB kit to replace the defective capacitors on the PWB the kit has all the capacitors and instructions on CD
Here is the link.
http://servicemanuals.vstore.ca/

Jul 02, 2008 | Mitsubishi WD-52525 52" Rear Projection...

2 Answers

WD-52525


I get the same red lamp led indicator, bought the lamp and I am unable to locate the lamp inside the tv, took the lower back panel out and don't see anything that i can make out the lamp housing. is hard to replace the capacitor and where is the power board located. thanks a mill.

Nov 22, 2007 | Mitsubishi WD-52525 52" Rear Projection...

1 Answer

No picture


Lamps have been known to burn out the power supply to the DM assembly. If there is no visible damage to the lamp, your problem may be the power supply or the board. Good luck.

Oct 09, 2007 | Mitsubishi WD-52525 52" Rear Projection...

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

227 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1210 Answers

The Knight
The Knight

Level 3 Expert

74106 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...