Question about Racer AcerPower F5 PC Desktop

2 Answers

Won't boot and doesn't even get to BIOS

AcerPower f5 won t boot Power comes on but no bios. I thought it might be memory so I changed it and the same problem.

Posted by on

  • 6 more comments 
  • bgriffin4702 May 26, 2009

    There are no error messages and not beeps. The fans come on then seem to slow down but nothing on the screen at all

  • bgriffin4702 May 26, 2009

    The fans stay on but there is nothing on the screen. I also tried a new battery but no help.

  • bgriffin4702 May 27, 2009

    there is no faint image using a flashlight

  • machadojr_fe May 11, 2010

    Ok if you have one try another monitor and let me know the results

  • machadojr_fe May 11, 2010

    Shine a flashlight on the screen is there a faint image?

  • CompuFirm
    CompuFirm May 11, 2010

    Do you see anything on your screen at all? Do you hear system fans running?

  • machadojr_fe May 11, 2010

    Does the machine stay on and does the fan stop?

  • machadojr_fe May 11, 2010

    What exactly happens when you try to boot?
    Is there an error message on the screen?

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 526 Answers

You either have a bad processor or a bad mainboard, most likely its the mainboard.

Posted on Dec 12, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

You definitely have a hardware issue so you need to go through a process of elimination to figure out what it is.

1) try another video card (if you are using a video card)
2) try your on-board video (if you have it)
3) take a look at your motherboard to see if any capacitors look bulged
4) try another power supply (although the computer is getting power, it might not be getting "good" power)

Usually if it is the memory you will at least get a beep. This sounds like it is probably your mobo if it isn't your video card.

Posted on May 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

AcerPower f5 4GB RAM only 3 available


in win 7 it won't shows all RAM, mostly virtual and paging file uses it,don't worry your ram is fine.when cpu require high RAM usage it uses it.

Feb 15, 2014 | Racer AcerPower F5 PC Desktop

1 Answer

Gateway MP8708 Won't boot past BIOS and won't boot into CD/USB/Safe Mode on XP - Blank screen with keyboard dead - Num locks on and wireless light


Windows won't start up? Well, try this Download Tenorshare Data Recovery from its offical site and install it. Burn it into CD/DVD, or USB flash, put into the computer you need to repair, Bios setting. It can make sure your important data will not lose. Best of luck
Related: windows won't start

Aug 25, 2012 | Gateway MP8708 Notebook

1 Answer

Operating systems doesn't boot (BIOS beep codes)?


Do you have video going to your monitor? If not the beeps mean you have a bad memory stick in there. If you have video the beeps are the bios telling you that its not set right. More than likely you have it set to run too fast. Go into your bios find where the processor speed is located and choose a lower freq. rate. Its probably set too high for the memory you have.

Jun 22, 2012 | AcerPower F2 PC Desktop

1 Answer

Won't start bios at start up


Disconnect everything but the RAM, Video and Keyboard and see if it will boot to BIOS. If it does let the BIOS boot remove the RAM and see if that allows BIOS to come up. If it doesn't there is a problem with the Motherboard. If it does with the RAM removed you have incorrect RAM installed or too much.

Nov 18, 2011 | Abit IP-95 Motherboard

1 Answer

Dell Inspiron 600m: No Boot Device. I'm a computer


Have you tried resetting the BIOS defaults? In doing so, it will force IDE re-detection and often resolve vague boot issues.

Sep 11, 2011 | Dell Inspiron 600M Notebook

1 Answer

Bios setting for acer power f5 to convert to xp


you cannot change the OS from BIOS. or are you reffering to load to XP while booting up, if you have two operating system installed. Im sorry your question is not clear

Dec 12, 2009 | Racer AcerPower F5 PC Desktop

1 Answer

Acer Power f5 won't boot up. The power turns on but won't boot an


It sounds like it could be video related, do you have an AGP or PCIe display card? Have you tried reseating it? Just pull out the card and pop it back in and please let me know if it helps.

May 26, 2009 | Racer AcerPower F5 PC Desktop

Not finding what you are looking for?
Racer AcerPower F5  PC Desktop Logo

Related Topics:

391 people viewed this question

Ask a Question

Usually answered in minutes!

Top Racer Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Racer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...